Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹28.8 L+₹93,101.05 (3.34%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹31.3 L+₹3.4 L (12.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹31.5 L+₹3.6 L (13.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹31.9 L+₹4.0 L (14.2%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹39.2 L
EMD Value
₹78,500
Closing Date
26 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Mathura
HQ CWE Mathura
As per tender documents
2023_MES_635083_1
CWE/MTR/E of 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (E) Mathura
As per NIT documents
7 documents required · 7 mandatory
₹500
GE (E) Mathura
₹78,500
Yes
27 Feb 2024
30 Dec 2023
1 Feb 2024
30 Dec 2023
26 Jan 2024
13 Jan 2024
Amount
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 30 mm thick second class factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
S&F Pressed steel frame for doors of size 125 X 60mm frabicated out & 1.25mm thick MS sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.
S&F Pressed steel frame for doors of size 105 X 60mm fabricated out & 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. square tube,supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC molded door shutter 28-30 mm thick (style)with 2 or 6 raised panneled desighned with 2mm thick moulded prelam pvc sheet on front face , 2mm plain colour PVC sheet on back face with partical board core as per specification & drawings.
M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F powder coated Anodised aluminium frame for doors, windows ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work complete all as specified and directed.
S&F Powder coated aluminium window and ventilator shutters, fixed type with or without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.
Supply & fix 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 100 mm long stainless steel hinges complete all as specified & directed
S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.
S&F aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F in repair 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) ISI marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repair 150 mm long aluminium anodised handle, fabricated type complete all as specified and directed.
S&F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified and directed.
S & F in repair floor door stopper of Aluminium anodised body,double leg type with hard drawn rubber shoe 100 mm size complete all as specified and directed.
S&F in repair 25 mm dia stainless steel curtain rod cut to size and fixed in position including brackets,end caps ,wall to wall etc. complete all as specified and directed.
S&F in repair 18/19 mm thick block board Ist quality exterior grade commercial type fixed with screw to timber frame work complete all as specified and directed.
S&F in repair 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F Continuous (piano) hinges width of flaps not exc 40 mm when opened , mild steel, bright finish or electro galvanised complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded fixed to wall complete all as specified and directed.
S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded fixed to wall complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete.
S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete.
S&F 3.00 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane complete all as specified.
Demolition of reinforced cement concrete n exc 15 cm thickness above ground floor
M&L for 50mm thick sand stone slab set and jointed over supports as in chajjas of ground and first floor's windows in cm (1:4) complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, fixed independently,as in chajja of ground and first floors for support of Sandstone slab complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed.
M&L PCC 75mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed.
M&L for 25mm thick sand filling under floors or in foundation incl watering and consolidation complete all as specified and as directed.
M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.
M&L for providing cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges
M&L for forming fair finished drain or channel 30Cm in girth in CM concrete extra cement in Cl form moulds complete all as specified and as directed.
M&L for PCC 1:2:4 type B2 using 40mm graded stone agg as in benching surface drains etc.complete all as specified and as directed.
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and as directed.
Dismantling of stone slab of any description or thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.
M&L for Non skid Ceramic coloured joint free tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L non skid coloured cermic ENDURA tiles n. exc. 0.11 Sqm 10mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Coloured Glazed ceramic tiles in vertical surface 450x350x7 / 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:4) complete all as specified and as directed.
M&L for 20 mm thick Granite black work (in one single piece table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
Rounding to edges of stone slabs one edge , such as in steps, cooking platform and other similar situations complete all as directed.
M&L for 50mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panels complete all as specified & directed.
M&L for filling the joints of plinth protection with mixture of bitumen and sand 1:1 complete all as specified and directed.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required not exc half bricks complete all as specified and directed.
M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.
Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for Brick work with sub class 'B' brick straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & smooth (without using extra cement) complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for 15mm thick rendering in two layer on stone masonry surfaces or surfaces other than fair face of brick work of walls consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4 mixed with liquid water proofing compound (ISI marked) @ 200 gram per bag of cement or as per manufacturer’s instructions, finished fair & even, complete, all as specified and directed. Note : - Supply only water proofing compound shall be measured and paid for separately.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.
M&L rendering 10 mm thick on ceiling surfaces in CM 1:3 finished even and fair complete all as specified and directed.
Supply only Liquid water proofing compound of ccomplete all as specified and directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed.
