Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L1 | Accepted-AOC lowest | |
| 2 | L2₹33.0 L+₹51,963.40 (1.60%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹33.3 L+₹83,343.40 (2.57%)Rejected-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹40.0 L+₹7.6 L (23.4%)Rejected-AOC | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹42.9 L+₹10.5 L (32.3%)Rejected-AOC | L5 | Rejected-AOC not found lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Offg GE
GE Basoli PO lakhanpur Distt Kathua JK
CERTAIN REPAIR TO ROOFING CEILING OTHER BR WORKS IN MD ACCN AND OTM ACCN OF CERTAIN UNITS AT JANGLOT GRN UNDER GE BASOLI
2023_MES_573660_1
GE/BAS-69/2022-23
Open Tender
Civil Works
Item Rate
180 days
Janglot under GE Basoli
class d catg a (i)
7 documents required · 7 mandatory
₹500
GE Basoli
₹90,000
Yes
24 Mar 2023
7 Jan 2023
7 Feb 2023
7 Jan 2023
4 Feb 2023
20 Jan 2023
Amount
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each, complete all as specified and as directed.
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and as directed.
Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm each, complete all as specified and as directed.
S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and as directed.
M&L for Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated, complete all as specified and as directed.
S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); to chowkat, complete all as specified and as directed.
S&F For Pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and as directed.
S&F For Pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm complete all as specified and directed.
M&L For PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats Complete all as specified and directed.
S&F in repair PVC board 18-20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 3.5 Kg/Sqm complete all as specified and as directed.
S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8mm sheet metal CSK screws complete all as specified and as shown on drawing.
S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.
S&F Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed.
S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and as directed.
S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and as directed.
S&F For Powder Coated aluminium single or double leaf door shutter in single or two panels with standered aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make. complete etc. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)
S& F Aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg, complete all as specified and as directed.
S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.
S&F Mild steel hinges medium weight cold rolled size 100mm. complete all as specified and directed.
S&F aluminium handle ,cast type, anodised ,150 mm size. complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and as directed.
M&L for Painting to new wooden surfaces including prepration and applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and as directed.
M&L preparation of old wooden surface and applying one coat of synthetic enemal paint, complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
M&L Painting to old steel surfaces including prepration and applying one coat of synthetic enamel paint, complete all as specified and as directed.
S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, wth hard drawn steel spring, fixed in floor, complete all as specified and as directed.
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the word "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified.
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word" CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified.
S&F in repairs rotational moulded PVC water storage tank 1000 ltr capacity (cylindrical vertical with closed top) hoisted & fixed in position including PVC float valve 20 mm, all as specified in SSR Part-Icomplete all as specified and directed.
S&F in repair rotational moulded PVC water storage tank 500 ltr capacity (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-I complete all as specified and directed.
S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for 15 mmm bore of pipe all as specified & directd.
S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for 20 mmm bore of pipe all as specified & directd.
Supply and fixed gun metal gate valve 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
S&F in repairs 15 mm cp bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.
S&F chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union, complete all as specified and as directed.
S&F in repairs chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking includinf making connections and fixed in position complete in all respect as specified Make : CERA/ Hindware/ Parryware
S&F in repairs flush pipe of polyethylene of low or high density of PVC 32 mm dia, for wash hand basin / sink, complete all as specified and as directed.
S&F in repair Stainless Steel plate rack of size 900mm x 900mm x 250mm made out by 0.80mm thick stainless steel sheet, complete all as specified and as directed. Make: Blue Star/ Neelkamal
S&F in repair sainless steel Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, including bedding in CM to drwaf wall or including fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Make: Blue Star/ Neelkamal
S&F in repair Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe , complete all as specified and as directed, Make:- Hindware or Cera mark.
S&F in repair vitreous china urinal partition white of size 310 x 700mm, complete all as specified and as directed, Make:- Hindware or Cera mark.
S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed, Make:- Hindware or Cera mark.
S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore, complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.
S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed.
S&F in repairs water closet squat pattern with vitreous china white Ist quality water closet Orissa pattern size 580x440mm with integral foot rest and cost iron for S trap complete all as specified and as directed.
S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed.
S&F in repairs EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.
Dismantling of PVC or cast iron pipes jointed in cement mortar and taking out upto 110 mm, complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm bore fixed in trenches or floor/Walls, complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed in trenches or floor/Walls, complete all as specified and as directed.
S&F PVC (SWR) bends of (any radius) with access door of 75 mm bore, complete all as specified and as directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided with access door 110 mm bore, complete all as specified and as directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided 75 mm bore, complete all as specified and as directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided 110 mm bore, complete all as specified and as directed.
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.
S&F PVC (SWR) P trap 110 mm bore, complete all as specified and as directed.
S&F in repair PVC shelves ( size not less than 18") of PTMT fixed with and including chromium plated brass screws and plastic cleats, complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges, complete all as specified and as directed.
Taking up or down steel tubing and connections of 15mm bore dia of pipe, complete all as specified and as directed.
Taking up or down steel tubing and connections of 20mm bore dia of pipe, complete all as specified and as directed.
S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.
S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor etc and taking up or down steel water tubing and connection complete all as specified and directed.
Refixing old steel tubing and connections 15mm bore in new or old position (wall, ceiling ,floors etc) complete all as specified and as directed.
Refixing old steel tubing and connections 20mm bore in new or old position (wall, ceiling ,floors etc) complete all as specified and as directed.
S&F in repairs One piece EWC S Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed. Make :- CERA/PARRYWARE/HINDWARE
Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering all as specified and directed.
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.
S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.
Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position, complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed.
S&F Curtain rod 20mm dia of ms powder coated with incl PVC brackets , Stops, rollers etc. Complete all as specified and directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.
S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.
M&L repairing steel windows by adjusting and welding the hinges all as specified and directed.
S&F in repairs steel handles left/right for steel windows 150mm size all as specified and directed.
S&F in repairs steel stays 300mm length for steel windows all as specified and directed .
S&F For Tiles False Ceiling Of Size 600 x 600 mm including of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel section (galvanised @ 120gms per sqm both side incl) consisting of 3600mm long main "T' of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell br 0.25mm thick.PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden screws at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size27 x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm, long dash fatners, 4mm GI wire spaced at max 1200mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runnner should not be greater than 600mm from adjecent wall than 1200mm long cross T is interlocked between the main T at 600mm center to center to form at grid 1200x600mm grid to form grids of 605mmx605mm. cross T at the ends having lenght more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x9mm thick tiles having light reflectors of >=75% are placed in the grid incl dismantling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation boards slabs blankets, any thickness. Make : M/s Everest, M/s Saint gobain, M/s Boral.
S & F Hollow Profile PVC ceiling consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site Including aluminium Frame, complete all as specified ans as directed..
Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.
M&L Rendering 15 mm thick on brick or concrete surface over internal surface with CM 1:6 surface finished ever and smooth with out using extra cement , complete all as specified and as directed.
M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces, complete all as specified and as directed.
M&L Preparation of new plastered surfaces and applying 3mm thick wall care putty on plastered surfaces, and applying two coats of distemper oil emulsion over putty, complete all as specified and as directed.
M&L Preparation of old plastered surfaces and applying 3mm thick wall care putty on plastered surfaces and applying two coats of distemper oil emulsion over putty, complete all as specified and as directed.
M&L applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete masonry wall surface finished even and smooth without using extra cement mixed with water proofing compound @3% by weight of cement, complete all as specified and as directed.
M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.
M&L For Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.
M&L for rendering 5 mm thick in CM (1:3) with smooth finish in ceiling, complete all as specified and as directed.
M&L for preparation of new plastered surface and applying three coats of white wash on ceiling, complete all as specified and as directed.
M&L for preparation of Old plastered surface and applying three coats of white wash on ceiling, complete all as specified and as directed.
M&L for preparation of old white washed surfaces of wall (plastered or unplastered) for white washing and applying one coat of white wash complete all as specified and as directed.
M&L preparation of old colour washed surfaces of wall (Plastered or unplastered) for colour washing and applying one coat of colour wash, complete all as specified and as directed.
M&L preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint. Complete all as specified and as directed.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base, complete all as specified and as directed.
M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded agg) in plinth protection etc.laid in alternate bays complete all as specified and as directed.
Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor, complete all as specified and directed.
M& L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair without using extra cement complete all as specified and as directed.
M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.
M&L for 15mm thick screed bed in CM 1:6 on roof surfaces making surface smooth for laying of APP Membrane complete all as specified and as directed.
M&L For Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth,not otherwise described, complete all as specified and as directed.
M&L For two coats of Dr. Fixit Chemical mixed with white cement complete all as specified and as directed.
Supply only integral water proofing compound, complete all as specified and as directed.
M&L For 12mm thick Toughned glass doors, automatic doors and similar work with SS mortice 65 mm 4 levers lock and alongwith stainless steel 2 nos handles of size 450 mm including cutting to shape, drilling holes etc complete all as specified and directed.
Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all complete and as specified.
M&L for reinforced cement concrete 1:2:4 type B-1,using 20 mm graded stone aggregate as in shelves etc including form work, complete all as specified and as directed.
M&L For TMT Steel bars 8 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.
M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed.
M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) , all complete and as specified.
M&L Granite black colour of any type 18mm thick machine cut as in cooking plateforms and over 15 mm thick sreed bed in cement mortar ( 1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.
Taking down cement plaster/wall tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Glazed ceramic coloured tiles in vertical surfaces 450x300x7 / 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.
S&F Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile exc 0.11 and not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes, complete all as specified and as directed.
Taking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Virified coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes, complete all as specified and directed.
S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but n . Exc 0.11 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of walls and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparation of surfaces and applying two coat of white putty and using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.
S & F Hollow Profile PVC Wall Lining consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site Incl Aluminium Frame, all complete and as specified.
S&F Cast iron body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed.
Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and as directed.
M/S NEERAJ ENTERPRISES
Ms International Engineers
Amrik Construction co
Ashoka Engineers
Standard engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .