REPAIR AND MAINT TO DOOR/WINDOWS, CUPBOARD/ KITCHEN CABINET WORK, JOINERY/ GLAZING WORK, FLOORING AND CEMENT WORKS, ROOF TREATMENT, ROOF SHEET, STEEL WORK, PLASTERING WORK ETC IN AATS UNDER AGE B/R-I OF GE (EAST) AGRA

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as specified and directed.

M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware ect complete all as specified and directed.

M&L for factory made Pressed steel frames 105 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed.

S&F for Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed.

S&F for 1.00mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.

S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified & directed.

S & F 35 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edges of framing plain, charmfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube , supplying & fixing in opening as per specification and drawing complete all as specified & directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Mild steel butt hinge medium weight cold rolled of size 100 mm long and fixed with screw/ welding complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 and fixed with screw/ welding complete all as specified and directed.

S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed.

M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed.

Welding in repairs n.exc 2.5 cm in length and n. exc 6mm thick complete all as specified & directed.

Welding in repair exc 2.5 cm but n.exc 5.0 cm length and n exc 6mm thick complete all as specified & directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing position complete all as specified and directed.

S&F powder coated anodized aluminium door & frame for door, windows and ventilator with one or more rebates incl joining cleat for fixing etc of weighing 0.55 kg/m complete all as specified and directed.

S&F of power coated any colour anodised aluminium door shutter, aluminium section weighting 0.55 kg/m incl necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters,side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters,fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and directed.

S&F in repair Double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick Al alloy sheet foundation box main of brass with stainless steel cover, governing pivot made of brass other parts are made of MS heavy duty etc complete all as specified and directed.

M&L for fixing in repair mortice lock of size 100mm and of 4 levers complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Ditto all as per Item No 32.00 above but exceeding 0.5 Sqm in each pane complete all as specified and directed.

Description all as per item No 32.00 here-in-before but 5.00 mm thick figured glass,pin head type complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S & F factory made steel windows with side hung shutters using steel section with glazing bars including box type hinge, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S & F factory made steel windows with side hung shutters with using 'Z' steel section without glazing bars including box type hinges, 01 'Z' section handle, 02 Nos 100mm MS tower bolt, one steel peg stay etc in each leaf dovetailed or welded complete all as specified and directed.

S&F for 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

S&F inrepairs 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

Supply & fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F inrepair of mild steel 300mm ordinary rat tailrod pattern springs incl roller and roller plate complete all as specified and directed.

S & F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay etc dovetailed or welded, size and thickness of members confirming to IS 1038 complete all as specified and directed.

S&F for 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F in repair Door closer( Dia cast body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L 2nd class hard wood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Supply & fix of 30mm thick flush shutter solid core construction with block board and plywood face panels commercial type on both side complete all as specified and directed.

S & F 30mm thick Second class hard wood factory made glazed and skeleton windows,ventilators etc are provided with stiles and rails shutters open rebated and prepared to receive glass, gauze etc (with out sash bars ) edges of framing plain, chamfered or rounded.fitted with cut and mitred beads for securing glass etc complete sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (b) complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square, rectangular in section, sectional area exe 13 sqcm & n. exe 25 sqcm clean sawn, secured with nails or brads complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic/Granite (floor,dado) including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including 20 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material & labour glazed ceramic coloured tiles of size 450x300x8-10mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick cement screed bed of CM (1:4) complete all as specified and directed.

Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified and directed.

Taking down of plaster from wall/ celing and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces complete all as specified and directed.

Material & labour for preparation of new surfaces of wall and applying two coats of oil bound distemper over and including one coat of JK/Birla wall care putty to match the existing as required, complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar incl all quoins, arches, pillars etc, complete all as specified & directed.

M&L for brick work with sub class ‘B’ brick, straight curved on plan exc 6m mean radius built in cm (1:4) using old size bricks complete all as specified and directed.

S&F of Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply & fix hasp and staple of size 75 mm long, safety type of aluminum anodized complete all as specified & directed.

Material & Labour for external 2nd class hardwood lipping 6 mm thick & 10 to 20 mm wide fixed with nails on block boards etc as in cupboard shelve kitchen cupboard etc complete all as specified and directed.

S&F in repair medium density fibre board of thickness 12 mm ,exterior grade, fixed to timber framework with screws as in cupboard shelves, kitchen, cupboards etc complete all as specified and directed.

S&F in repair pre-laminated particle board 19mm thick, interior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves complete all as specified and directed.

S&F in repair Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws.Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed.

S&F inrepair soft close cabinet hinges for kitchen cabinets/cupboards complete all as specified and directed.

S&F inrepair cupboard drawer channel set of 18 inches complete all as specified and directed.

S&F inrepairs of drawer handle, projected drop of mild steel 50mm to 65mm long on screw plate complete all as specified and directed.

Supply & fixing inrepair 40mm dia Cup Board knobs fixed with nut, screws Each and washers of mild steel, brass polished complete all as specified and directed.

S & F inrepair Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open ) 40 mm complete all as specified and directed.

S&F inrepairs Magnetic Catcher as in ‘Kitchen Cabinets’ Cupboards, Bath Cabinets etc complete all as specified and directed.

S&F in repairs mild steel PVC coated metalic fancy type of approved finishcurtain rod incl brackets and fancy type knobs, rings etc complete all as specified and directed.

S&F inrepairs of 19mm dia SS waredrobe hanger rod set for hanging cloths in wardrobe/ CB with supports at ends incl all fittings complete all as specified and directed.

S&F inrepairs of 6 mm dia stainless steel of medium grade tie hanger set of 4 nos for wardrobe fixing in wardrobe incl fittings complete all as specified and directed.

M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the internal/external wall and wooden Cup board,shelves,etc.wooden area should drill by 6 mm bit,Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit,gap between two holes is 45 cm to 60 cm.filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces.The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains. (i) Byfinthrin 20 % EC(Smell Chemical) (ii)CHLORPYRIPHOS 20 % EC (Smell Chemical) (iii) Imidacloprid 30.5 % SC (Odor less Chemical) The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years.

M& L for door seal with stainless steel strip complete all as specified and directed.

Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from MoD land etc complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.

M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) in padding, roof kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and directed.

M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing treatment APP modified polymeric water proofing membrane of weight not less than 3 kg/sqm with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane . (e)Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) .

Dismantling of asbestos cement (corrugated and semi corrugated etc) sheet in roof covering complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wooden wall panelling incl. frame and make good the surface etc complete all as specified and directed.

S&F solid PVC Wall Lining for wall panelling consisting of 5 mm thick wood grain printed colour PVC sheet inclusive fixing with all accessories at site as per specifications and drawing complete all as specified and directed.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixinf on to wall to make PVC frame complete all as specified and directed.

Supply and spraying multi insect, antitermite borer insect repellant into cupboards, shelves, kitchen cabinet drawers, doors, windows etc complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper complete all as specified and directed.

M/s S. K. Construction Co. (BID ID -3095688)

HARI BUILDERS (BID ID -3077927)

SHRI RADHAYSHYAM JHA (BID ID -3079499)

VARDMAN ENTERPRISES (BID ID -3066935)

Balaji Associates (BID ID -3064391)

Attar Singh and Sons (BID ID -3068609)

3Krishna Enterprises (BID ID -3066980)

M/s Laxmi Associate (BID ID -3067751)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3064760)

Gupta Automobiles (BID ID -3079821)

VASUNDHARA AND COMPANY (BID ID -3067717)