COMPREHENSIVE MAINT OF INTERNAL ELECTRIFICATION OF OFFRS, JCOS AND OR MD ACCN INCLUDING OTM ACCN AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade , along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conduit with all fixing accessories and making good to match with the existing surface of wall complete all as specified and directed for the following :-

One light/fan/bell point controlled by one switch complete all as specified and directed.

One point for socket outlet 5 amps on independent board complete all as specified and directed.

One point for socket outlet 5 amp same board complete all as specified and directed.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

Description same all as per Serial item No 2.00 here in before but for one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 2.5 Sq mm earth wire complete all as specified and directed.

Description same all as per Serial item No 2.00 here in before but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade , along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC casing & caping with all fixing accessories and making good to match with the existing surface of wall complete all as specified and directed for the following :-

One light/fan/bell point controlled by one switch complete all as specified and directed.

One point for socket outlet 5 amps on independent board complete all as specified and directed.

One point for socket outlet 5 amp same board complete all as specified and directed.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

Description same all as per Serial item No 3.00 above but for one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 2.5 Sq mm earth wire complete all as specified and directed.

Description same all as per Serial item No 3.00 above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire complete all as specified and directed.

M&L in replacment for two single core (submain) PVC insulated cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty in PVC Conduit concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed. Note :- (i) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (ii) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4.0 sq. mm + 1x4.0 sq. mm earth wire

2x6 sq. mm + 1x6.0 sq. mm earth wire

2x10 sq. mm + 1x10 sq. mm earth wire

4x10.0 sq. mm +1x10.0 sq. mm earth wire

M&L in replacement for two single core (submain) PVC insulated cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty in PVC Casing & Caping concealed in wall including all conduit and fixing accessories includig making good to disturbed surfaces and colour wash complete all as specified and directed. Note : Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

2x2.5 sq. mm + 1x2.5 sq. mm earth wire.

2x4.0 sq. mm + 1x4.0 sq. mm earth wire.

2x6 sq. mm + 1x6.0 sq. mm earth wire.

2x10 sq. mm + 1x10.0 sq. mm earth wire.

Checking and attending complaints by means of repairing/ rectifying the electric defects/faults related to elctrical equipments, devices, accessories and fixtures maintained by MES daily except sunday and Gazetted holidays complete all as specified and directed. Note : 1. This item covers only cost of labour for attending complaint and replacement of old material. 2. Item to be replaced under this item shall be measured & paid seperatly 'as supply only' under respective items of this schedule 3. Complaints noted as '' NO Light'' shall be attended imediately up to 2200 hrs without fail, failing which recovery of Rs.240/ per complaint per day shall be effected from the contractor's dues. 4. Minor items such as PVC wire of any size as per requirement up to 1.0m length, thimbles, electric tape etc shall deemed to be included in the quoted rate of this items. 5. The complaints shall be attended & defects shall be rectified within 08 hrs commencing from date and time of notifying the complaint slip failing which a penalty @ Rs.120 per complaint per day shall be lavied/imposed on the contractor and recovery shall be made from his dues. In case after checking & attending the defects, if it is not possible to rectfy the defects within 08 hrs ie from 0900 hrs to 1700 hrs, the facts shall be brought to the notice of Engeer in charge by the contractor/his rep immediately and the Engr-in-chargr is satisfied with contractor's view, no recovery will be made on this account.

Supply only in replacment of switch piano flush button type 5 amps single pole one way complete all as specified and directed.

Supply only in replacment of switch piano flush button type 15 amps single pole one way complete all as specified and directed.

Supply only in replacment of socket outlet multipurpose 2/3 pin 5 amps flush button complete all as specified and directed.

Supply only in replacment of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

Supply only in replacment of 15 Amps SWITCH SOCKET COMBINED UNITS, 240V complete all as specified and directed.

Supply only in replacment of ceiling fan regulator step type 240 Volt AC complete all as specified and directed.

Supply only in replacment bell push flush type 5 amps complete all as specified and directed.

Supply & fixing in replacement of worn out/rusted sunken box of following sizes with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size along with new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.

100 mm X 100 mm.

175 mm X 100 mm.

250 mm X 200 mm.

Supply and lay cable XLPE insulated heavy duty electric cables with aluminum stranded conductor 1100 volts grade of following cross section area and core complete all as specified and directed

16 Sqmm 4 core.

25 Sqmm 4 core

35 Sqmm 4 core.

50 Sqmm 3.5 core.

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable complete in any type of soil complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and directed.

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M&L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified and directed

M&L (in replacement) for GI tubing 'light grade' with all necessary fittings laid in trenches/ under road crossing/fixed on pole/ wall/ under floor including suitable mild steel FI clamps of required size complete for following sizes :-

50 mm bore.

80 mm bore.

S&F in replacment single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp "B" Curve.complete all as specified and directed.

S&F in replacment of angle/batten type holder insulated body with back plate complete all as specified and directed.

S&F in replacment of call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.

S&F in replacment of modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F in replacment of modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F in replacment of modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F in replacment of modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

S&F in replacment of Modular metal flush box of 12 module complete all as specified and dircted.

S&F in replacment of Modular metal flush box of 8 module complete all as specified and dircted.

S&F in replacment of Modular metal flush box of 6 module complete all as specified and dircted.

S&F in replacment of Modular metal flush box of 4 module complete all as specified and dircted.

S&F in replacment of Modular metal flush box of 3 module complete all as specified and dircted.

S&F in replacment of Modular white plate cover with frame of 12module complete all as specified and dircted.

S&F in replacment of Modular white plate cover with frame of 8 module complete all as specified and dircted.

S&F in replacment of Modular white plate cover with frame of 6 module complete all as specified and dircted.

S&F in replacment of Modular white plate cover with frame of 4 module complete all as specified and dircted.

S&F in replacment of Modular white plate cover with frame of 1/2 module complete all as specified and dircted.

S&F in replacment of Modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified & directed.

S&F in replacement of A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewired ofCat Part No. DHDUCDP0253016-25 Make Havells or equivalant in Anchor / Legrand complete as specified after taking out old unserviceable starter unit complete all as specified and directed.

S&F in replacement of Environmental friendly aesthetically designed ,decorative recess mounted 2W LED spot light for low ceiling height applications as specifed and directed Make ;- Havells cat Part No.LHLDAUSADL8U002 or equivalent in Philips/Bajaj

S&F in replacement of Recess mounted 6W LED downlighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with Independent electronic LED driver for low ceiling height applications as specifed and directed. Make ;- Havells cat Part No.LHEEAQPFIB1W006LHEEAQPFIB1W006 or equivalent in Philips/Bajaj

S&F in replacement of 15 W LED downlighter Ultra slim decorative aluminium casted recess mounted round fixture in white finish with opal diffuser and separate electronic driver ,suitable for low depth ceiling.of Cat Part No LHEBADP7IZ1W015 Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of Slim, compact, auminum die cast edge lit panel. Recess mounted square fixture with opal diffuser and separate electronic driver with high brightness LEDs with diffuser to give glare free light of 12 W LED 6500 K LHEBAEP7IZ1W012. Make :- Havells or equivalent in Philips/Bajaj for low ceiling height applications as specifed and directed

Supply and fixing in replacement of Recess mounted round down lighter Al pressure die –cast heat sink with high brightness LEDs with diffuser to give glare free light of 15 W LED 6500 K LHEBHDP7IZ1W015. Make :- Havells or equivalent in Philips/Bajaj for low ceiling height applications as specifed and directed

Supply and fixing in replacement of Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base Cat part No. LHFOECE1TZ1O014. Make :- Havells or equivalent in Philips/Bajaj for home decor applications as specifed and directed

Supply and fixing in replacement of Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base Cat part No.LHDL03160099. Make :- Havells or equivalent in Philips/Bajaj for home decor applications as specifed and directed

Supply and fixing in replacement of Flexible led strips with uniform light distribution and long lasting adhesive for perfect cove lighting solution Flexion Neo Led Strip 24 W 3000 KHEHDLP5UN1W024. Make :- Havells or equivalent in Philips/Bajaj for ceiling applications as specifed and directed

Supply and fixing in replacement of 36 W LED 6500 K 2'x2' Panel Ultra slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications as specifed and directed.Cat Part No. 36 W LED 6500 K LHEBAEP7PV1W036. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of 40 W LED 3000 K 2'x2' Panel Ultra slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications as specifed and directed.Cat Part No. 40 W LED 3000 K LHEBAEP5PV1W040. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. Cat Part No. 10 W LED 6500 K LHEXACP7IN1W010. Make :- Havells or equivalent in Philips/Bajaj

Supply only in replacement of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. Cat Part No. 20 W LED 6500 K. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. Cat Part No. 20 W LED 3000 K LHEXAWP5IN1W020. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement LED tube rod 4 feet long of 20/21 watt ultra bright tube light with very high efficiancy single side connection suitated for installation in existing T5/T8 with G13 Lamp holder 6500K/ 3000K Havells cat part No- LHFXCENNTN1W020 or equivelent Bajaj/Crompton.

Supply and fix in replacement of Ultra bright LED PLL with very high efficacy suited for installation in existing 2G11 lamp holders to give glare free light Havells cat part No-HERCULESPLL419TL18WLED865SPC or equivelent make in philips and Bajaj

Supply and fixing in replacement of LED LUMENO Lamp 0.5W B22 Green Cat part No. LHLDAEUEMONX05. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of LED LUMENO Lamp 0.5W B22 Red Cat part No LHLDAEUEMPNX0X5. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement ofLED Adore 2.8 W B22 CDL Candle Lamp Cat Part No. LHLDEUEEML8R2X8 complete all as specified and directed. Make :-Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of NU Bulb Plus 9 W 865 B22 3 Star Cat Part No. LHLDEUECNL8R009 complete all as specified and directed. Make :- Havells or equivalent in Philips/Bajaj

Supply and fixing in replacement of LED 9 W INVERTER BULB B22 CDL Cat Part No. LHLDEGEDML8O009 complete all as specified and directed. Make :- Havells or equivalent in Philips/Bajaj

S&F weather - proof MS junction box of size 250mm x200mm x100mm, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos. of polymide gland wtih check nuts fixed on poles with flat aluminium clamps of size 20mmx3mm, nuts, bolts, washers, etc. complete all as specifed and as directed by Engineer in Charge

M&L for painting with green colour synthetic enamel paint including preparation of surfaces to perimeter light stand 2.5 m long 50mm GI pipe complete all as specified and directed.

M&L inreplacement for 50mm bore GI tubing medium grade of length 2.5m with all necessary fittings for as a garden post pole including 2 Nos mild steel FI clamps 35x3mm size to support pipe with pole including PCC work complete all as specified and directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB complete all as specified and directed. Note :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 8 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB complete all as specified and directed. Note :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 16 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB complete all as specified and directed. Note :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 6 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 18 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB complete all as specified and directed. Note :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in replacement of double pole MCB 40-63 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity "B: curve complete all as specified and directed.

S&F in replacment of Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity.complete all as specified and directed.

S&F in replacement of MCCB 125 Amp 4 pole 25 KA at 415 V with fixed thermal megnatic release complete.complete all as specified and directed.

S&F in replacement of MCCB 160 Amp 4 pole 36 KA at 415 V with fixed thermal megnatic release complete.complete all as specified and directed.

S&F in replacment of twin core flexiable PVC cable 1.00 sqmm of multi standrad copper conductor pvc insulated unsheathed cables of 1100 volts complete all as specified and directed.

S&F in replacment of single core flexiable PVC cable 2.5 sqmm of multi standrad copper conductor pvc insulated unsheathed cables of 1100 volts complete all as specified and directed.

S&F (in replacment) post top fitting aluminum sheet spun polyurethane paint (with prior treatments) canopy & transprent imported acrylic cover B22 ABS holder cast aluminum spigot pole entry pro vided 52mm suitable for 12 to 20 W LED Bulb including all fixing accessories complete all as specified and as directed by Engineer in Charge.

M/s A.K Construction

BRIJ MOHAN LAL AND CO.

M/S MG GROUP

M/s NSA Engineering Corporation

New Era Engineers

M/S Amar Enterprises

R.K.ASSOCIATES

SHIV SHANKAR MISHRA