REPAIR/MAINT/SERVICING OF MECH LAUNDARY, BOILER, INCINERATOR WITH OTHER CONNECTED WORKS AT AGE (E/M) HOSP UNDER GE (E/M) LUCKNOW

Amount

Disconnecting all water and electrical connection of the water softener plant by removing all Nuts and bolts and reassemble the same after changing the resin of the cylinder of softener And cleaning of the pipe line connected to boiler with softener for the smooth functioning complete all as specified and directed.

Taking down the economizer and S&F in replacemnet of economizer on the existing position complete all as specified and directed.

Supply and fixing in replacement of water pump - Triplex type of boiler on the existing position complete all as specified and directed. Cat Pt No PGRX60010 Make- Thermax/ Thermo Care/ Sentec

Supply & mixing crystal salt suitable for water Softening plant complete all as specified and directed.

Supply and fixing in replacement of metallic Hose pipe of size 1” of 30” long complete all as specified and directed.

Supply only in replacement of V-belt size A-56 complete all as specified and directed. Make : Fenner/Navyug/Dunlop

Supply only in replacement of pump seal for boilers size 50 mm Bore complete all as specified and directed.

Supply & mixing Softening compound (Chemical Resin T-40 NA) for removal of iron, calcium and magnesium from water to avoid scaling inside hot water pipe line complete all as specified and directed.

Supply only in replacement of burner nozzle 6.0GPH complete all as specified and directed.Make : Danfoss.

S&F in replacement of Rope non-Asbestos complete all as specified and directed.

Supply only in replacement of piston(HTN-1) complete all as specified and directed.

Supply only in replacement of photocell 8203 complete all as specified and directed.

Supply only in replacement of pressure switch PM1 complete all as specified and directed.

Supply only in replacement of flame coke complete all as specified and directed.

Supply only in replacement of digital temperature ammeter Range 0ºC to 250ºC complete all as specified and directed.

Opening dismantling and disconnecting all water Connection and electrical connection of Washer Extractor capacity 60Kg make FABCARE and Reassemble the same for repair after removing nuts and bolts including oiling, greasing and alignment of inner basket, alignment of shaft, pulley alignment, contact set of contactor cleaning, servicing and cleaning of pneumatic kits, air filter cleaning, cleaning the drain system and turning work and reassemble the same for the smooth functioning of the machine.

All as per Srl item No. 16, here in before but 1 Nos Machine 30 kgs capacity complete all as specified and directed.

Opening dismantling and disconnecting all water connection and electrical connection of Drying tumbler capacity of 60Kg make FABCARE and reassemble the same for repair after removing nuts and bolts including Oiling, cleaning, servicing and greasing, balancing and alignment of cylindrical basket, balancing of blower, shaft turning, cleaning and servicing of steam radiator for the smooth functioning of the machine complete all as specified and directed.

Opening dismantling and disconnecting all water connection and electrical connection of flat work Ironer with double roll make FABCARE and Reassemble the same for repair after removing nuts and bolts including Oiling, cleaning, servicing and greasing, balancing and alignment improvement of chest and rollers, servicing and cleaning of Pneumatic kits, servicing of electrical panel and variable frequency drive for the varying of speed of motor.

Disconnecting all electrical connection of the air compressor and taking out cylinder from the compressor and repair the same with replacement of Engine oil, key of shaft and re-fixing the same Including testing complete all as specified and directed.

M&L in replacement of Water solenoid motorized Pneumatic valve 4” of outlet complete all as specified and directed. Make: Sant/Kartar/SK

M&l in replacement of water solenoid motorized pneumatic valve 2” of inlet complete all as specified and directed. Make: Sant/kartar/SK

M&L in replacement of angle valve pneumatic 1” complete all as specified and directed. Make: Jelpec/Janatics/Akari

M&L in replacement of angle valve pneumatic ¾” complete all as specified and directed. Make: Jelpec/Janatics/Akari.

M &L in replacement of touch screen of panel of washer extractor machine as per existing complete all as specified and directed. Make : Kinco/Fabtech/Fabcare

Disconnecting the electric induction motor from the existing machine of any size and taking out the unserviceable winding wire complete and cleaning the slots, rewinding the motor with super enameled copper windings wire of existing gauge including all other insulating material of the capacity 02 HP of any make and re-fixing the same after repair of existing machine Including testing complete all as specified and directed.

All as item no 26 above but capacity of Induction motor 5 HP.

All as item no 26 above but capacity of Induction motor 10 HP.

All as item no 26 above but capacity of Induction motor 15 HP.

Supply and fixing in replacement of MCCB 63 Amp, 4 Pole, 16 KA. complete all as specified and directed.

Supply and fixing in replacement of MCCB 25 Amp, 4 Pole, 16 KA complete all as specified and directed.

M&L in replacement of iron steam resting pad complete all as specified and directed. Make : Fabcare/Fabtech

M&L in replacement of MPD for Drying tumbler complete all as specified and directed.

M&L in replacement of branded bearing 6316 (2RS) for AWX 60Kg complete all as specified and directed. Make:SKF/NTN

M&L in replacement of branded bearing 6317(2RS) for AWX 60Kg complete all as specified and directed. Make SKF/NTN

M&L in replacement of bearing 6313 (2RS) for AWX-30Kg complete all as specified and directed. Make : SKF/NTN/NBC

M&L in replacement of bearing 6314 (2RS) complete all as specified and directed. Make : SKF/NTN/NBC

M&L in replacement of bearing 6315 (2RS) complete all as specified and directed. Make : SKF/NTN/NBC

M&L for Replacement of unserviceable burnt rubber line duct of existing size and thickness at incinerator complete all as specified and directed .

M & L for dismantling/strip opening of primary chamber,burner and other connected accessories and servicing/overhauling of static hearth primary chamber lined with refractory insulation brick of IS-2042 standard having standard operating temperature 800+50 degree centigrade with temp.resistance 1400 degree centigrade including replacement of following unserviceable/damaged parts as required. Items to be replaced will be measures and paid seperately.

Nozzle

Fuel pump

Pressure gauge

Photo cell

Diesel filter

Flexible hose pipe

Inlet oil valve of 1/2"

Sequence controller

H T wire

Disconnecting unserviceable F D fan and servicing/overhauling,oiling and greasing of F D fan including replacement of all bearings etc complete all as specified and directed.

Shailza Traders