Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.5 LAccepted-AOC | L1 | Accepted-AOC L-1 | |
| 2 | L2₹60.8 L+₹21,559.83 (0.36%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Non Responsive |
| Sl No | Description | Qty | Unit | N K Enterprises L1 | M/s Ajeet Kumar Gupta L2 |
|---|---|---|---|---|---|
| 1.00 | Extra for Cleaning the old Surface by Scrapping the entire old white wash or colour wash including cost of scafolding all complete as per direction of E/I. | 698.65 | M2 | 12 ₹8,383.8 Lowest | 13 ₹9,082.45 |
| 2.00Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | |||||
| 2.01 | 12.5 mm thick tapered edge gypsum moisture resistantboard | 243.81 | M2 | 1,247 ₹3,04,031.07 Lowest | 1,247 ₹3,04,031.07 Lowest |
| 2.02 | Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete as per direction of E/I. | 558.92 | M2 | 214 ₹1,19,608.88 Lowest | 214.5 ₹1,19,888.34 |
| 3.00 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. | 558.92 | M2 | 249 ₹1,39,171.08 Lowest | 249 ₹1,39,171.08 Lowest |
| 4.00 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. | 139.73 | M2 | 219 ₹30,600.87 Lowest | 219 ₹30,600.87 Lowest |
| 5.00 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : as directed by Engineer-in-charge. | 20 | Each | 299 ₹5,980 Lowest | 299 ₹5,980 Lowest |
| 6.00Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||||
| 6.01 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 300.38 | Kg | 433 ₹1,30,064.54 Lowest | 433 ₹1,30,064.54 Lowest |
| 7.00 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings
shall be paid for separately)
Powder coated aluminium (minimum
thickness of powder coating 50 micron) | 226.92 | Kg | 517 ₹1,17,317.64 Lowest | 517 ₹1,17,317.64 Lowest |
Tender Value
₹60.8 L
EMD Value
₹1.2 L
Closing Date
3 Oct 2025, 11:00 amClosed
E.E. BCD Building Division No.-2, Ranchi
E.E. BCD Building Division No.-2, Ranchi
Renovation of Room No-411, 412 (Principal Secretary Chamber, Department of Urban Development and Housing), 413, 414, 415 and 439 (Office of the Department of Urban Development and Housing) at 4th Floor Project Building at HEC, Dhurwa, Ranchi.
2025_BCD_105283_1
08/2025-26/EE/BCD/DIV-2,RANCHI
Open Tender
Civil Works - Buildings
Works
60 days
Ranchi
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹1.2 L
19 Nov 2025
27 Sept 2025
4 Oct 2025
27 Sept 2025
3 Oct 2025
27 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .