Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.0 LAdmitted-Finance | Admitted-Finance | |
| 2 | ₹2.4 LAdmitted-Finance NO 16 PALANIAPPA NAGAR SOWRIPALAYAM COIMBATORE 641028 | COIMBATORE | TAMIL NADU | 641028 | Admitted-Finance | |
| 3 | ₹3.2 LAdmitted-Finance 42 MEENACHI SUNDARAM ST KARUNGAL PALAYAM ERODE | ERODE | ERODE | TAMIL NADU | Admitted-Finance | |
| 4 | ₹4.4 LAdmitted-Finance | Admitted-Finance | |
| 5 | Rejected-Technical PLOT NO 69 3RD MAIN ROAD VELACHERY VELACHERY CHENNAI TAMIL NADU 600042 | CHENNAI | TAMIL NADU | 600042 | Rejected-Technical As Per NIT Specification Not Quoated |
| Sl No | Description | Qty | Unit | Mighty Electronics Equipments Coporation | Megatronics | Om Technocrafts Corporation | DB MECH INSTRUMENTS |
|---|---|---|---|---|---|---|---|
| 1.00Supply of Equipment for Electronics and Cmmunication Engineering Department | |||||||
| 1.01 | 8051 Micro controller Kit :
SPECIFICATION :
• Operating voltage: +5 V dc.
• Flash memory: 4 kB (AT89C51) / 8 kB (AT89S52).
• RAM: 128 bytes internal RAM.
• 16 × 2 alphanumeric LCD display
.• Push buttons / tactile switches.
• DIP switches for digital input
.• Inbuilt ADC interface: LDR, potentiometer.
• Inbuilt DAC interface
.• Inbuilt stepper motor driver with stepper motor
.• Inbuilt DC motor driver with DC motor.
• 1 × 4 LED array, 1 × 4 keypad, 1 × relay.
• 1 × buzzer, 16 × 2 LCD display, 1 × PWM driver.
• 1 × hardware interrupt key, inbuilt RTC.
• Inbuilt EEPROM and UART module.
• 4 × 7-segment display.
• Supports both Assembly and C language programming.
• PC interfaceable. | 5 | Nos | 29,950 ₹35,341 Lowest | 31,250 ₹36,875 | 34,000 ₹40,120 | 49,000 ₹57,820 |
| 1.02 | TEMPERATUREMEASUREMENTKITSPECIFICATION :
• Sensors:
RTD (PT-100), Thermocouple (Fe-K/J-type), and/or
Thermistor (NTC).
• Display: 3½ digit LED/LCD digital display
(typically 200 mV FSD).
• Temperature source: Portable water kettle or
heater block.
• Signal conditioning: On-board circuitry for
amplification, linearization, and cold junction
compensation.
• Test points: Multiple 2 mm / 4 mm banana sockets
for monitoring input/output signals.
• Power supply: 230 V ac, 50 Hz, single-phase.
• Accessories: Glass thermometer, 10 k NTC
thermistor probe, K-type thermocouple probe,
patch cords and User manual. | 1 | Nos | 7,990 ₹9,428.2 | 10,500 ₹12,390 | 7,800 ₹9,204 Lowest | 8,800 ₹10,384 |
| 1.03 | Ask modulationandDemodulation kit:
SPECIFICATION :
• Message Signal1:
8-bit variable data,amplitude 5V.
• Message Signal 2:
Debounced data, amplitude low (0) and high (5 V).
• Message Signal 3:
Fixed data 25 kHz, 12.5 kHz, 6.25 kHz, 3.12 kHz,
amplitude 5 V.
• Carrier signal: Sine wave, frequency 200 kHz,
amplitude 5 V.
• Modulator type: Switching modulator using analog
switch / transistor switching IC.
• Demodulator: Envelope detector and LPF.
• Comparator: LM311 based.
• Supply voltage (board): +12 V, +5 V dc.
• Supply current: 100 mA minimum.
• Input voltage: 230 V ac, 50 Hz.
• Interface connectors: 2 mm banana socket. | 1 | Nos | 9,990 ₹11,788.2 | 7,900 ₹9,322 | 6,300 ₹7,434 Lowest | 26,000 ₹30,680 |
| 1.04 | DTH trainer kit:
SPECIFICATION :Power Supply:• 200 V to 240 V ac, 50 Hz.Dish Antenna:
• 1.5 ft aluminium steerable dish antenna.LNB (Low Noise Block Down Converter): • Input frequency: Ku-band.• Output frequency: 950 MHz to 1450 MHz.
• Conversion gain: 65 dB.• Noise temperature: 35 K (max).Set-Top Box Receiver in Trainer Form:• IF frequency: 70 MHz.• Video bandwidth: 50 Hz to 5 MHz.
• Video output level: 1 Vpp at 75 Ω load.
• Video polarity: Normal/Inverted, switch selectable.
• Audio subcarrier frequency:Tunable from 5.0 MHz to 8.0 MHz.• Remote control provided.• HDMI cable: 10 m.
Controls:• Channel selection.• Volume control.
Fault Simulation:• Five built-in simulated faults for troubleshootingexperiments.• IF signal disconnected.• Video output fault.• Audio mute fault.• Tuner misalignment.• RF output interruption.PCB Size:
• 15" × 12" with multicolour section-wise block
diagram.Standard Accessories:• 1.5 ft dish antenna.• LNB.• Trainer PCB.• Dish connecting wire.• Audio-video cable.• User manual.• Acrylic cover.• Hardware materials for assembly of dish antenna.Additional Features:• DTH subscription connection withDoordarshanfree channels. • Free-to-air channel demonstration. | 2 | Nos | 19,980 ₹23,576.4 Lowest | 33,000 ₹38,940 | 21,000 ₹24,780 | 43,200 ₹50,976 |
| 1.05 | FPGA Trainer Kit:
SPECIFICATION :
• Must use industry-standard mid-range FPGA
device
• USB-JTAG programmable, compatible with
Vivado ISE (WebPACK).
• Power supply: 5 V DC through USB or external
adapter.
• On-board peripherals: LEDs, switches, push
buttons, 7-segment display,clock source, GPIO /
Pmod expansion ports, UART, VGA / HDMI, USBUART
bridge, USB cable.
•User manual. | 6 | Nos | 1,31,940 ₹1,55,689.2 | 89,400 ₹1,05,492 Lowest | 2,01,000 ₹2,37,180 | 2,46,000 ₹2,90,280 |
Tender Value
Refer Docs
EMD Value
₹1,600
Closing Date
9 Jun 2026, 6:00 pmClosed
THE PRINCIPAL
GOVERNMENT POLYTECHNIC COLLEGE PALACODE
Supply of Equipment for Electronics And Communication Engineering Department
2026_DoTE_679185_1
2227/A4/2026
Open Tender
Electronics Equipment
Supply
15 days
GOVERNMENT POLYTECHNIC COLLEGE PALACODE
Please refer Tender documents.
3 documents required · 3 mandatory
₹80,000
Yes
₹1,600
Yes
25 Jun 2026
2 Jun 2026
10 Jun 2026
2 Jun 2026
9 Jun 2026
2 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply of Equipment for Electronics and Cmmunication Engineering Department | |||||
| 1.01 | 8051 Micro controller Kit :
SPECIFICATION :
• Operating voltage: +5 V dc.
• Flash memory: 4 kB (AT89C51) / 8 kB (AT89S52).
• RAM: 128 bytes internal RAM.
• 16 × 2 alphanumeric LCD display
.• Push buttons / tactile switches.
• DIP switches for digital input
.• Inbuilt ADC interface: LDR, potentiometer.
• Inbuilt DAC interface
.• Inbuilt stepper motor driver with stepper motor
.• Inbuilt DC motor driver with DC motor.
• 1 × 4 LED array, 1 × 4 keypad, 1 × relay.
• 1 × buzzer, 16 × 2 LCD display, 1 × PWM driver.
• 1 × hardware interrupt key, inbuilt RTC.
• Inbuilt EEPROM and UART module.
• 4 × 7-segment display.
• Supports both Assembly and C language programming.
• PC interfaceable. | 5 | Nos | - | - |
| 1.02 | TEMPERATUREMEASUREMENTKITSPECIFICATION :
• Sensors:
RTD (PT-100), Thermocouple (Fe-K/J-type), and/or
Thermistor (NTC).
• Display: 3½ digit LED/LCD digital display
(typically 200 mV FSD).
• Temperature source: Portable water kettle or
heater block.
• Signal conditioning: On-board circuitry for
amplification, linearization, and cold junction
compensation.
• Test points: Multiple 2 mm / 4 mm banana sockets
for monitoring input/output signals.
• Power supply: 230 V ac, 50 Hz, single-phase.
• Accessories: Glass thermometer, 10 k NTC
thermistor probe, K-type thermocouple probe,
patch cords and User manual. | 1 | Nos | - | - |
| 1.03 | Ask modulationandDemodulation kit:
SPECIFICATION :
• Message Signal1:
8-bit variable data,amplitude 5V.
• Message Signal 2:
Debounced data, amplitude low (0) and high (5 V).
• Message Signal 3:
Fixed data 25 kHz, 12.5 kHz, 6.25 kHz, 3.12 kHz,
amplitude 5 V.
• Carrier signal: Sine wave, frequency 200 kHz,
amplitude 5 V.
• Modulator type: Switching modulator using analog
switch / transistor switching IC.
• Demodulator: Envelope detector and LPF.
• Comparator: LM311 based.
• Supply voltage (board): +12 V, +5 V dc.
• Supply current: 100 mA minimum.
• Input voltage: 230 V ac, 50 Hz.
• Interface connectors: 2 mm banana socket. | 1 | Nos | - | - |
| 1.04 | DTH trainer kit:
SPECIFICATION :Power Supply:• 200 V to 240 V ac, 50 Hz.Dish Antenna:
• 1.5 ft aluminium steerable dish antenna.LNB (Low Noise Block Down Converter): • Input frequency: Ku-band.• Output frequency: 950 MHz to 1450 MHz.
• Conversion gain: 65 dB.• Noise temperature: 35 K (max).Set-Top Box Receiver in Trainer Form:• IF frequency: 70 MHz.• Video bandwidth: 50 Hz to 5 MHz.
• Video output level: 1 Vpp at 75 Ω load.
• Video polarity: Normal/Inverted, switch selectable.
• Audio subcarrier frequency:Tunable from 5.0 MHz to 8.0 MHz.• Remote control provided.• HDMI cable: 10 m.
Controls:• Channel selection.• Volume control.
Fault Simulation:• Five built-in simulated faults for troubleshootingexperiments.• IF signal disconnected.• Video output fault.• Audio mute fault.• Tuner misalignment.• RF output interruption.PCB Size:
• 15" × 12" with multicolour section-wise block
diagram.Standard Accessories:• 1.5 ft dish antenna.• LNB.• Trainer PCB.• Dish connecting wire.• Audio-video cable.• User manual.• Acrylic cover.• Hardware materials for assembly of dish antenna.Additional Features:• DTH subscription connection withDoordarshanfree channels. • Free-to-air channel demonstration. | 2 | Nos | - | - |
| 1.05 | FPGA Trainer Kit:
SPECIFICATION :
• Must use industry-standard mid-range FPGA
device
• USB-JTAG programmable, compatible with
Vivado ISE (WebPACK).
• Power supply: 5 V DC through USB or external
adapter.
• On-board peripherals: LEDs, switches, push
buttons, 7-segment display,clock source, GPIO /
Pmod expansion ports, UART, VGA / HDMI, USBUART
bridge, USB cable.
•User manual. | 6 | Nos | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
cancelled_1.pdf
pdf • 0.10 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
Tendernotice_2.pdf
PDF • 0.14 MB
BOQ_815992.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .