Repair to 90 HP Motor along with allied works installed at LIS Padoh

Repair to 90HP three phase induction motor of Unit no. I at LIS Padoh by way of decoupling the damaged motor from pump after disconnecting all the electrical connections. Dismantling of the motor at site by way of unscrewing of nuts/bolts and then extraction of rotor from the stator, extracting out old damaged/burnt copper winding from the stator, cleaning the slots of stator with appropriate chemical cleanser. Complete rewinding of the stator with providing/winding and fitting of new copper wires of requisite gauge and specifications as per sample at site. Providing and fitting of new F class insulation, packing material. Varnishing the stator winding with superior quality varnish and drying the stator winding completely. P/F of bearing to Driving and Non-Drive Ends of the motor as per sample. Reassembling the motor with the help of nuts/bolts/screws after inserting rotor inside the stator of the motor and checking the continuity of each phase. Refitting/installation of 90 HP motor of Unit no. I on the base frame and coupling it with pump and making all the electrical connections. Testing of the motor on no load and then on full load for its smooth operation. Providing of gland packing (Size 10mm)-2 kg and grease-2kg for smooth operation of pumping units installed. Complete job involves cost of material, skilled and unskilled labour charges, transportation charges, headload charges, hire charges of tools and tackles required for the job inclusive of all taxes as applicable and rebate on old parts. Complete Job.