Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC HOUSE NO 826 SECTOR 21 PANCHKULA HARYANA 134116 | PANCHKULA | PANCHKULA | HARYANA | 134116 | ₹1.7 L Quoted ₹1.1 L | L1 | Accepted-AOC 1st Lowest |
| 2 | L2₹1.6 LRejected-AOC 15 70 25 PANCHKULA | PANCHKULA | PANCHKULA | HARYANA | 134112 | ₹1.6 L | L2 | Rejected-AOC 2nd Lowest |
| 3 | L3₹1.6 LRejected-AOC | ₹1.6 L | L3 | Rejected-AOC 3rd Lowest |
Tender Value
₹1.7 L
EMD Value
₹3,340
Closing Date
25 Mar 2026, 11:00 amClosed
YOGESHWAR
HSVP DIV 1 Sec 8 Panchkula
Repair of Sub Division No.III Office in Sector 8 Panchkula including mtc. and defect liability period of one year free of cost
2026_HBC_509581_1
202630C18D66 EDFB 44D5 A871 E2581380CD9A269HSV
Open Tender
Civil Works
30 days
Panchkula
Please refer Tender documents.
2 documents required · 2 mandatory
₹250
Yes
₹3,340
Yes
14 May 2026
19 Mar 2026
27 Mar 2026
19 Mar 2026
25 Mar 2026
19 Mar 2026
19 Mar 2026 - 25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 18.19.1:- Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : 1. Decorative veneer facings of approved manufacture [Through Rate] | |||||
| 28.21.1:- Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 1. 18 mm thick [Through Rate] | |||||
| 35.7.4:- Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as pr direction of Engineer-in-charge. 4. In cement mortar [Through Rate] | |||||
| 45.70:- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. [Through Rate] | |||||
| 511.5.3:- 12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate] | |||||
| 611.6.1:- 15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) [Through Rate] | |||||
| 710.50.1:- Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. [Through Rate] | |||||
| 811.58:- Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate] | |||||
| 912.34:- Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. [Through Rate] | |||||
| 1018.23.1:- Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 1. 9mm thickness [Through Rate] | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
BOQ_588381.xls
BOQ • 0.27 MB
AD0155907.pdf
Additional Documents • 3.77 MB
OT0155907.pdf
Other Document • 0.09 MB
Download all tender documents and submit your bid