video conferencing end point full high definition for groups Video Conferencing End Point Full High Definition For Groups ( 1 ) Technical Specifications Specification Specification Name Values Allowed Values Specification Type of End Point Full High Definition Video Conferencing 1+5 Multiparty Full HD End Point 1+5 Multiparty Full HD End Point Does it require mandatory registration with MCU NA - Video Conferencing System Resolution End point based Full HD(1080p
30) - Minimum Bandwidth Required for Specified video quality at End point/far-site end (Mbps) 1 - The End Point is a point to point system upgradable to Multiparty Video conferencing with full high definition camera and codec for simple installation with a TV LED/LCD display suitable for specified bandwidth of IP network through RJ-45 connectivity: Yes - 1/6 Type of sensor for 1920 x 1080p
in order to accept Full HD resolution video CMOS - Optical zoom 10X 10X Digital zoom NA - Field of View at zoom 65 - Pan range (Degree) +/-100 - Tilt Range (Degree) +20/-30 - Cord and Connector to be supplied Yes - System delivers Full HD video and voice & Full HD content for an overall Full HD experience at specified bandwidth Yes - Video coding support Protocol H.263
H.264AVC
H.264 SVC
H.264 High Profile - System has G-722 G-711/G-729 or equivalent nt wideband audio coding support Yes - System supports sharing of Full HD video and graphics content during the video call Yes - System has live resolution of 1920 X 1080 and deliver Full High definition video at 30fps from 2 Mbps onwards Yes - It is possible to see both the near and far site on one Screen thus making most efficient use of a single display area Yes - System is equipped with one or more Omni directional High Definition Microphones as required to cover large conference room Yes - Number of microphone supports 4 - Number of camera support from the same 1 - 2/6 OEM Number of Ethernet connection points for System supports for RJ-45
10/100/1000 Mbps Base-T Ethernet connection 1 - System supports AES encryption video calls; System has Encryption On and Off capability Yes - Video Codec shall support 16:9 format for supporting LCD/LED display unit and PAL NTSC video standard Yes - Power supply: 230 + or - 10% volts
50 Hz Yes - Shall come with easy to use infra-red hand held remote control with operating distance Yes - All equipment are in compliance with the requirements of ITU-T Standard related to Video Conferencing Yes - System to be IPv6 ready from day one Yes - System uses standards based protocols and the offered system is interoperable with any existing H-323 AVC/SVC based video conferencing equipment in a point to point call on the video conferencing end point; All Hardware and Software required to make it interoperable is included in the scope of supply Yes - Minimum number of I/O ports ( 2 x DVI or 2 x HDMI or 2 x equivalent HD for Video output) 2 XHDMI - Minimum number of ports (1 x HDMI or equivalent for Main Camera) 1 X HDCI (Supports additional hardware in future with advanced face-recognition - 3/6 technology such that it automatically scans the room and seamlessly commands the main camera to appropriately frame the users during a call without any manual intervention.) Minimum number of ports (1 x DVI or 1 x HDMI or USB 3 or higher for PC connectivity) Yes - Recording @1080p on the end point No - System is supplied complete with the following components from the same OEM : (a) Full HD Codec (b) Full High Definition Camera (c) At least one Omni Directional Microphones with suitable connectivity (d) Remote Control (e) Data sharing capability using hardware or software (f) All cables necessary for above features Yes - System is also tropicalized and report available from ILAC/NABL/Govt Lab with all add on if being supplied to buyer as per following requirement (a) Dry Heat Test : For 16 hour at a temperature of 55 degree C in accordance with IS:9000/part-3/sec tion-5/1977 (Reaffirmed 2007) (b) Cold Test : For 4 hour At a temperature of 0 degree C in accordance with IS:9000/part-2/sec tion-4/1977 (Reaffirmed 2007) (c) Damp Heat Test : For 2 Cycles of 24 h each at a temperature of 40 No - 4/6 degree C & 95% RH in accordance with IS:9000/part- 5/section-1/1991 (Reaffirmed 2007) After each environmental test and a recovery period of two hours
the video conferencing system has been checked for complete functional parameters
and the results found satisfactory Type Test Report from ILAC/NABL/Govt lab confirming conformance to above technical specifications - to be made available to buyer No - BIS Registration under CRS of Meity NA - BIS Registration Number and its Validity - - UL/CE certification Yes - if yes
UL/CE certificate Number (Furnished when demanded by buyer ) - - Operating temperature Range (Degree C) 0 to 40 - Operating humidity (%RH) 15 to 80 - Free installation and commissioning Yes - On Site OEM Warranty (Year) 5 5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Amit Kanwat 110001
Dak Bhawan
Sansad Marg New Delhi- 110001 1 15 EMD Required No 5/6 ePBG Required No