M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundation, filling and mass concrete complete all as directed and as specified
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benchings etc.complete all as directed and as specified
Dismantling PCC tiles / brick tiles or terracing tiles, single layer on roofs laid bedded and pointed in any mortar complete all as specified and directed
Demolition of roof treatment including PCC ,Mud phuska PCC padding,plastering ,APP membrane complete treatment of any thickness and in any position and removing the demolished material out of MoD land complete all as specified and as directed
M&L APP based polymeric membrane not less than 3 mm thick, weighing not less then 3 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embeded during manufacturing process, shall be used. It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets inserted inside the parapet in a grooves.The same shall be finished by a membrane flashing over a coat of cold applied bituminous primer confoming to IS:3384. @ 0.40kg per Sqm complete all as specified and directed.
M &L for Cement concrete plain tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20 mm screed bedding layer in CM 1:4 complete with grey cement and no pigment complete all as specified and directed.
M&L for 40 mm average thick PCC 1:2:4 type B1 (using 20mm grd stone agg) in floors/padding finishing the surface even and fair with out using extra cement complete all as specified and as directed.
Dismantling of AC corrugated sheets in roof covering including ridges, hips, valleys etc complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L Pre- painted galvalume aluminium zinc coating GI based steel plain sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and directed.
Dismantling timber scantlings (framed work) exc 40 Sq Cm in section, in any position complete all as specified and directed.
M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights complete all as specified and as directed .
M&L for 4 mm thick non-asbestos fibre cement building board having fire resistance & moisture resistance properly complete all as specified and as directed .
Fixing only 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework fixed in ceiling complete all as specified.
Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.
Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.
M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and directed.
S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.
S&F in repair bib taps cast copper alloy, chromium plated, fancy type with capstan heads, screwed down, screwed for 15 mm bore dia iron pipes complete all as specified and as directed.
S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia iron pipes complete all as specified and as directed.
S&F in repairs stop valve, 15 mm bore dia cast copper alloy chromium plated with long shank and cup (Concealed type) both ends for iron pipe complete all as specified and directed.
S&F in repairs stop cock angle type cast copper alloy chromium plated screwed down high pressure CP fancy type screwed both ends for iron pipe 15mm bore complete all as specified and directed.
Supply and fix 750 mm long PVC flexible waste pipe 32 mm dia for fixing in urinals and wash basin complete all as specified and directed.
S&F in repair brass chromium plated Towel Rail 600 mm long complete all as specified and directed.
S&F in repair 100 mm dia Swivel shower of cast copper alloy chromium plated any colour for fixing with 15mm pipe complete all as specified and directed.
S&F in repair Shower arm cast copper alloy chromium plated 15 mm size, 195mm long with bend of 45degree with flange any colour (Minimum weight 40gms) complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal fitted with oval access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fitted with oval access door complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed.
S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair PVC cabinet with mirror, size 350 mm x 450 mm, fixed to wall with screws complete all as specified and as directed.
S&F in repair stainless steel soap dish fixed to wall complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including waste chain and plug, bracket fixed complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and as directed.'
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.
M&L for repair 150mmx 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and directed.
S&F in repair Vitreous china Urinal, hailf stall type, white excluding flushing cister & flush pipe but including waste pipe & waste fitting and including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cememt complete all as specified and directed.
S&F in repair Auto closing concealed urinal flush valve 15mm bore chromium plated cast copper alloy with wall flange,chromium plated screwed down, high pressure fancy type screwed both end for iron pipe or for unions and fixed complete all as specified and directed.
Dismantling existing water tank setting aside for cleaning and refixing after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.exc 250 ltrs and n exc 500 ltrs and fixing the tank again complete all as specified and directed.
Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as specified and directed.
Dismantling water tanks exc 250 ltrs and n exc 500 ltrs complete all as specified and as directed.
Dismantling water tanks exc 500 ltrs and n exc 1000 ltrs complete all as specified and as directed.
S&F Rotational moulded polythelene water tanks white colour triple layers (cylindrical vertical with closed top) hoisted and fixed in position for 750 litres. Storage capacity complete all as specified and directed
Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete all as specified and directed.
Supply only 32mm waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F 20mm bore GI nipple suitable for HDPE water tank complete all as specified and directed.
S&F in 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete all as specified and directed.
S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt complete all as specified and directed.
S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed complete all as specified and directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl preparation of surface spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface including complete removal of existing treatment spray machine, spray hard to receive area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed.
M&L for three coats of white wash on ceiling including preparation of new plaster surface complete.
M&L for Applying three coats of white wash on new wall surface including preparation of surface.
