SPECIAL REPAIRS TO ROAD FROM LAL BAZAR CIRCLE TO TECHNO CHOWK AND MH CIRCLE TO CSD DEPOT CIRCLE UNDER GE(SOUTH) SECUNDERABAD

Amount

M&L for repairs to pot holes not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying tack coat of 5 kg per 10 sqm using paving bitumen VG-30, putting in premixed bituminious macadam, well rammed and sealed with binder 9.80 kg per 10 sqm VG-30 blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc. 30 mm all as specified and as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc. 400 sqm and exc 50 mm and n exc 100mm deep complete all as specified and as directed.

M & L for 75 mm mm thick Water bound macadam (WBM) (compacted thickness) with granite, trap or basalt coarse aggregates of grading 2 (63mm to 40mm size) spread, rolled using power roller exceeding 8 ton and not exc 12 ton capacity and consolidated to camber and gradient required all as specified and as directed.

M&L for preparing unsurfaced WBM surfaces brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen VG-30 grade complete all as specified and directed.

M & L for premix bituminous macadam using paving bitumen any penetration @ 4% by weight of total mix, laid / rolled compacted to required gradient and camber( consolidated thickness 75mm or less) all as specified and as directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with mechanical air compressure to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG-30 grade complete all as specified and directed.

M&L for bituminous premixed semi dense asphaltic concrete consolidated thickness 30 mm with 5.5 % binder content by weight of total mix using paving bitumen VG -30 grade, mixed in hot mix plant, rolled and compacted to required camber and gradient by using mechanical paver complete to a uniform surface all as specified and directed.

M&L for applying thermoplastic road marking paint (reflective) of specified shade or colour, 2.5 mm thick not exceeding 10 cm width with glass beeds 250gm/sqm including layout of centre line, dashes, arrows, speed breakers, writting letters etc., using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser propane tank heater and profile shoe heater driven by experienced operator, on road surface made free of all dirt, scales,oil grease, foreign materials etc., complete all as specified and as directed.

S&F road cat eyes of approved make pasted with the adhesive as per manufacturer instructions. Make: Mr. Illumination/ 3M / Aktion / Dark eye

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out as in hard/dense soil all as specified and as directed.

M&L for Moorum/red bajri filling in in berms , pavings, laid in layers n exc. 150mm thick, spread, levelled and rammed including watering using light weight roller all as specified and as directed.

Removing excavated soil, to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point.

Removing excavated soil, to a distance exc 250 m but n. exc 500 m and depositing where directed at a level n. exc 1.5 m above the starting point.

S&F in repairs road delinators as per IRC-79-1981 (road way indicators) dual directions, retro reflective, round delinator made out of MS channel 75x40x6 mm of height 1200mm with high rade reflective sheathing and grill size 25x25mm GI grill painted with epoxy painted and the poles shall be grouted in PCC 1:2:4 type B1 and foundation of size 450x450x600 mm complete, all as specified and directed. Make : 3M / Mr. Illumination

S&F road studs, aluminium alloy and polycarbonate of size 110x110x26mm with battery 1.2 Volts, model No. SRS4L and installed using epoxy adhesive as per manufacture's instructions complete all as specified and directed Make : TAT BP Solar/ BONS LIGHT PVT LTD. AHMEDABAD / ASIAN CONTROL, Mumbai / AKTION

M & L for soling (or sub base) 100mm thick (spread thickness) with crushed/broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidating to required camber and gradient all as specified and as directed.

M & L for 150mm mm thick Water bound macadam (WBM) (compacted thickness) (in two layers 75mm thick each layer) with granite, trap or basalt coarse aggregates of grading 2 (63mm to 40mm size) or of grading 3 (50mm to 20mm size), spread, rolled and consolidated to camber and gradient required all as specified and as directed.

Excavation in trenches not exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for foundations laying cable, poles etc.or for shafts, manholes etc., and getting out in hard/dense soil complete all as specified and as directed

M&L for PCC 1:4:8, type D2( using 40mm size graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for stone walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

M&L for flush pointing to random rubble masonry uncoursed or brought up to course in cement mortar 1.:4 complete all as specified and directed

M&L for PCC 1:3:6 using C1 using 20mm size graded stone aggregate) for coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm size graded stone aggregate) as in surface channels and drains bed complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each in soils all as specified and as directed.

S & F reinforced concrete pipes class NP3 laid and jointed complete with coller of 600mm bore complete all as specifed and directed

M & L Reinforced cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab as in shelves and like complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length bend to shape required including cranking, bending, sprillay for hooping for columns, hooking ends and binding with and including MS wire (annealled) not less than 0.90 mm dia complete all as specified and as directed.

M&L Formwork to sides and soffits of suspended slabs such as roof slab, floor slab landings and similar work; not exceeding 200 mm thick (Horizontal or sloping)complete all as specified and as directed.

M & L for formwork to edges of roof slabs, concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for fair finished surfaces complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in landings, cover slabs (for manhole etc) including necessary form work and set in CM (1:4) complete all as specified and directed. Note:- reinforcement shall be measured and paid separate under respective items

BEKKAM CONSTRUCTIONS

M/S B.SHRAVAN KUMAR

BEEGEE DESIGN SYSTEMS

K CHANDRAPAL REDDY

B RAMACHANDRAIAH AND SONS