Construction of community Toilet At Rattihalli Tp Limits

Construction of community Toilet At Rattihalli Tp Limits

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings bridges and such simillar works in all kinds of soils, as per draw...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed raded coarse aggregates and fine aggregates as per relevant IS ...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 6 12 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size upto pli...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works super structure works of bridges upto 3.50 m height. The gr...

Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Plinth beams of Buildings 50 PWD S.R. 2023-24 ...

Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate RCC Beams, Lintels Troughs of Aqueducts 60 PWD S.R...

Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate RCC Roof Slabs 50 PWD S.R. 2023-24 Volume 1 P No 1...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 6 1 cement 6 coarse sand includi...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 3 1 cement 3 coarse sand includ...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, ...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle green...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free wi...

Providing 20 mm cement plaster of mix 1 6 1 cement 6 fine sand to brick stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including c...

Providing 12 mm cement plaster with cement mortar 1 6 1 cement 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of mate...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls 1.25 ltr 10 m² over and including one coat of ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied 0.90L 10 m² over an under coat of primer applied 0.80 L 10 sqm of approved brand and manufacture including ...

Providing fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top bottom rails, covered with heat moulde...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below tolerance 1mm , with wall thickness 2.0 mm 0.2 mm , corners of the door frame to b...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size grani...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ,...

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern C.P. flush bend with fittings C.I. bracke...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and c...

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular sh...

Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g Vol 2 P.NO.118 I.No 13.17.1 PWD S.R. 2023-24

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g Vol 2 P.NO.121 I.No 13.24 PWD S.R. 2023-24

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length Vol 2 P.NO.119 I.No 13.27.1 PWD S.R. 2023-...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with t...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 63 mm dia PVC Elbows VOL-5 PWD S.R. 2021-22...

Supply and delivery at site special moulded variety PVC bend as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 63 mm dia PVC BEND VOL-5 PWD S.R. 2021-22 Pag...

Providing and fixing chlorinated polyvinyl chloride cpvc pipes, having thermal stability for hot cold water supply,including all cpvc plain brass threaded fittting.i c fixing the pipe with clamps at 1...

Providing and fixing chlorinated polyvinyl chloride cpvc pipes, having thermal stability for hot cold water supply,including all cpvc plain brass threaded fittting. this includes jointing of pipes fit...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing on wall face unplasticised rigid pvc rain water pipes conferming to IS 13592 type A, including jointing with seal ring conferming to IS 5382, leaving 10mm gap for thermal expansio...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1 4 1 cement 4 coarse sand C.I. cover with frame light duty 600X850 mm internal dimens...

Providing Placing on terrace at all floor levels polyethylene water storage tank , IS marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pip...

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5mm2 Phase Neutral 1x1.0 mm2 Earth wire FRLS mu...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5mm2 Phase Neutral 1x1.0 mm2 Earth wire FRLS mu...

Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694 1990 confirming ...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides ofnot more than2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.Part - I c...

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. PWD S.R. 2023-24 I No 3.8

Supplying fixing of Porcelain fuse channels with cut out on existing wooden panel using necessary nuts, bolts and washers etc., complete [P No-32 Sl No-3] PWD S.R. 2023-24 b 32 Amps I No 5.7.2

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing replacing of 6 16 32Amps electrical accessories on existing switch board. GROUP A c 6A Three Way 5 Pin Socket PWD S.R. 2023-24 I No 3.14.3

Supplying and fiixing replacing of 6 16 32 Amps electrical accessories on existing switch board 6A SP Switch PWD S.R. 2023-24 I No 3.14.1

Supplying and fixing replacing of 6 16 32Amps electrical accessories on existing switch board. GROUP A d 6 Amps 3 Pin Top PWD S.R. 2023-24I No 3.14.4

Fixing halogen metal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. PWD S.R. 2023-24 I No 13.5

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV SV MH FTL street...

Fixing a ceiling wall mounting fan of all capacities and all types,with necessary clamps and S hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with necessary length of 23 0...

Supplying exhaust fan of 1440 RPM of 300 mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. PWD Electrical CSR 2023-24, IN-6.1 .

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator wh...

Supplying, fixing and wiring Electronic Trivector Meter ETV 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter PWD Electrical CSR 2023-24, I N-5.30

Digging of Pit for providing GI Pipe type Earthing, Hard Soil, Bescom CSR 2023-24, I N-1.6.2

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe 7.3 Kg, Bescom CSR 2023-24, I N-54.01

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each, Bescom CSR 2023-24, IN-51.02

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag, Bescom CSR 2023-24, IN-51.03, PN-22

Aluminium End Terminal Lug , 25 Sqmm Bescom CSR 2023-24, IN-60.03, PN-27

GI Pipe B - Class as per IS-1239, Bescom CSR 2023-24, IN-49.04, PN-16 Part-III , GI Pipe - 40 mm Dia

Epoxy Terminating Kit Pothead suitable for 1.1 kV, LTUG Cable, Bescom CSR 2021-22, IN-35.01, PN-15 , Up to 4C x 50 Sqmm

Hescome Charges,meter board, deposite and Missceleneous and Rounding off

Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually contr...