Improvement of Sisupani FIS under SOPD-G for the year 2025-26

Carrying out levelling survey taking long section and cross section at 30 M interval of proposed canal system, afflux bund, approach road and along the stream including chaining, pegging, holding staff, carrying out instrument, clearing jungle etc, complete as directed.

Carrying out block contour survey of the commanded area covering stream, dong, channel, road etc. and the whole area considering square block system and spot system and spot levels are to be within 30 M x 30 M for preparation of contour including clearing light jungles, chaining, pegging holding staff, umbrella and compass lining etc. where required, complete as directed.

Construction of R.C.C BM Pillar of size 0.15 M X 0.10 M in proportion 1:2:4 with required reinforcement including E/W in excavation, brick soling, centering, shuttering and propping, etc, complete as directed.

Supplying of wooden pegs of size 0.60 M x 0.045 M x 0.045 M made of 2nd class local wood.

Earthwork in filling in Marginal bund / Guide bank / Afflux bund / Canal embankment etc. to the design section and grade by obtaining earth from outside borrow pits and filling in uniform layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps from the seat of embankment and borrow pit area, breaking clods not more than 10 mm cube, ramming, watering, dressing and roughening the seat of embankment, profiling etc. Paying compensation of earth borrowed from private or forest land if any, lead upto 30 M and lift upto 1.5 M, complete as directed.

Supply of Geo-textile bags of type-A (1.03 × 0.70M) inner to inner made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653 : 2017 Each ₹ 159.73 (i) Wide Tensile strength(MD) ≥20KN/m & Wide Tensile strength(CD) ≥20 KN/m (ii) Elongation (MD) ≥50% & Elongation (CD) ≥50% (iii) Abrasion ≥95% (iv)Trapezoidal Tear Strength (MD) ≥450N & Trapezoidal Tear Strength (CD) ≥450N (v)CBR Puncture strength≥4000N (vi)Permittivity≥1.10s-1 vii)Permeability≥40l/m2/sec (viii)AOS ≤75micron (ix) UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥ 80% (x)Mass≥400 gm/m². (xi) Thickness at 2 KPa≥3 mm (xii) Seam strength ≥80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100mm.(Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)

Carriage of Geo Bags of size 1.03 x 0.70 m including loading & unloading, Stacking, etc. complete and including hire charge of truck with driver and handyman cost of POL etc. completed as directed. ( 285 Km From Guwahati to Site )

Supply of Geo Bags Type-B (Size 2.00m × 1.50m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653 : 2017 for Nonwoven and IS 16654 : 2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geotextile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids.Properties (i) Tensile strength (MD) ≥80 KN/m & Tensile strength (CD) ≥70 KN/m (ii) Elongation (MD) ≤25% & Elongation (CD) ≤25% (iii) Abrasion ≥75%, (iv) Trapezoidal Tear Strength (MD) ≥1500N & Trapezoidal Tear Strength (CD) ≥1300N (v) CBR Puncture strength ≥900N (vi) Permeability ≥18 l/m2/sec (vii) AOS ≤250 micron (viii) UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥80% (ix) Mass ≥300 gm/m² (x) Seam strength ≥50 % of actual fabric strength.Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties (i) Wide Tensile strength (MD) ≥15 Wide Tensile strength (CD) ≥15 KN/m (ii) Elongation (MD) ≥50% & Elongation (CD) ≥50% (iii) Abrasion ≥95% (iv) Trapezoidal Tear Strength (MD) ≥340 N & Trapezoidal Tear Strength (CD) ≥340 N (v) CBR Puncture strength ≥3000 N (vi) Permittivity ≥1.25 s-1 (vii) Permeability ≥60 l/m2/sec (viii) AOS ≤75 micron (ix) UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥80% (x) Mass ≥300 gm/m² (xi) Thickness at 2 KPa ≥3 mm (xii) Seam strength ≥80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with