Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.9 L+₹99,838.41 (5.02%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹21.1 L+₹1.2 L (5.91%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹21.1 L+₹1.2 L (6.08%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹22.0 L+₹2.1 L (10.8%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Sirsa
GE (AF) Sirsa-125055
Comprehensive Maint to Married Accn of Pocket-1 (Cpl Qtrs) in Domestic Area at AF Stn Sirsa
2023_MES_598452_1
GE/SRA/T-14/2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
GE (AF) Sirsa
Please Refer Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) Sirsa
₹40,000
Yes
11 Jul 2023
27 May 2023
21 Jun 2023
27 May 2023
20 Jun 2023
8 Jun 2023
29 May 2023 - 3 Jun 2023
Amount
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block, Kerb Stones including necessary Formwork and weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L Cement Concrete 1:4:8, type D-2 (40mm graded stone aggregate) 75mm thick as in Fillings, Sub-base to Floors, etc. complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying/fixing of Tiles in Floor, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and as directed.
M&L Non-skid Coloured Ceramic incl dismantling, joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White Cement , laid over and including Screed Bed 15mm thick in CM 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L Non-skid Coloured Ceramic joint free Tiles 400x400x7.0 to 8.0mm thick in skirting , including dismantling, set and jointed in Neat Cement Slurry and pointed in White Cement, laid over and including Screed 10mm thick in CM 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L Coloured/Printed Glazed Ceramic Tiles 450x350x7mm thick in Vertical Surfaces i.e. Dado, including dismantling, set and jointed in Neat Cement Slurry and pointed in White cement, laid over and including Screed 10mm thick in CM 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Floor (Paver) Tiles 300x300x9.0 to 10mm, including dismantling, highly abrasive, Anti-skid, Impact Resistance, laid over and including 15mm thick Screed Bed in CM 1:6, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Granite (of any type) Tiles, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Granite (of any type) Tiles, 18-20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L Reinforced Cement Concrete 1:2:4 (20mm gradded stone aggre-gate) including demolition of the same, in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Item.
M&L Formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
M&L TMT Bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
Demolition Brick work built in Cement mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in CM 1:6, complete all as specified and as directed.
M&L Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 16) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in CM 1:6, complete all as specified and as directed.
M&L Rendering 12mm thick, in CM 1:6 on Brick / Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, including taking down and raking out joints, complete all as specified and as directed.
M&L preparing New Plastered Surfaces of Walls by applying a Coat of Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.
M&L Rendering 5.0mm thick in CM 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, including taking down and raking out joints, complete all as specified and as directed. NOTE: Site for application is at various locations in patches and height varies up to 12M.
M&L preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Rendering 15mm thick in CM 1:4 on Brick /Concrete Surfaces mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, including taking down and raking out joints, complete all as specified and as directed. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item. Site for application is at various locations in patches and height varies up to 12M.
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L preparing New Plastered Surfaces of Walls by applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of Weather Coat Exterior Paint over a coar of cement primer with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, including taking down and raking out joints, complete all as specified and as directed.
M&L preparing New Rough Cast Plastered Surfaces of Walls by applying Two Coats of Weather Coat Exterior Paint over a coat of cement primer with approved Tint as per manufacturer's instructions, complete all as specified and as directed.
M&L Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and fixed-in-repairs, and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface complete all as specified and as directed.
Taking down Chowkat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.
S&F Factory made Solid PVC Door Frame of size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles andPlain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed.
S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.
S&F Aluminium Handle 125mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.
Taking down Pressed Steel Frame of any description (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.
Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.
S&F Pressed Steel Frame for door of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.
M&L for Flush Shutters of 32mm thick, sloid core construction with block board core and plywood face panels, commercial type on both sides and fitted to Frame, complete all as specified and as directed.
M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
M&L Galvanised steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed
M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and Fixed-in-repairs, complete all as specified and as directed.
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.
S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and as directed.
S&F mild Steel Butt Hinge 100mm long (weight not less than 80 Gram) and fixed, complete all as specified and as directed.
S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.
S&F Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and as directed.
S&F Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.
S&F in repairs Mild Steel 150mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate,fixed with screw or welding , complete all as specified and as directed.
M&L preparing New Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
Taking down Steel Window, Ventilator Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, not exc. 1.00 Square Metre Each, complete all as specified and as directed.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed
Taking down Steel Window Frame (without taking off Shutter from the Frame) of any description including Guard Bars/ Grill, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.
M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frame including punching or drilling out old Glazing Pins/Spring Clips, complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
S&F Sheet Glass 4.0mm thick, Frosted quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane of Steel Windows, complete all as specified and as directed.
Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.
M&L Mild Steel Framed Works such as Grills, etc. with Ends of Bars shouldered ; Barred Iron Doors; Ladders;cooler stands and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.
S&F in repair 2mm thick Fibre glass reinforced translucent plain sheeting with side lap fixed with coach screw and washer in roof, wall complete all as specified.