M&L for preparation of old treated surface with complete removal of existing treatment on ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint on walls complete all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old decorative surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.
M&L for complete removal of existing treatment of old surface including brooming down / steel wire brushing, scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint on primed steel surface of any description over 10 cm width or girth complete all as specified.
M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of Oil Bound Distemper over a coat of primer complete all as specified and directed.
M&L applying two coats of cement base paint, white or tinted on new wall surface over a coat of primer including preparation of surface complete all as specified and as directed.
M&l for preparation of old surfaces of wall and applying one coat of whitewash complete all as specified and directed.
Providing 1mm thick wall care putty on surfaces of wall/ ceiling complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out complete all as specified.
Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm int dia of pipe complete all as specified and directed.
M&L for Salt glazed stoneware drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
Demolition of RCC as in cover slabs/ roof slabs of any description( reinforcement cut as required to faciliate demolition ) complete all as directed and as specified.
M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as directed and as specified
M&L for Reinforced cement concret type A-1 1:1.5:3 (using 20mm graded stone aggregate) as in slab supported on wall ,and other similar work complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Form work to edges of concrete flat, roof slabs ,concrete railings, breaks in floors and similar works not exceeding 200 mm thick for fair finished surfaces complete all as specified and directed.
M&L, MS TMT bars 6 to 8 mm dia in reinforcement cut to length bent to shape required including bending, cranking and hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
S&F precast reinforcement concrete (1: 1 1/2 :3) and set in CM 1:4 as in manhole cover slab etc complete all as specified and directed
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed and as specified. ( Note: Credit for above items should be made as per credit Schedule separately)
Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces complete all as directed and as specified.
Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap incl all type of MCB and making good disturbed surface / wall as per existing complete all as specified and directed.
M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II complete all as directed and as specified as described below:- a) One light/ fan/ exhaust fan point controlled by one way switch 5 amp complete.
b) One 3 pin 5 Amps socket point controlled by one way switch on same board.
c) One 3 pin 5 Amps socket point controlled by one way switch on independent board.
All as per item No. 173 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as directed and as specified.
Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as directed and as specified.
Supply & Fixing Modular fan Regulator electronic step type 2M complete all as directed and as specified.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as directed and as specified.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as directed and as specified.
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as directed and as specified.
Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as directed and as specified.
Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as directed and as specified.
Supply and fix LED 9W, suitable for B22 type holder, natural white complete all as directed and as specified.
Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete with down rod , replacement of capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and hanging / refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed and as specified. NOTE:- The spare parts Capacitor & Rubber wheel bush shall be included in the quoted rate.
Dismantle the unserviceable ball bearing and Supply and fix ball bearing suitable for ceiling fan/ Exhaust fan complete all as specified and directed.
Material & labour for removing the defective fan winding of ceiling fan size upto 1200mm / 1400 mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, soldering, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as directed and as specified.
Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as directed and as specified.
M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description complete all as directed and as specified.
M & L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire complete all as directed and as specified. Note: Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM.
S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as directed and as specified including fitting with following MCCB & MCBs with connections :- (i) MCCB 125 Amps, 4 Pole, 16 KA - 01 Nos (ii) MCB SP 6-32 Amps - 12 Nos Note : -MCB & MCB /MCCB DBs shall be of same make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.
S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as directed and as specified.
Supply & fix in replacement of MCB SPN 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.
Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' C' series ,bracking cap 10KA, 240V complete all as specified and directed.
Supply and fix exhaust fan 250mm sweep sturdy engineer plastic body complete with louvers, AC 230 Volt single phase 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as directed and as specified.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 4 core, laid in trenches / duct / fixing on walls / poles or passing through DWC HDPE pipe including connecting with suitable lugs, glands, nuts and bolts and testing including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing , incl dismantling of old unserviceable cable any size & type complete all as specified and directed. Note: DWC HDPE pipe rate shall be included in quoted rate.
Supply and fix exhaust fan 300 mm sweep alongwith louvers/front grill, steel body complete, suitable to work on AC, single phase, 230 Volts, 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as directed and as specified.
Earthing complete all shown as electrical plate No -03 of MES Sch part -I complete all as directed and as specified including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery incl necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.
SHRI RADHA KRISHNA BUILDERS & CO.
M/S CHAUDHARY CONSTRUCTION
brajcon
mh enterprises
M/S PREETI CONSTRUCTION
M/s Hoti Lal Contractor
BOXMARK CONSTRUCTIONS
ARCHI ENGINEERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .