Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2 LAccepted-Finance | ₹2 L | L1 | Accepted-Finance L1 |
| 2 | Not L1₹2.4 LRejected-Finance | ₹2.4 L | Not L1 | Rejected-Finance Not L1 |
| 3 | Not L1₹2.5 LRejected-Finance | ₹2.5 L | Not L1 | Rejected-Finance Not L1 |
| 4 | Not L1₹3 LRejected-Finance | ₹3 L | Not L1 | Rejected-Finance Not L1 |
| Sl No | Description | Qty | Unit | DIMPY CONSTRUCTIONS L1 | M/s B.L. Enterprises L2 | ADITYA BHARDWAJ L4 | KRIDHA CONSTRUCTIONS L3 |
|---|---|---|---|---|---|---|---|
| 1.00Laying and Jointing PVC Pipe. Heading | |||||||
| 1.01 | Providing and Fixing Victorian type garden bench of approved design having both side arms
made of moulded single piece cast iron having weight not less than 48kg with back height
720mm (+/- 5mm) and seating height 390mm (approx). Both side arms of bench shall be
connected with 11 numbers M.S. Tubes rectangular type 65x25mm and 16 SW guage thick of
length 1500mm for seating and back purpose with extra support of seating position of bench with 25x25mm M.S. Flat. The bench shall have the provision of hold fasts fixed with all the
four legs embedded in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) of blocks of size 0.23x0.23x0.30 metre including excavation of
pits for four concrete blocks including primer and painting with approved quality of enamel
paint like Berger, Asian, Nerolac Paints etc. Minimum weight of bench shall be 90kg per bench
(The weight of all the steel and cast iron members as mentioned above). The work shall be
executed as per entire satisfaction and directions of Engineer-in-Charge.
Note:
1: The rate is inclusive of the cost of CC Block and excavation.
2: For weight less than 90kg recovery on pro-rata base shall be made.
3: No payment shall be made for weight more than 90kg. | 15 | EACH | 7,500 ₹1,12,500 Lowest | 11,000 ₹1,65,000 | 10,300 ₹1,54,500 | 11,200 ₹1,68,000 |
| 1.02 | Providing and fixing of precast RCC chair bench with arm rest each bench consists of 2 no, L-shaped base support in grey cement colour (thickness 80 mm x90 mm, 890
mm back height; 450 mm front height with base width 690 mm) and 1 no. reinforced
concrete plank in red colour of size 1500 mm x 400 mm x 50 mm and 1 no. of
reinforced concrete plank in red colour of size 1500 x 425 mm x 50 mm total height
of the bench 890 mm manufactured using cement concrete 1:1.5:3 (1cement: 1.5
coarse sand : 3 stone aggregate 12.5 mm nominal size) using vibro compaction
process reinforced suitably to promote long use and to prevent damage during
handling. Transportation & erection, all parts are joined together with galvanised
nuts and bolts of suitable size and all bolts are sealed after assemebly, bench top and
back planks are treated with special anti-corrosive water proof coating so as to make
surface glossy and water proof and as per direction of Engineer-in-Charge. | 5 | EACH | 5,000 ₹25,000 Lowest | 6,000 ₹30,000 | 7,100 ₹35,500 | 5,200 ₹26,000 |
| 1.03 | Providing and fiving name board made of MS Sheet 90x60cm, 1mm thick with frame
of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat
40x6mm, total height of the board above ground level 2.40m, length of legs below
ground 0.30m embedded in CC block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) 30x30x45cm including excavation and removal of
surplus earth with in 50m lead, applying priming coat of approved steel primer,
painting with synthetic enamel paint of approved quality and lettering with enamel
paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge | 10 | EACH | 6,250 ₹62,500 | 4,500 ₹45,000 Lowest | 11,000 ₹1,10,000 | 5,200 ₹52,000 |
Tender Value
Refer Docs
EMD Value
₹7,900
Closing Date
2 Jul 2026, 3:00 pmClosed
EXECUTIVE ENGINEER M-IV CENTRAL ZONE
EXECUTIVE ENGINEER M-IV CENTRAL ZONE
Providing and fixing Benches and Signage M.S Boards at various locations in madanpur Khadar JJ Colony in ward no, 185 (Madan pur Khadar East)/CNZ.
2026_MCD_282111_1
EE(M)-IV/CNZ/TC/2026-27/20-01
Open Tender
Civil Works
Item Rate
30 days
MADANPUR KHADAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹7,900
4 Jul 2026
25 Jun 2026
2 Jul 2026
25 Jun 2026
2 Jul 2026
25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Laying and Jointing PVC Pipe. Heading | |||||
| 1.01 | Providing and Fixing Victorian type garden bench of approved design having both side arms
made of moulded single piece cast iron having weight not less than 48kg with back height
720mm (+/- 5mm) and seating height 390mm (approx). Both side arms of bench shall be
connected with 11 numbers M.S. Tubes rectangular type 65x25mm and 16 SW guage thick of
length 1500mm for seating and back purpose with extra support of seating position of bench with 25x25mm M.S. Flat. The bench shall have the provision of hold fasts fixed with all the
four legs embedded in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) of blocks of size 0.23x0.23x0.30 metre including excavation of
pits for four concrete blocks including primer and painting with approved quality of enamel
paint like Berger, Asian, Nerolac Paints etc. Minimum weight of bench shall be 90kg per bench
(The weight of all the steel and cast iron members as mentioned above). The work shall be
executed as per entire satisfaction and directions of Engineer-in-Charge.
Note:
1: The rate is inclusive of the cost of CC Block and excavation.
2: For weight less than 90kg recovery on pro-rata base shall be made.
3: No payment shall be made for weight more than 90kg. | 15 | EACH | - | - |
| 1.02 | Providing and fixing of precast RCC chair bench with arm rest each bench consists of 2 no, L-shaped base support in grey cement colour (thickness 80 mm x90 mm, 890
mm back height; 450 mm front height with base width 690 mm) and 1 no. reinforced
concrete plank in red colour of size 1500 mm x 400 mm x 50 mm and 1 no. of
reinforced concrete plank in red colour of size 1500 x 425 mm x 50 mm total height
of the bench 890 mm manufactured using cement concrete 1:1.5:3 (1cement: 1.5
coarse sand : 3 stone aggregate 12.5 mm nominal size) using vibro compaction
process reinforced suitably to promote long use and to prevent damage during
handling. Transportation & erection, all parts are joined together with galvanised
nuts and bolts of suitable size and all bolts are sealed after assemebly, bench top and
back planks are treated with special anti-corrosive water proof coating so as to make
surface glossy and water proof and as per direction of Engineer-in-Charge. | 5 | EACH | - | - |
| 1.03 | Providing and fiving name board made of MS Sheet 90x60cm, 1mm thick with frame
of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat
40x6mm, total height of the board above ground level 2.40m, length of legs below
ground 0.30m embedded in CC block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 20mm nominal size) 30x30x45cm including excavation and removal of
surplus earth with in 50m lead, applying priming coat of approved steel primer,
painting with synthetic enamel paint of approved quality and lettering with enamel
paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge | 10 | EACH | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
Tendernotice_2.pdf
PDF • 9.27 MB
BOQ_329152.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .