PROVN OF TRAINING SHED/MULTIPURPOSE SHED AT BORARUPAK MIL STN UNDER GE 872 EWS

NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Lumpsum price worked out by the tenderer for BUILDING & STRUCTURE WORKS as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for SITE CLEARANCE & DEVELOPMENT as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for HARDSTANDING AND PATHWAY as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for FENCING AND GATE as listed in Schedule ‘A’ Part-IX

SCHEDULE 'A' SEC-X (MISCELLANEOUS ITEMS) NOTE: THIS SCHEDULE IS NOT PRE-PRICED BY MES AND THE PRE-PRICED RATE INDICATED AS "RS 0.00" UNDER COL. 5 SIGNIFIES THIS FACT ONLY.

S & F LED type wall mounted light fitting sutable for LED lamp 9-20 W, housing- glass, frosted type, metallic frame complete all as specified and directed.

S & F LED type Bulk Head light fitting sutable for LED lamp 10 W, durable polycarbonate housing, with high impact resistance of IK08 and ability to withstand harsh environmental conditions with IP65 protection with 120 Lm/W efficacy & 4kV inbuilt surge protection complete all as specified and directed.

S & F LED high Bay Light with system wattage not exceeding 120 W with a nominal system efficacy of at least 135 lumen/watt. The LED used shall have CCT of 6000/6500K, SDCM ≤ 5 and CRI≥80 , with micro prismatic/ diffused lenses. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. The luminaire LED shall have declared Lifetime of 50K hours@L70, with 70% of initial lumen maintained till life ends as per LM 80 extrapolation IES TM -21-11 report (LED, Driver & electrical circutry) IEC61547 & IEC 61000-3-2, flicker free ( flicker should be less than 5%), suitale tilt able fitting inclusive of suspension kit or rigid bracket. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK10. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 20 KV/10 KA SPD duly bolted in the Luminaire. The fitting should have The luminaire should be of Class B Serviceability. The LED used in the luminaire shall be COB type. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 120V to 270V, PF≥0.95 @ full load, THD≤10% @ full load as per IEC 61000-3-2, PF >0.95, IP66 IK-10. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2, The luminaire shall have 5 year OEM warranty, LM79 & LM80 Test report from NABL lab for all testing required for LED fixture as per BIS shall be submitted and making electrical connection using 2.5sqmm, 3 core multi-stranded copper conductor PVC insulated and over all PVC sheathed cable form light fitting complete all as specified and directed.

S & F of Exhaust fan 300 mm sweep, copper winding,metal body, four metal blades BEE approved/ISI marked, air delivery shall not be less than 1600 CMH at 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 Volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer complete all as specified.

S&F Air circulator fan 400 mm sweep, copper winding, metal body, metal blades BEE approved/ISI marked, mounted on wall with fixing arrangement, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer complete all as specified suitable for wall mounting.

S & F of Surge Protection Device (SPD) single phase and neutral, T2 -limb, Imax 20 KA per pole complete fixed in distribution board and making connections complete all as specified and directed

Design, Supply, installation, testing & commissioning of wind-driven turbo ventilators, 600–650mm diameter, made from SS 304 grade or anodized aluminum, with sealed bearing/bearing-less assembly, provided with rain guard, bird mesh, including ridge side positioning and waterproof UV resistant Polycarbonate / FRP/EPDM flashing base to match galvalume roofing profile, inclusive of all fasteners, supports, and sealants all as per DBR attached as annexure -- & manufacturer recommendations complete in all respects with 5-year warranty. Complete unit must deliver ≥1,800 CFM at 3 m/s wind speed.

S&F pole mounted shockproof and rustproof Junction Box rectangular shape, 4 way of size 240X130X95 mm indoor/outdoor type including fixing with two nos flat iron clamps of suitable size with necessary mild steel nuts & bolts complete all as specified and as directed.

S&F (FR) PVC insulated and PVC round unsheathed multistranded copper conductor flexible cable of size 1.5 sqmm x 3 core, complete all as specified and directed.

&F (FR) PVC insulated and PVC round unsheathed multistranded copper conductor flexible cable of size 1.5 sqmm x 3 core along with PVC Conduit Pipe laid on ground for used in LED Bollard Lights complete all as specified and directed.

S&F IP 65 rated LED bollard light fitting of capacity 10 watt new generation energy saving, with robust design and efficient light distribution complete all as specified and as directed.

S & F of LED Flood light fitting of high-quality group control enabled integrated LED Flood Light with a minimum system lumen of min 21000 lm and system wattage not less than 150 W with a nominal system efficacy of 140 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. The luminaire LED shall have declared Lifetime of 50K hours@L70B50. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK10. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 20 KV/10KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 120V to 270V, PF≥0.95 @ full load, THD≤10% @ full load. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2.

Supply and installation CPRI approved LT Electric control panel, cubical type, for outdoor use, double door dust & vermin proof floor mounted made out of CRCA steel sheet of 3.15 mm thick and 2.00 mm thick other parts and angle iron legs of size 50mmx50mmx6mm having front and rear hinged doors with front openable shutters for each MCCB/Change Over with spreader & extended rotary handle having hinges on one side and locating arrangements with screws type on other sides completely with fully enclosed bus bar chamber, having electrolytic high conductivity insulated bas bar made but of aluminium strips of rating 400 amps for 3 phase, 415 volts, 50 C/S 4 wire system, with cable entry provision, with suitable lugs gland, voltmeter , Ammeter and phase indicator complete, duly painted with two coats of stove enameled powder coated paint over as coat of red oxide primer complete all as including necessary PCC work of height 45 cm from the ground level all as specified and directed. INCOMMING : (i) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 kA - 01 No (ii) Basic Multifunction Meter Cl 0.5 with RS485 - 01 No. (iii) LED Indicator lamp in three colour RYB - 01 Set of 3.

Please Enable Macros to View BoQ information