Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹30.3 LAccepted-AOC NO 7 3RD MAIN ROAD MUNI REDDY LAYOUT HORAMAVU MAIN ROAD BANASAWADI BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹32.8 LRejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹34.9 LRejected-Finance NO 111 BHARATH NAGAR M S PALYA VIDYARANYAPURA VIDYARANYAPURA BANGALORE KARNATAKA 560097 | BENGALURU URBAN | KARNATAKA | 560097 | THIRD | Rejected-Finance BEING NOT LOWEST | |
| 4 | Rejected-Technical | - | Rejected-Technical BID NOT ADMITTED |
Tender Value
₹36 L
EMD Value
₹72,000
Closing Date
1 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
ADDN ALTN TO BLDG NO P16 AT VISHWA VIHAR CAMP UNDER GE AF MARATHAHALLI
2022_MES_521686_1
8937/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) MARATHAHALLI
ALL AS PER ENIT
10 documents required · 10 mandatory
₹500
GE (AF) MARATHAHALLI
₹72,000
Yes
11 Aug 2022
4 May 2022
7 Jun 2022
4 May 2022
1 Jun 2022
18 May 2022
60 days
Amount
M&L for providing and fixing of 12mm thick Gyproc board to the and including Aluminum suspended channels. The channel shall be fixed to the existing ceiling using 50mm x 12mm size channels at grid of every 0.75m horizontally and vertically drop by (0.3m) and (0.25m) all as specified and as diredted by Engineer Incharge. 12mm thick Gyproc board shall be fixed to the suspended channel and necessary co-lighting reverse brackets shall be provided including applied with two coats of plastic emulsion paint over a coat of primer complete all as specified and as diredted by Engineer Incharge
Providing and applying two coats of primer emulsion in form of a wood grain with one coat of touchup over one coat of primer over and including two coats of Acrylic putty to the false ceiling. The surface shall be of approved texture and finished with Asian PU coat melamine polish finish of approved shade of Teakwood color or Walnut shade complete all as specified and as diredted by Engineer Incharge
Preparation of wooden wall surfaces and Providing and applying applying two coats of primer emulsion with one coat of touchup over one coat of primer over and including two coats of Acrylic putty to the walls. Premier emulsion shall be in form of a wood grain with one coat of touchup. The surface shall be of approved texture and finished with Asian PU coat melamine polish finish of approved shade of Teakwood color or Walnut shade complete all as specified and as diredted by Engineer Incharge
Providing a making a wooden wall panelling using 75mm x 75mm section of 2nd class hard wood forming and making 500mm x 500mm wood grid support vertically and horizontally fixed to the existing wall including 12mm thick plywood fixed on the wooden grid and making 75mm recessed depth only to the width required to be fixed with LED co-lighting complete all as specified and as diredted by Engineer Incharge and wall panel surface shall be finished by fixing of 4mm thick MDF board and finished with wooden paint texture finish complete all as specified and as diredted by Engineer Incharge.
Providing and making 50mm x 50mm section of 2nd class hard wood and making 500mm x 500mm wood frame and fixed to the opening jambs and covered with 12mm thick plywood fixed to the grid support both front and back and finishing the surface with Wooden texture paint finishes including primer complete all as specified and as diredted by Engineer Incharge.
Providing and applying two coats of Acrylic Texture Paint emulsion of approved shade over one coat of wall primer over and including two coats of wall putty for the internal wall surface complete all as specified and as diredted by Engineer In charge.
Providing 50mm x 50mm section of 2nd class hard wood and making a wooden wall panelling using 500mm x 500mm wood grid support at every 500mm x 500mm vertically and horizontally fixed to the existing 600mmdia round pillar and fixing 12mm thick plywood to the grid support complete all as specified and as diredted by Engineer In charge.
Removing building materials, demolished materials and debries etc.to a distance 5 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified
M&L for Warm cove light of approved design and pattern complete all as specified and as per direction of Engineer- In- Charge
S&F for Graphics photo frame (Graphics design printed on vinyl inkjet & mounted on 5mm thick sun board as per the design) fixed on the wall complete all as specified and as per direction of Engineer- In- Charge
S&F Glass wall with graphics design print on one way vision complete all as specified and as per direction of Engineer- In- Charge
Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.
Taking down Split AC 1.5/2 Ton capacity ( Indoor and Out door Unit) with stabilizer by removing all electrical connections and indoor to out door unit gas pipes ,nut bolts from roof top of bldg before starting of civ work and shifting to store for safecustody. After completion of civil work, Refixing /installing Split AC 1.5/2 Ton with voltage stabilizer at the suitable place by connecting all electrical connections and copper piping with insulation (5/8th x 1/4th) with nut bolts as per site requirement, testing and commissioning , if any extra cable , gas pipes , gas filling require at the time of installation the quoted rate is deemed to be included , No nextra cost will be paid to contractor complete all as specified and directed By Engr- In - Charge.
Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store and after false ceiling work hanging only ceiling fan (M.D supply) with extension rod as per site required and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes to accomodate modular switches & plates including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:- (a) One light point /Fan point controlled by one switch.
All as per item No.16 above but wiring complete for One 5 Amps socket point on same board with other switches
All as per item No.16 above but wiring complete for One 5 Amps socket point on independent board.
All as per item No.16 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .
All as per item No.16 above but wiring complete with 4.0 Sqmm for 3 pin 15/30 A socket multipurpose on independent board .
Dismantling / taking down serviceable Tube light fitting and Refixing Tube light fitting any type obtained from taking down same after the repairs of wall/ceiling.
Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed
S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.
S&F modular White cover plate with frame 6 module complete all as specified & directed
S&F modular metal flush box 6 module complete all as specified and directed.
S&F modular White cover plate with frame 12 module complete all as specified & directed
S&F modular metal flush box 12 module complete all as specified and directed.
S&F modular White cover plate with frame 16 module complete all as specified & directed
S&F modular metal flush box 16 module complete all as specified and directed.
Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed
S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply & fixing bell push flush type 5 Amps in replacement of old u/s complete all as specified & directed.
S & F in replacement Door bell AC, 230 volts, single pole in replacement of old u/s bell/ buzzer complete all as specified and directed.
S & F electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.
Supply & fixing of ceiling rose surface three terminals in replacement of old u/s complete all as specified & directed.
S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge
S&F LED strip 22W Flexion LED strip 3000K uses high brightness SMD LED including driver unit as the light source for indoor application complete all as specified suitable for cove-lighting, decorative lighting etc.
M & L for sub main wiring complete with four runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
M & L for sub main wiring complete with two runs of 2 x 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
M & L for sub main wiring complete with two runs of 2 x 2.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
M&L for concealed / surface Rigid non metallic PVC conduit/Casing Caping ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 20 mm external dia, fixed on recessed/surface mounted as required complete and making good disturbed surfaces in repairs all as directed.
S&F Ceiling Lights 'SKYLITE' mini SF surface mounting LED 300mmx300mm Luminaire complete all as specified and directed. (Make- Bajaj/ Philips/ Havells/CG)
S&F Brass metal wall mounted warm light complete all as specified and directed by Engr-in-Charge. (Make- Bajaj/ Philips/ Havells/CG)
S&F black/grey metal wall mounted light complete all as specified and directed by Engr-in-Charge. (Make- Bajaj/ Philips/ Havells/CG)
S & F MCB SPN 32 Amps, 'C' series, 240 V complete including making conections all as specified and directed.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
S & F MCB DB TPN 4Way, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old U/s complete all as specified and directed.
S & F MCB TPN 40/63 Amps incl making connections all as specified and directed.
G K CONSTRUCTIONS
Meghana and Gowda Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .