Repair and Maintenance of different pumping stations, construction of pump foundations in the pump rooms for installation of New pumps and change of suction lines, delivery lines, and change of Gate valves and NRVs interfacing with existing pipeline

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Rate for a lead upto 25 meter beyond 1 m from cutting edge : All kinds of soil

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge, 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, Columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Neat cement punning.

12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete - welded.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.10.5.1 Using M.S. angles 40x40x6mm for diagonal brace

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete.Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth including curing in :Cement mortar 1 :6(1 cement : 6 coarse sand)Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 350 gram/m

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (Hessian based self finished bitumen felt) and fourth & final course of stone grit 6mm & down size or pea-sized gravel spread at 6 cubic decimeters per square metre including preparation of surface but excluding grading complete with: Bitumen felt (Hessian based) type 3grade I conforming to Is : 1322

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.

Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade old work (One or more coats applied @ 0.83 liters/ 10 sqm) .

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 150 MM Dia, Medium grade

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 MM Dia, Medium grade

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 MM Dia, Medium grade

Providing & Fixing of Flanges, Sluice Valves Cast Steel 100 MM size in lines interfacing with existing pipeline 100 mm dia including cutting, welding and fixing with all required items and making good for smooth supply of water without any leakge.(All valves, nuts & bolts, packing included).

Providing & Fixing of Flanges, Non-Return-Valves Cast Steel 100 MM size in lines interfacing with existing pipeline 100 mm dia including cutting, welding and fixing with all required items and making good for smooth supply of water without any leakge..(All valves, nuts & bolts, packing included).

Cutting, Fixing of Flanges, Sluice Valves & NRVs 80-100 mm size in the existing lines interfacing with existing pipeline including cutting, welding and fixing with all required items and making good for smooth supply of water without any leakge.(only labour charges and all items required for the work)

Shifting of 150 HP (New) Pump, Motor, Base Frame, Panel from Bidda Store to Soo Nallah-0 Stage. (Only Manual lead from the motorable road)

Shifting of 150 HP (Old) Pump, Motor, Base Frame & Panel from Soo Nallah-0 to Kachharian. (Only Manual lead upto the motorable road)

Shifting of 75 HP (New) Pump, Motor, Base Frame, Panel from Bidda Store to Soo Nallah-1 Stage. (Only Manual lead from the motorable road)

Shifting of 75 HP (Old) Pump, Motor, Base Frame & Panel from Soo Nallah-1 to Kachharian. (Only Manual lead upto the motorable road)

Shifting of 50 HP New Panel from Bidda Store to Dugala Stage. (Only Manual lead frtom the motorable road)

Shifting of 50 HP Old Panel from Dugala Stage to Kachharia . (Only Manual lead upto the motorable road)