REPAIR AND REPLACEMENT OF JOINERY ROOF SHEET FALSE CEILING ROOF TREATMENT AND CERTAIN BR WORKS ZONE A UNDER GE ARMY DHAR ROAD

Dismantling plain, corrugated or semi corrugated sheeting, of any description, roof coverings complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,eaves etc fixed with self tapping screws as specified complete all as specified as directed.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165. including dismantaling complete all as specified and as directed.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165.including dismantaling complete all as specified and as directed.

S&F expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed.

Dismantling boarding,in wall , celling any description, fixed in any position with nails complete all as specified and as directed..

M&L for providing & fixing False ceiling with Gypsum based ceiling tiles and frame work of size 595 x 595 mm of thickness not less than 4mm thick non asbestos fibre cement designer board ISI Marked with GI powder coated frame angle /tee grid frame work for ceiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottom tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners & dismantling of walls and ceiling board any type complete all as specified and as directed.

M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) of approved design/pattern to flat surfaces incl all necessary MS frame work, 12 mm thick board and fittings as per standard practice and as per manufacturer's instruction reinforced with GI wire mesh incl dismantling of walls and ceiling board any type complete all as specifed and as directed.

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by Engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and as directed

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings, to be finished even and smooth without using extra cement complete all as specified including taking down complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement including taking down complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed. (WPC will be paid separately). including taking down

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.

Preparation of newly plastered surface of walls and apply three coats of white wash complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkali resistant primer and Two coats of putty complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated plastered or un-plastered surfaces of walls and applying two coat of oil bond distemper over a coat of wall care putty averaging 2mm thick, on plasterd surfaces complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half brick thick walls built cement mortor 1:4 complete all as specified and as directed.

Demolition of cement concrete in floors of any description complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 using 20 mm graded crushed stone aggregate over 250 thick lime concrete type E2 ( 1:3 ) with 40mm brick bats as in filling of sunken floors over a layer of polyethylene film black 50 micron over a layer of bitumen blown any grade applied hot (1.5 Kg/sqm) over 10mm thick plaster in cm 1:3 with WPC @2% by wt. of cement including treatment to side wall of sunken complete all as specified and as directed. Note Over all floor area only be measured for payment, rate for side wall deemed to be included.

M&L for PCC 1:2:4, type B1, (20mm graded aggregate)25mm thick as in sub floor including use of necessary forw work complete all as specified and as directed including dismantaling..

M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:4 including dismantaling.complete all as specified and as directed.

All as per item 26 above but in skirtings laid over 15mm thick plaster in CM 1:4 complete all as specified and as directed..

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (square or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:4 including dismantaling. complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar 1:4 including dismantaling. complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished, area of each tiles n.exc 0.36 Sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete including dismantaling complete all as specified and as directed..

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished, area of each tiles exc 0.36 Sqm but not 1.00 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete including dismantaling complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 15mm thick screed bed in CM 1:4 all as specified and as directed including dismantaling complete all as specified and as directed.

M & L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 10mm thick plaster in CM 1:4 including dismantaling. all as specified and as directed.

M & L for machine cut kota stone existing flooring rubbing and polishing complete all as specified and as directed including dismantaling complete all as specified and as directed.

S&F for 14 to 16mm thick granite slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4 including dismantaling. complete all as specified and as directed.

Rounding to edges of kota/marble stone slabs on edge, such as in steps and other similar situations complete all as specified and as directed.

Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc includig cutting of wall where required.complete all as specified and as directed.

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and as directed.

Re-fixing old steel tubing, bore of pipe in 15mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.

Re-fixing old steel tubing, bore of pipe in 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.

Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to store complete all as specified and as directed.

S&F for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.

Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to contractors store complete all as specified and as directed.

S&F for 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in positioncomplete all as specified and as directed.

S&F in repairs for ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F for wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, in repairs complete all as specified and as directed.

S&F for CP brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and as directed.

S&F in repairs for bib taps, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in reparis for pillar cock 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union all complete all as specified and as directed.

Supply and fixing in repairs tubular towel rail 20mm dia brass chromium plated, D type, 60cm long between flanges all as specified and approved complete all as specified and as directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs grating doom 125mm dia of steel (minimum weight 40gms) with waste hole complete all as specified and as directed.

S&F in repairs Waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Taking down CI, AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

All as per item No 58 above but 75/80 mm dia pipes complete all as specified and as directed.

Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

Supply and Fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

S&F in repairs for PVC (SWR) bends/Tee/ Socket, of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.

S&F in repairs for PVC (SWR) bends/Tee of radius, suitable for 75mm dia PVC pipes fixed complete all as specified and as directed.

S&F in repairs for Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed.

S&F in repairs vitreous china squatting pan white oriisa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P-trap including cement concrete bedding and making good the disturbed portion to match with the existing surface of floor,complete all as specified and as directed.

S&F One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx680mmx765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified and as directed.

S&F in repairs vitreous china ware wash down Water Closet (Pedestal) white, including white PVC seat and cover, closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, complete all as specified and as directed..

Supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white,with inlet, including brackets complete all as specified and as directed.

S&F in repairs for vitreous china ware Wash Hand Basin, white, flat back of size 550 x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length with all fittings etc complete all as specified and directed.

S&F in repair Sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed

Taking down chowkhat or frame n exc. 1.5 sqm each but with shutters without taking off shutter from the frame complete all as specified and as directed.

All as per item No 72 above but exceeding 1.5 Sqm but not exc 4.00 Sqm complete all as specified and as directed..

Taking down shutters only of any description area not exc 1.50 sqm each complete all as specified and as directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and as directed.

S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified and as directed.

All as per item No 76 above but size of 105x60mm complete all as specified and as directed.

S&F Steel windows made up of box steel section of 16 gauge MS sheet of outer frame, shutter frame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shown in drg consisting with two nos pintol hinges 100 mm long, two nos stove enemaled tower bolts 150 mm long and one no steel handle, dovetailed are welded each panel complete with necessary cleats and stopers all as specified and as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly openable with outer glazed shutter and inner side wire gauge shutter consisting with 2 Nos pin toes hinges 100mm long 2 Nos stove enamelled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper including taking down complete all as specified and as directed (MS Gaurd bar/grill work will be measured and separately.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securing glass/wire mesh etc size of member of shutter with sash bar as specified complete all as specified and as directed.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. .

Providing Kitchen cabinet /Cupboard shutter in in Repair required size at site made out of 18mm thick MDF made out of 18mm thick one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions complete all as specified and as directed..

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30mm complete all as specified and as directed.

S&F magnetic catcher suitable for kitchen cabinet shutter complete all as specified and as directed.

S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.

S&F for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

S&F for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Taking down shutters of any description n exc 1 Sqm each and refixing in the same opening complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening complete all as specified and as directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and as directed

S&F 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and as directed.

Taking down aluminium doors shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings and panels complete all as specified and as directed.

Supply only for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Anodised Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screwsetc. complete all as specified and as directed.

S&F 4.8 mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repairs door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as directed.

S&F in repair 20mm dia aluminium Drapery rod, coated finish including PVC brackets & end knob as required complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and as directed.

S&F in repair Partition of toughned glass 8 To 10 mm Thick with cleat/clamp semi framed and frame less range. Fixed in wall or aluminum / wood. complete all as specified and as directed.

S&F Roller Blind Curtain/Canvas, manually operated including all acessories required to make it functional complete all as specified and as directed.

Deduct Schedule of Credit of Rs. (-) 76184.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

Please Enable Macros to View BoQ information