(Moulik Nidhi) Maintainance and Renovation of Gym Hall At Sewa Nagar Zone No. 04 Ward No. 14 file No. 70/26X3/3

17.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

17.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM Rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge (Cost of aluminium snap beading shall be paid in basic item):17.3.2 With float glass panes of 5.50 mm thickness

2.21 Treatment of soil under existing floors using chemical emulsion @ one liter per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

2.22 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

9.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters using following hinges. 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

13.42 Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg/10 sqm).

13.46 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.46.1 Two or more coats on walls applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr/10 sqm.

cement concrete grade M-20(Nominal mix) with 20mm maximum size of stone

15 mm cement plaster on the rough side of single or half brickwall of mix : 1:4(1 cement:

Providing and applying 1 mm thick (in two coat) white cement based wall putty of best quality, over plastered surface top repare the surface even and smooth complete