M&L Running Welding Work exc. 2.5 Cm but not exc. 5.0 Cm (thickness of Metal to be welded exc. 6.0mm but not exc. 9.0mm) to Members of existing Door/Window/Ventilator/Guard Bars/ Gate/ Grills etc. Guard Bars in repairs, providing new Hinges to make the Steel Members Functional (as required) including painting the Steel Member to match the existing, complete all as specified and as directed.
M&L preparing New untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
Dismantling/Taking down old existing Wooden Built-in Cup Boards of size 200x100x60 Cm (approx/nearest size) of any description including Making Good to dismantled portion of Brick Walls with Cement Concrete 1:2:4 (20mm graded stone aggregate) or CM 1:3 (as required) and adjoining Surfaces in CM 1:4, complete all as specified and as directed.
S&F Pressed Mild Steel Shutter 0.75mm thick for Built-in Steel Cup Board (Box Type), Godrej Pattern, made to Shape and Size as required at site , necessary Welding , Holdfasts etc. and fixing to Pressed Steel Frame, Locking Device & Mild Steel Handle,Hanging Rod made out from Conduit Pipe 19mm dia, including Set of Mild Steel Socket to hold Hanging Rod , set of Mild Steel Peg Set and Spary Painting with Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. Note: For measurement purpose, only exposed portion from front to be considered.
S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket (shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom (as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed.
Supply & laying Steel Water Tubing 15mm bore (dia), including taking down, Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
Supply & laying Steel Water Tubing 20mm bore (dia), incl taking down, Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.
S&F in repairs Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Short Body ,screwed down, screwed for Iron Pipe or for Brass Ferrule , complete all as specified and as directed.
S&F in repairs Pillar Tap 15mm bore (dia), Cast Copper alloy , Chromium Plated, Fancy type screwed down high pressure, with long screwed Shanks and Fly-nuts, screwed for Iron Pipe , complete all as specified and as directed.
S&F in repairs Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch, screwed both Ends for Iron Pipe or for Unions , complete all as specified and as directed.
S&F in repairs Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe , complete all as specified and as directed.
S&F in repairs Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe , complete all as specified and as directed.
S&F Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down U/s Water Storage Tanks, complete all as specified and as directed.
S&F in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe , complete all as specified and as directed.
M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed. NOTE:- The tank should be refixed after cleaning on the same day.
S&F in repairs Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and as directed.
S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3, complete all as specified and as directed.
S&F in repairs Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back type) with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, Making Good disturbed surfaces in CM 1:3 , complete all as specified and as directed.
S&F in repairs PVC Waste Pipe 32mm dia (bore) having 600mm long and fixed complete to Walls, Ceilings or in Floors, etc., complete all as specified and as directed.
S&F in repairs PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC , complete all as specified and as directed.
S&F in repairs Bath Wall Mixer with 15mm bore (dia) Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges , complete all as specified and as directed.
S&F in repairs Chromium Plated Shower Rose with Shower Arm 100mm, Swival Joint including fixing to Steel Pipe, complete all as specified and as directed.
S&F in repairs Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets, complete all as specified and as directed.
S&F in repairs Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror , complete all as specified and as directed.
S&F in repairs Glass Shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.
S&F in repairs Sink with Drainage Board made of Stainless Steel l.0mm thick Kitchen overall size 915 x 460mm having Bowl size 410x330x160 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in CM to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe, complete all as specified and as directed.
S&F in repairs Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges, complete all as specified and as directed.
S&F in repairs CP Grating Round 100mm dia jointing with Solvent Cement , complete all as specified and as directed.
S&F in repairs PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) , complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors, complete all as specified and as directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with clamps , complete all as specified and as directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with clamps , complete all as specified and as directed.
S&F in repairs PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.
S&F in repairs PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed.
M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of White Wash, complete all as specified and as directed.
M&L preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.
M&L Complete Removal of existing Surface Treatment from Walls, applying a Coat of Wall Care Putty 1.5 minimum thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
M&L preparing Old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of Distemper Oil Emulsion (as approved), complete all as specified and as directed.
M&L preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M & L for waste coupling chromium plated for sink of 40mm dia including fixing, suitable for 32mm dia waste pipe complete and all as directed by Engineer-in-Charge.
S&F in repairs Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed.
M&L Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Machine cut Kota Stone Slab 20-25mm thick in Flooring, laid over 20mm thick Screed base in Cement Mortar 1:4 laid and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
-ditto- but for Machine cut Kota Stone Slab 20-25mm thick in Riser of Steps, Skirting, Dado and Pillar, laid over 10mm thick backing coat of Cement Mortar 1:4 and joined with grey Cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
DCM ENTERPRISES
STAR CONSTRUCTIONS
Ajay Enterprises
NISHTHA BUILDERS
shiv shanker enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .