Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-AOC 14 NANDALAL BOSE LANE KOLKATA 700003 | KOLKATA | KOLKATA | WEST BENGAL | 700003 | ₹3.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.1 LRejected-Finance 35 DEY STREET P O SERAMPORE DIST HOOGHLY PIN 712201 | SERAMPORE | HOOGHLY | WEST BENGAL | 712201 | ₹3.1 L | L2 | Rejected-Finance Higher than L1 |
| 3 | L3₹3.1 LRejected-Finance DASPURA MONIRAMPUR BARRACKPORE KOLKATA 700120 | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | ₹3.1 L | L3 | Rejected-Finance Higher than L1 |
| 4 | L4₹3.1 LRejected-Finance 22 2A NAKULESWAR BHATTACHARJEE LANE KOLKATA 700 026 | KOLKATA | KOLKATA | WEST BENGAL | 700026 | ₹3.1 L | L4 | Rejected-Finance Higher than L1 |
| Sl No | Description | Qty | Unit | M.S.C ENTERPRISE L3 | M/S A K BANERJEE L2 | S.R. CONCERN L1 | GHOSH AND GHOSH L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Charges for dismentaling the foundation of existing damaged voltage stabiliser after disconnection of power supply as per direction of EIC | 1 | No | 1,370 ₹1,370 | 1,360 ₹1,360 | 1,350 ₹1,350 | 1,380 ₹1,380 |
| 2.00Supply and delivery at site of 20 KVA 3 phase, Oil cooled type servo motor operated copper wound line voltage corrector conforming to IS-9815 (Pt-)- 1994 suitable for unbalanced input voltage with following specification including first filling of oil as per IS-335 where applicable. [Make: Approved make of P.H.E. Dte.] | |||||||
| 2.01a) Input voltage:- 3 phase main supply may or may not be balanced with respect phase to phase 200V-500V phase to neutral 115V-289V b) Output voltage: 3 phase balanced output voltage. Phase to Phase 400V 0r 415V ± 1% Phase to Neutral 230V or 240V ± 1% [provision should be made to adjust the variation of output voltage per phase by a variable pot well within ± 5% of output] c) Line Regulation: Output voltage should remain well within ± 1% of set voltage [from min to max i.e. either 400V or 415V supply variation] d) Load Regulation: Output voltage should remain neutral well ± 1% of set voltage be (from no load to full load] i.e. either 400V or 415V supply variation) e) Correction speed: Better than 35 Volts second f) Efficiency: Better than 95% on full load g) Cut off limit for [minimum & maximum] by limit switch with audio & visual. h) Metering indication: By selector switch provision should be made available to measure input mains supply and output voltage other stabilizer for load current measurement an ammeter with selector switch should be available. | |||||||
| 2.02 | i) Lamp indication: For input and output should be provided [ 3 lamp per side]
j) MCCB protection: For input side.
k) Load protection: HRC fuse on each output phase should be available.
l) Output over shoot: Beyond 210V to 255 volt/phase in case of "MANUAL MODE" and voltage protection "AUTO MODE" operation.
m) VISUAL indication for under voltage over voltage of output.
n) Manual mode: Up & Down correction with O/P voltage over shoot protection beyond 210V-255Volts per phase
o) Nature of cooling: Oil cooled system
p) Electric current over load protection
q) Circuit for delay outputr) Input high voltage cut off above 470 volt
s) Mode of Operation: AUTO/ MANUAL with a provision to restore the normal working of the unit " STANDBY OPERATION" should be available in case of any Electronic failure in auto mode
t) Auto Mode: Normal / Standby. (Manufacturing test certificate should be provided at the time of delivery). | 1 | Set | 1,92,440 ₹1.9 L | 1,92,430 ₹1.9 L | 1,92,420 ₹1.9 L | 1,92,450 ₹1.9 L |
| 3.00Supply and delivery of following materials: | |||||||
| 3.01 | 100 Amps 4 pole on load change over switch [Make: Approved make of P.H.E. Dte.] | 1 | No | 12,020 ₹12,020 | 12,010 ₹12,010 | 12,000 ₹12,000 | 12,030 ₹12,030 |
| 3.02 | 100 Amps Rewirable type TPN main switch [Make: Approved make of P.H.E. Dte.] | 1 | No | 11,220 ₹11,220 | 11,210 ₹11,210 | 11,200 ₹11,200 | 11,230 ₹11,230 |
| 3.03 | 100 Amps 4 way Copper busbar chamber box by 16 SWG Sheet steel enclosure including poecelain chair etc. with painting complete as per direction of the EIC [Make: Approved make of P.H.E. Dte.] | 1 | No | 13,420 ₹13,420 | 13,410 ₹13,410 | 13,400 ₹13,400 | 13,430 ₹13,430 |
| 3.04 | 35 sq. mm. 3.5 core 1.1 KV grade XLPE insulated Al. Ar. Cable as per IS:7098 (Part-II) 1988 with latest amendments [Make: Approved make of P.H.E. Dte.] | 20 | Mtr | 530 ₹10,600 | 525 ₹10,500 | 521 ₹10,420 | 535 ₹10,700 |
| 4.00 | Making brick built foundation with supplying of all required materials suitable for the above voltage stabilizer by (4:1) cement mortar including down foundation bolts (if required) and plaster with neat cement finish as per direction of EIC. | 1 | Item | 1,820 ₹1,820 | 1,810 ₹1,810 | 1,800 ₹1,800 | 1,830 ₹1,830 |
Tender Value
Refer Docs
EMD Value
₹6,500
Closing Date
10 Jun 2025, 2:00 pmClosed
Executive Engineer SMD PHE Dte
Chetla
Supply, delivery and installation of 20 KVA servo motor operated Copper wound line voltage stabilizer at PH- 1 Zone-II of Sonakhali Water Supply Scheme under Basanti Block under SMD, PHE Dte.
2025_PHED_847608_9
WBPHE/EE/SMD/NIeT-06 of 2025-26
Open Tender
Electrical Work/ Equipment
45 days
Sonakhali
Please refer Tender documents.
4 documents required · 4 mandatory
₹6,500
22 Apr 2026
22 May 2025
12 Jun 2025
22 May 2025
10 Jun 2025
22 May 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tendernotice_2.pdf
PDF • 0.45 MB
BOQ_1901467.xls
BOQ • 0.28 MB
7_TechSpecVS.pdf
Tender Documents • 0.04 MB
Download all tender documents and submit your bid