Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC E 27 CWE WELLINGTON | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹47.0 L+₹1.6 L (3.42%)Rejected-Finance 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L2 | Rejected-Finance BEING NOT L1 BIDDER | |
| 3 | L3₹49.7 L+₹4.3 L (9.48%)Rejected-Finance C 101 ADG P CHENNAI | L3 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DSSC WELLINGTON
BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
UPGRADATION OF MSQ 41 NEAR JUBLEE GARDEN AT DSSC WELLINGTON
2023_MES_592630_1
8328/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹82,000
Yes
28 Jun 2023
2 May 2023
29 May 2023
2 May 2023
27 May 2023
15 May 2023
Amount
Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section in any position framed or unframed work etc, complete all as specified and as directed.
Dismantling timber scantlings as in fillets, rails, posts rafters, purlins etc., in framed/unframed work, not exceeding 40 sqcm in section in any position, complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.,) sheets in roof, complete all as specified and as directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.
M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, etc complete all as specified and as directed.
M&L walling of random rubble masonry uncousred well bonded, bedded and solidly hearted built in CM 1:4 and pointed the dressed surfaces with same mortar as the work process complete all as specified and as directed.
Description all as per item No 10 above, but except stone complete all as specified and as directed.
Extra over stone walling for hammer dressing for stone as specified in item No.10 above, n.exc 20mm deep when held against at edge complete all as specified and as directed.
M&L PCC solid block 1:3:6 type C1 using 20mm graded stone aggregate masonry built in CM 1:4 complete all as specified and as directed.
Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) complete all as specified and as directed.
M&L for 25mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in flooring to receive tiles etc complete all as specified and as directed
M&L for Glazed ceramic coloured tiles 300 mm x 600 mm x 7 mm thick as in vertical surfaces such as skirtings, dado etc., set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles complete all as specified and as directed. Make :- SOMANY/KAJARIA/RAK CERAMICS
Description all as per item No 16 above, but in skirtings/dado over 15 mm thick backing coat layer of mortar in cement plaster 1:4 complete all as specified and as directed.
M&L for non skid ceramic tiles 8 to10mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 10mm thick screed bed in CM 1:4 complete all as specified and directed. Make :- SOMANY/KAJARIA/RAK CERAMICS
M&L for Granite 18 to 20mm thick jet black (table rubbed and polished) in steps, jambs, pillars, window-cill, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including rounding to the ends of granite and making holes for inserting the gas pipe complete all as specified and directed.
M&L for Machine cut cudappah stone slab 40mm thick fixed with wall as a slab including rubbing and polishing complete all as specified and as directed.
Form work to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works, fair finishing concrete surfaces using steel form work complete all as specified and as directed.
Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, slab etc. also splays between floors and beams fair finished, using steel form work flat surface complete all as specified and directed.
M&L Mild steel TMT bars10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Description all as per Item No.23 above, but 6mm to 8mm dia complete all as specified and as directed.
Description all as per Item No.23 above, but 8 mm dia & over upto and including 10mm dia in stirups, spacers and binders complete all as specified and as directed.
M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed..
M&L for 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venneers: supplied, 35 mm thick fitted to chowkats, complete all as specified and as directed.
M&L for 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6 mm thick lipping patty around the shutter complete all as specified and as directed.
M&L for Pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed. Make : Madhu Industries/ M/s Decan Structural Pvt Ltd, M/s Trisul Industries, M/s AGEW Steel MFG Pvt Ltd, Ahmedabad
M&L for Pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed. Make : Madhu Industries, M/s Decan Structural, M/s Trisul Industries, M/s AGEW Steel MFG Pvt Ltd, Ahmedabad,
M&L for 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6 mm thick lipping patty around the shutter complete all as specified and as directed.
M&L for Steel windows / ventilators (double leaf, gauge and glazed) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and as directed. Make : Madhu Industries, M/s Decan Structural Pvt Ltd, M/s Trisul Industries, M/s AGEW Steel MFG Pvt Ltd, Ahmedabad
M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed. Make : Rajshri Plastiwood, Indore/ M/s Sintex Industries Ltd/ M/s Dura Plast Extrusion/ M/s Janik Developers/ M/s ACCURA Polytech,
M&L for Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and as directed. Make : Rajshri Plastiwood, Indore/ M/s Sintex Industries Ltd/ M/s Dura Plast Extrusion/ M/s Janik Developers/ M/s ACCURA Polytech,
M&L for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F for Aluminium, anodised, barrel tower bolts of extruded section, 200mm long,complete all as specified and directed.
S&F for 300 mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.
S&F for Mild steel cold rolled Butt hinges, medium weight, 100 mm long, complete all as specified and as directed.
S&F for Aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and as directed.
M&L for Hasp and staple (Safety type) aluminium anodised including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and as directed.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.
M&L 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and as directed. Make : SAINT GOBIN/ATUL/ KOHINOOR/GOLD FISH
M&L 4 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and as directed. Make : SAINT GOBIN/ATUL/ KOHINOOR/GOLD FISH
M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in filling of steel chowkats or frames complete all as specified and as directed.
S&F framed work such as grills, grating, guard bars etc., with ends of bars shouldered and /or riveted and similar works conforming to Fe-290 Gde-E 165 complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.
S&F Galvanised, corrugated mild steel sheeting of 0.60mm thickness with two corrugations side lap fixed with coach screws and washers, in roof, walls etc with grade of zinc coating 275 and fixed with L type or J type or cranked hook bolts in lieu of screws complete all as specified and as directed.
S&F Plain, galvanished, mild steel sheeting of 0.60mm thickness, in ridges, hip, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
M&L Hardwood 2nd class clean sawn battens at 30 cm centres exc 15 Sqcm & not exc 25 Sqcm complete all as specified and as directed.
M&L 2nd class hardwood plain fillets square, rectangular or traingular in section, clean sawn, secured with nails or brads exc 13 Sqcm and n.exc 25 sqcm complete all as specified and as directed.
M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.
M&L for ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.
M&L Providing, cement concrete 1:3:6, type C1 in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complete all as specified and as directed.
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and as directed.
Taking down cement plaster, any description, on brick or stone walls, etc., including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster 1:6, on stone masonry surfaces other than fair face of brick work or on one side lathing and finishing the surface even and smooth w/o using extra cement complete all as specified and as directed.
Peparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper over one layer of wall care putty complete all as specified and as directed.
Complete removal of existing treament from old plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper over a thin layer of wall care putty complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls including preparation and applying two coats of weather coating exterior emulsion (APEX ULTIMA of Asian Paints/ Weather Coat smooth in Berger/Nerolac Excel Top Guard of Nerolac) over a coat of primer on walls complete all as specified and as directed.
M&L for complete removal of existing treatment from external walls and applying two coats of weather coating exterior emulsion (APEX ULTIMA of Asian Paints/ Weather Coat smooth in Berger/Nerolac Excel Top Guard of Nerolac) over a coat of primer complete all as specified and as directed.
Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. Make : Apcolite in Asian Paints/ Luxol in Berger/Stain Enamel in Nerolac
Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. Make : Apcolite in Asian Paints/ Luxol in Berger/Stain Enamel in Nerolac
Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes complete all as specified and as directed.
S&F Steel tubes, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and as directed. Make : JINDAL/TATA/ZENITH/PRAKASH /SURYA
S&F in repairs 15mm dia bib tap with flange complete all as specified. Make : Prayag Cat No 7206 or equivalent in Parryware/Hindware)
S&F Steel tubes, 20 mm bore, galvanised, 'medium grade' with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor incl cutting chases for concealed work etc, complete all as specified and as directed. Make :JINDAL/TATA/ZENITH/PRAKASH/SURYA
M&L for Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe 15 mm bore (fixed in repair), complete all as specified all as specified and as directed. Make : Prayag/ Parryware/Hindware /Jaquar)
S&F 15mm dia angle cock with flange complete all as specified Make : Prayag Cat No 7210 or equivalent in Parryware/Hindware) (fixed in repair), complete all as specified and as directed.
S&F peg set 6 complete all as specified Make : Prayag Cat No BEA-30 or equivalent in Parryware/Hindware)
S&F for sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or including cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm (fixed in repair), complete all as specified and directed Make : Prayag or eqivalent in Paryware /Hindware
M&L for Vitreous china squatt pattern pan water closet, orissa pattern, size 580 mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified and as directed. Make :- Cera/Hindustan Sanitary ware/ Parryware/ Hindware
S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 600 mm long PVC connection with PTMT waste coupling (fixed in repair) complete all as specified and as directed. Make : Prayag/Paryware/Hindware
M&L for Viterous china, wash hand basin, (white) of size 550 mm x 400 mm including PTMT waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 600 mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed. Make :- Cera/Hindustan Sanitary ware/ Parryware/ Hindware
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/wall 110 mm mm dia complete all as specified and directed. Make :- Prince/ Finolex/Supreme
S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors/wall 75 mm mm dia complete all as specified and as directed. Make :- Prince/ Finolex/Supreme
S&F 100mm PVC (SWR) floor trap, plain with stainless steel grating including jointing complete all as specified and as directed. Make :- Prince/ Finolex/Supreme
S&F 100mm PVC (SWR) multi floor trap with staqinless steel grating including jointing complete all as specified and as directed. Make :- Prince/ Finolex/Supreme
S&F 110mm dia PVC (SWR) junction single, bends with access door type complete all as specified and as directed. Make :- Prince/ Finolex/Supreme
S&F 75mm dia PVC (SWR) bends complete all as specified and as directed. Make :- Prince/ Finolex/Supreme
S&F 110mm dia PVC (SWR) vent cowl complete all as specified and as directed. Make :- Prince/ Finolex/Supreme
S&F in repairs stainless steel curtain rod 25mm dia incl side caps and single/double brackets, including end bushes and finials complete all as specified and as directed.
M&L for 8mm thick Non asbestos fibre cement building boards fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasterners clips and S&F standard GI frame and channel including three coats of white wash complete all as specified and as directed.
M&L for 2nd class Hard wood decorative Weather boarding, wrought, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed including dismantling of weather borarding complete all as specified and as directed
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, making groove for fixing of glass for ventilator etc complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in plinth protection finished fair & even without using extra cement, complete all as specified and as directed.
M&L Raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses including raking out joints to the joints to existing or new surfaces complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40 mm gradded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.
S&F for angle iron staging (Fe- 290 (Gde E- 165)) for water tanks including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, MS sheet 2mm thick etc. complete all as specified and as directed.
Disconnecting existing tanks 500 ltrs capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and as directed.
Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, including fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Taking down old sub-main wiring incl fixture and fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and as directed.
Note for Item Nos 91 to 93 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.
M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size and thickness fixed flush to wall for mounting switch, sockets etc., with including cutting chases for conduits & sinkings for modular boxes and making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. (a) One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps.
Description all as per Item No 94.00 above,but One switch socket outlet point 5/6 Amps on independent board.
Description all as per Item No 94.00 above, but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.
Note for Item Nos 94 to 96: 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes and making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex. NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.
S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW101, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
S & F Modular Bell Push switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW101, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
Note for Item Nos 98 to 102 : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items where-ever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model:- Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model :- Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv in Legrand/Anchor Roma/Polycab
Note for Item Nos 103 to 106 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches and sockets.
S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/Legrand/Anchor
S&F in repairs call Bell, AC, Bul bul chime type 230 Volt. Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells
S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed including taking down old/unsv fittings. Make : LUKER, Cat No LT510P or techno-commercially equiv in Havells/Philips
S&F Surface and wall mounted LED batten 24 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : LUKER, Cat No LT5M24 or techno-commercially equiv In Havells/PhilipsS or techno-commercially equiv in Havells/Philips
S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Jaguar/Luker
Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with & incl GI Pipe bracket of appropriate dia & necessary fixing arrangements like clamps, nuts, bolts, washers etc. complete all as specified & as directed incl taking down old/unsv fittings. Make: Cat No: ENDURASUNDOWNSL30W LED757PASYBOPC of Havells or techno-commercially Equivalent in Jaguar/Philips/Luker
S&F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOECE1TZ1O014, Model - Stylo or techno-commercially equivalent in Philips/Jaguar/Luker
Supply and fixing in repairs LED lamps of the 10W, 6500K with B-22 base cap all as directed. Make : Havells//Jaguar/Philips
Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates
S & F MCB, DB, TPN, 8 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed by Engr-in-Charge.Make: L&T, Cat No: DBTPN008DD or equvalent in Havells/Legrand. NOTE:The MCCB and MCB's shall be paid separately under relevent items.
S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/ABB.
S&F MCB TPN, 63A rating, 415Volts, 10 KA `C' Series all as specified and as directed. Make: L&T Cat No: BB40630C or equiv in Havells/Legrand.
S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and as directed. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.
S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and as directed. . Make:-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.
Note for the above Items : 1) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
M&L for earthing complete with galvanized steel earth plate electrode 600 mmx 600 mm x 6.3 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. incl taking down old unsv earthing complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete. Make of GI Pipe : TATA/Jindal/Prakash
P K ENTERPRISES
ACE PROMOTERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .