REPAIR TO FENCING AREA DRAINAGE COMPOUND WALL FOOTPATH RR MASONARY HARDSTANDING ETC IN AREA UNDER AGE BR I AT KARANJA

Amount

Disamntling RCC post or struts any section , including taking out embedded portion and making good disturbed ground post embedded concrete including cleaning and cutting of grass,shurbs,bushes etc complete all as specified and directed

Demolition of cement concrete of any description in any position, concrete filling complete all as specified and directed

M & L for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping, bed block etc including necessary form work complete all as specified and directed.

S & F for MS angle iron Hand rails, including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh, any type all as specified and directed.

S & F galvanised security fencing 60mmx60mm with PVC coated mesh made out of 3mm dia MS wire and 1.0mm thick PVC coating through out and fixed to angle iron post including binding works complete all as specified and directed

Same as Item No 6.0 above but fencing fixing only complete all as specified and directed

Supply only Round bars 5 mm dia and over upto and including 10mm dia in stirupps spacers and binders, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia confirming Fe-410-W (Gde-E-250) quality-A or Fe 290 (Gde-E-165) complete all as specified and directed.

Same as Item No 8.0 above but except Steel Bar complete all as specified and directed

S & F in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc including taking down complete all as specified and directed

Same as Item No 10 but Fixing Only complete all as specified and directed

S & F Mild steel screw bolts 11 to 15 mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, length of bolt exe 5cm but n exc 10 cm long complete all as specified and directed.

Demolition of brick or stone work built in any cement mortar complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and as directed.

Same as Item No 14 but except bricks complete all as specified and directed

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

Same as Item No 17 but except stone complete all as specified and directed

M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoarsed or brought upto courses hammer dressing sand stone with max depression on face from straight edge held against the dressed surface n exc 20mm complete all as specified and directed

M&L for key pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM 1:4 complete all as specified and directed.

M&L for rendering 20 mm thick in cement mortar (1:4), in two coats (15 thick backing coat +5mm thick finishing coat) on fair faces of brick work or concrete surfaces, stone wall finished the surfaces even and fair mixed complete, all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc and pointed in any mortar complete all as specified and as directed.

M&L 100mm thick PCC type C-2 (1:3:6) using 40mm aggregate as complete all as specified and directed

M&L for chequered cement concrete tiles 25cm X25cmX25mm thich set, joined and pointed in neat cement slurry in floors with grey cement and no pigment including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L exterior grade fibre reinforced heavy duty cement concrete designer tiles 23+2mm thick layer colour pigment as per 15 1237-1980 (Reaffaired in 2006) design as CHITRA type (samples approved by Engr-in-Charge) over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS-15658-2006, of 80mm thickness, M-40 grade with grey cement and pigment complete all specified and directed.

M & L Machine pressed precast coloured concrete interlocking paver block any shape and size of 60mm thickness with grey cement and pigment complete all specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation complete all specified and directed.

Taking down cement plaster on brick or stone wall etc, including raking out joints, hacking for key, scrubbing down with water etc, and removing to premises outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M & L for preparation of new plastered surface of walls and applying two coats of cement paint and one coat of primer complete all as specified and directed

M & L 100 mm thick PCC 1:2:4 Type B-2 (using 20 mm graded aggregate ) as in hard standing and similar works etc finished cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Forming contraction (Dummy) joints 65mm deep x 10mm wide Grade A filled with sealing compound complete all as specified and directed.

M & L PCC 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) in lintel upto 1.5m clear span,cill, steps,seismic and other similiar bands, plinth courses,string courses, lacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S & F mild steel work in framed work as in doors or gates of angle or other sections, with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging or sliding with and including either hooks and hingesor steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Gde Fe 410 W (Gde E-250 Quality A) complete all as specified and directed.

S & F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as per specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as per specified and directed.

Same as Item No 38 but Fabrication Only complete all as specified and directed

M & L painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer over newly prepared steel surface complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specification and directed by Engineer in charge.

M & L factory made precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setting in CM 1:6 work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces completed all as specified and directed.

M & L mild steel TMT bar 10mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed.

M & L mild steel TMT bar 6 to 8mm dia cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed.

Cleaning existing strom water drain including cleaning of grasses vegitation growth, excavating deposited mud etc at inner faces of drain and removing debries to a distance n exc 50m & depositing where directed (outside periphery area) at a level n exc 1.50m above the starting point complete all as directed.

LAXMI ENTERPRISES

Everest Construction

Dinesh Enterprises

M/s Vishwakarma Enterprises

GB construction

M/s C S Construction Company

Sagar Electricals