COMPREHENSIVE REPAIR OF JCOs, ORs MD ACCN IN PIRU VIHAR AND OTHER MD ACCN IN THE AREA OF AGE B/R-III UNDER GE (WEST) NEW DELHI-10

Amount

NOTES FOR ALL ITEMS:- (a) All debris shall be removed/cleared from site by contractor and rate for the same deemed to be included in the respective item of BoQ. (b) Contractor shall be liable to repair of IGL gas pipe line/meter if any damaged during the execution of work. (c) Work shall be executed in multistorey bldgs (i.e. upto & incl G+8). Rate of scaffolding included in item rate. No extra shall be paid and this element should be considered during quoting the rates.

TERMS & CONDITIONS: (a) Maintenance/upkeeping of all the records and status of day to day all kind of related complaints with works by deploying supervisor by manual record from 9 AM to 5 PM including sunday & holidays. Contractor to provide 04 (Four) mobile number at MES service center for enabling the user to lodge his complaint. This number will be attended 24 hrs 07 days work during currency of centre. No additional payment will be made on this ground. The rates also include cost of complaint slips and all consumables etc comprising of following duties:- (i) Details/issue of the complaints received from MES service centre/complaint cell on daily basis for assigning the work to the workers of respective trade. (ii) Updating/feedback of all the complaint received at the service centre by any mode in the MES Complaint cell/updating the status of attending the complaints on daily basis so that the back log is not more than one day/as per required complaint as per time/agreement. (iii) Preparing abstract for unattended complaint on daily, weekly and monthly basis and submitting the same to concerned JE-in-Charge/Engr-in-Charge. (iv) Failure in maintaining Service Centre in working condition shall attract recovery @ Rs. 500/- per day. Spare capacity of individuals after attending emergency complaints may be utilized for attending routine complaints.

(v) The contractor shall take immediate action to attend all complaint lodged on app based system or any complaint assigned to him through site order book / verbal instructions from JE-in-Charge/Engineer-in-Charge or on telephones / through service centre of app based system or through any mode, from occupants. In all cases he shall attend the complaints in the specified duration. All complaints recieved by any mode shall be entered in docket No for the complaint will be raised immediately and notification for the same shall be communicated to user. All complaints received on phone calls will be only registered in the register. (vi) The daily complaint monitoring system on the app based portal will be used for lodging and attending complaints will be provided by the contractor. (vii) The expenditure on account of internet for using app and infrastructure shall be borne by the contractor. Nothing extra shall be paid on this account. (viii) Any complaint raised by user by any means (i.e. app based, telephonically, SMS, Service Centre helpline or any other mode) shall be entered in register by the auth rep of contractor at Service Centre. If the user gives a feedback that the complaint has been attended unsatisfactorily, it will be considered as unattended. No payment on this ground shall be made to contractor. (ix) In subject work the contractor has to deploy adequate number of (a) Sweepers (b) Carpenters (c) Plumbers (d) Masons from 9 AM to 5 PM excluding sundays/Holidays as mentioned for attending and rectifying day to day complaints related to all kinds of repair/replacement to be carried out in the works. The number of helpers to assist the skilled workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included in quoted rate of items of BoQ.

(x) Welder/blacksmith (Skilled) are to be deployed as and when required on complaint basis. The work includes electric welding machine, gas cutter, welding rods (ISI) including hire charges of welding machine, cost of welding rods, transportation of welding machine to site and carrying out other associated operations for attending the complaints and making system fully functional, to the entire satisfaction, complete all as specified and as directed. (xi) The contractor is also required to deploy 01 (one) site Engineer (Skilled) who will amicably supervise/ assist the entire works. The qualification shall be Degree in Civil Engineering with 03 years experience or Diploma in Civil Engineering with 05 years experience. Notes:- (1) Quoted rates shall include repair of all minor items such as cups, washers, nuts & bolts, screws and all material required except specified under relevant item of supply only (Schedule A part I) etc or any other material as directed by Engr-in-charge. (2) Materials retrieved from repair/replacement of parts or attending complaints, other than mentioned in credit schedule shall be the contractor's property and nothing shall be recovered from the contractor. Rates quoted are deemed to be inclusive of this aspect. (3) Apart from above based upon Number of complaints & quantum of work involved and during emergencies irrespective of working hours, the additional work force is required to be deployed accordingly as decided by GE/Engr-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account.

(4) The bidders are advised to pay due cognizance while quoting their rates with respect to minimum fair wages, periodical hikes in wages, repair/replacement of parts, labour charges for fixing of supply only items, extra manpower required keeping in view quantum of complaints/works and during emergencies for timely disposal and user facilitations for which no excuses shall be entertained. (5) The contractor is responsible to provide all T&P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (6) It may also be noted that the subject CA is for 06 months therefore the periodical change of workforce as per labour laws is the sole responsibility of the contractor i/c payment of minimum wages plus allowances etc and no worker shall have any lien/ claim of permanency in Govt Services during or after the contract period. (7) Any other misc works/services connected with user facilitation as per direction of GE/Engr-in-Charge.

M&L for cleaning of existing sewage line of dia 150mm to 300mm from first manhole to final drop outlet into the septic tank or main trunk line by mechanical process (by super sucker machine) or jetting machine by injecting water pressure with cutting tools compressor etc. all as specified and directed including removal of sludge / mud / silt (liquid or dry) in foul position out side of MOD land including takingout manhole covers, sludge cleaning from manholes and refixing the same in position and making good to disturbed portion if any, complete all as specified and as directed.

M&L for cleaning of exsting of sewage manholes of any size any depth bailing out of sludge/mud or silt solid or semi solid materials deposited in manholes with mechanical means / appliances and removal of the same out of MoD land and burrying the entire solid/semi solid material under ground including excavation of suitable pit complete all as specified and as directed.

M&L for cleaning of sewage line with super sucker machine with 3000 ltr sludge slurry capacity, with and including sucking in, pumping out of MoD land and carrying staff and appliances which are essential for entire removal process, complete all as specified and as directed. Note :- Arrangement of water required for Super Sucker Machine operation will be included in unit Rate.

S&F in repairs factory made SFRC manhole covers 75mm thick, M-30 grade, medium duty complete all as specified and as directed.

S &F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110mm bore including taking down of old PVC / GI / CI complete all as specified and as directed.

All as per item No. 06.00 above but 75mm bore of pipe -ditto-

S&F in repairs PVC bend/tee suitable for 110mm bore pipe complete all as specified and as directed.

All as per item No. 08.00 above but 75mm bore -ditto-.

S&F in repair 18/19mm thick medium density fiber board,interior grade,prelaminated one side for cupboard shutter/partition with knob and handle each shutter decorative choice lamination & other side balancing white lamination,fixed with screw to timber frame work complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in CM 1:4 complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in CM 1:4 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 350X250X7mm/ 450X350X7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick plastering in CM 1:4 complete all as specified and as directed.

M&L for Vitrified ceramic (Light Shade) tiles 8-9 mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed with CM (1:4) for laying floor tiles complete all as specified and as directed.

M&L for 25mm thick Cement concrete (1:2:4) type B0 (using 12.5mm graded aggregate) as in sub-base of floor finishes complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors approns etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab incl rubbing and polishing to mirror finish complete complete all as specified and as directed.

M&L for machine cut Granite slab flooring 18-20 mm thick over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of the slab incl rubbing and polishing complete all as specified and as directed.

Demolition of RCC of any description and in any position including disposal of old materials to a distance exceeding 500 M but not exceeding 1.0 KM, complete all as specified and as directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and as directed.

Supply and fixing mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking, bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and as directed.

Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and as directed.

Dismantling water tanks upto 500 litres capacity complete all as specified and as directed.

Dismantling water tanks Exc 500 & n.exc 1000 litres capacity complete all as specified and as directed.

S&F 500 ltrs capacity Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top, three layers) hoisted and fixed in position complete all as specified and as directed.

S&F 1000 ltrs capacity Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top, three layers) hoisted and fixed in position complete all as specified and as directed.

S & F 20mm dia GI nipple suitable for water tank complete all as specified and as directed.

S & F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Taking up/down 15mm bore old tubing on walls and connection of size 15mm bore complete all as specified and as directed complete all as specified and as directed.

Taking up/down 20mm bore old tubing on walls and connection of size 20mm bore complete all as specified and as directed.

Supplying and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including suitable CPVC clamp & connecting with inlet & outlet pipe with required size of brass threaded fitting/reducer/ connector complete all as specified. complete all as specified and directed.

Supplying and laying 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including suitable CPVC clamp & connecting with inlet & outlet pipe with required size of brass threaded fitting/reducer/ connector complete all as specified. complete all as specified and directed.

M&L for 15mm bore GI Tubing medium grade with all fitting fixed to wall/ Ceiling or laid on floor complete all as specified and as directed.

M&L for 20mm bore GI Tubing medium grade with all fitting fixed to wall/ Ceiling or laid on floor complete all as specified and as directed.

S & F in repair brass spindle for bib tap, pillar tap, stop cock,angle valve of any description etc complete all as specified and as directed.

S & F in repair concealed brass spindle/phase for cocealed stop cock for shower of any description etc complete all as specified and as directed.

S & F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair 15mm bore Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15 mm dia concealed stop valve cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair 15mm dia Pillar taps (Swan neck type) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and as directed.

S&F in repairs Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F brass CP tubular towel rail 600mm long 20 mm dia complete all as specified and as directed.

Supply & Fix in repair brass PRV ( Pressure Reserve Valve) of dia 25 mm in shafts for supply from OHT. complete all as specified and as directed.

S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair grating doom 75mm dia with hole/without hole of CP complete all as specified and as directed.

S&F in repair grating doom 100mm with hole/without hole dia of CP complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm suitable for 'Hot' & 'Cold' water supply complete all as specified and as directed.

S&F in repairs 32 mm PVC waste pipe 900 mm long with complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and making good to disturbed portion if any, complete all as specified and as directed.

S & F in repair sheet glass shelf/corner glass self assembly consisting of 5.5mm thick sheet glass shelf 12 CM wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs health faucet 15mm dia and including 1.25 meter long CP flexible tube and wall hook complete all as specified and as directed.

S&F in repairs shower rose, chromium plated brass, fancy type, 125 mm with or without swivel joint, any size, including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair seat cover for pedestal pan, plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repair CP jet spray with brass braided hose 1.25 mtr complete all as specified and as directed.

S & F in repair CP toilet paper holder complete all as specified and as directed.

S&F in repairs Brass CP basin mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap/basin mixer,complete all as specified and as directed.

S&F in repairs CP wall mixer 3-in-1 system with provision for both telephone shower & overhead shower complete with 115mm long bend pipe, complete all as specified and as directed.

S&F in repair EWC vitrous china wash down water closet pan (excluding flushing cistern but including flush pipe and PVC seat cover) white complete all as specified and as directed.

S&F in repair wash down water closet Orissa pattern size 580 x 440 mm white with integral foot rest and trap, including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket of wepan complete all as specified and as directed.

S&F PVC (SWR) 'P' trap of 110 mm bore complete all as specified and as directed.

S & F in repair PVC valve less, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe complete all as specified and as directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm (including tap, waste chain and plug and porcelain stopper and brackets complete all as specified and as directed.

S&F in repair plate rack made of stainless steel sheet minimum 1mm thick size 30 inch x32 inch fixed to wall making good to disturbed portion if any, complete all as specified and as directed.

Uprooting and removing of wild growth & trees from wall/roof/chajjas/CI pipes etc any location on buildings including removal of roots, sub roots upto 15cm girth etc, making good with PCC 1:2:4 or concrete in CM 1:3 as directed and finishes the surface matching with adjoining areas of wall/roof etc upto full height of bldgs (i.e. upto 9th storey bldg), including spaying Herbicide/ Weed killer as per manufacturer's instruction complete all as specified and as directed.

Demolition brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortor 1:6 complete all as specified and as directed.

M&L for Brick work with old size sub class B brick straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 etc complete all as specified and as directed.

Taking down cement plaster of any description including hacking for key complete all as specified and as directed.

M&L for rendering 15 mm thick with ready mix mortar in patches on fair face of brick work/ concrete surfaces of wall and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick with ready mix mortar in patches on fair face of ceiling and finished even and smooth without using extra cement on brick or concrete surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint including one coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces on ceiling and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed.

M&L for complete removal of existing treatment of wall using wire brush/mechanical/ electrical driven sanders, washing, rubbing down and stopping of painted surface including preparation of surface etc and applying two coats of cement base paint complete all as specified and as directed.

M&L for complete removal of existing treatment of wall using wire brush/mechanical/ electrical driven sanders, washing, rubbing down and stopping of painted surface including preparation of surface etc and M&L for applying two coats of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing treatment of Ceiling using wire brush/mechanical/ electrical driven sanders, washing, rubbing down and stopping of painted surface including preparation of surface etc and M & L for applying two coats of oil bound distemper complete all as specified and as directed.

M&L for 75 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floor including demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight complete all as specified and as directed.

Taking down Chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames Not exceeding 1.5 Sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Shutters of any description not exceeding 1 Sqm each complete all as specified and as directed.

Taking down Shutters of any description but exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Resecuring of Chowkhats or frames not exceeding 1.5 Sqm each with out taking down complete all as specified and as directed.

Resecuring of Chowkhats or frames exceeding 1.5 Sqm not exceeding 4 sqm each with out taking down complete all as specified and as directed.

Resecuring easing and adjusting of shutter exceeding 1 Sqm not exceeding 2 Sqm each with out taking down complete all as specified and as directed.

Resecuring easing and adjusting of shutter not exceeding 1 Sqm. with out taking down complete all as specified and as directed.

M&L for pressed steel frames size of frame 165x60mm for doors with one and more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and as directed.

M&L for 2nd class hardwood 35mm thick Plain, framed, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M & L for galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M&L 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors complete all as specified and as directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels decorative type on both sides complete all as specified and as directed.

S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.

S & F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and as directed.

S & F Aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloycomplete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolt of extruded section, 150mm long (ISI marked), complete all as specified and as directed.

S&F floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and as directed.

M&L applying two coat of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exceeding 10 cm width/girth including preparation of surfaces including filling with filler where reqd complete all as specified and as directed.

M&L applying one coat of synthetic enamel painting to old surfaces wooden based exc. 10 cm width/girth including preparation of surfaces complete all as specified and as directed.

S&F in repair Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F in repair extruded aluminium alloy handles 150mm long , fabricated type, anodised complete all as specified and as directed.

S & F in repair Aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy complete all as specified and as directed.

S&F in repair Aluminium anodised, barrel tower bolt of extruded section, 150mm long (ISI marked), complete all as specified and as directed.

M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds. complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3mm th pin head type (figured glass)and glazing with oil putty and wooden beads, in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply & fixing in repair stainless steel wire cloth with stainless steel 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wire staples (for any type of windows and gauzed doors) complete all as specified and as directed.

S & F in repair stainless steel pipe of 25 mm dia for curtain rod including bracket & funnel complete all as specified and as directed. Note: Only Stainless steel pipe will measured for payment purpose & repair the portion if damaged during fixing to match the existing finishes.

S & F Steel windows with side hung shutters including box type hinges with steel handle 100mm long made of Z section, and steel peg stay and necessary holdfasts, each shutter to be provided with 02 Nos of MS tower bolts 100 mm complete with glazing bars, dovetailed or welded and making good to the opening of the window complete all as specified and as directed.

All as per Ser No. 113 above, but without glazing bars and stay complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm girth or width complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube supplying and fixing in opening as per specification & drawing. it shall be wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F Factory Made Solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specifications and drawing. it shall be laminated with wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading. complete all as specified and as directed.

S&F 100mm long aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and as directed.

S&F 125mm long aluminum anodised handle complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolt of extruded section, 150mm long (ISI marked), complete all as specified and as directed.

S&F for mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded aggregate) and making good to disturbed portion if any to match the existing finishes, complete all as specified and as directed.

S&F in repair size 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

M&L for 100mm bore GI Tubing medium grade with all fitting required, fixed to wall/ Ceiling or laid on floor complete including making connection to existing RCC OHT on bldg, provision to connect with all existing distribution pipes (any size & any description) of all individual Qtrs, cutting, welding, all GI fittings required and also including taking up/down 100mm bore old GI tubing complete all as specified and as directed.

L G BUILDERS (BID ID -3347321)

imran construction company (BID ID -3347028)

Shivom Projects Private limited (BID ID -3355690)