Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-AOC HOUSE NO 3363 SECTOR 27 D CHANDIGARH | NA | NA | 160001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹54.2 L+₹4.8 L (9.81%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹54.9 L+₹5.5 L (11.2%)Rejected-Finance 1106 SECTOR 29B CHANDIGARH 160002 | CHANDIGARH | CHANDIGARH | 160002 | L3 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
13 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
REPAIR AND MAINT OF CERTAIN MISC B/R WORKS AT PCDA BUILDING SECTOR-09 AND DAD RESIDENTIAL COLONY SECTOR-35B UNDER GE CHANDIGARH
2023_MES_622770_1
GE/CHD-58/2023-24
Open Tender
Civil Works
Item Rate
270 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹96,000
Yes
7 Feb 2024
11 Oct 2023
15 Nov 2023
11 Oct 2023
13 Nov 2023
1 Nov 2023
12 Oct 2023 - 18 Oct 2023
Amount
Demolition reinforced cement concrete as in roof (other than ground floors) beams, staircases, landings, parapets and chajjas and similar suspended works including cutting out rusted and spoiled reinforced bars including removing of debris to dumping debris as marked by local authorities complete all as specified and directed. Note for item no. 1 to 31: The work to be executed in the building of height 27 mtrs
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200 mm thick (Horizontal or sloping) in flat rough finished concrete surfaces.
M&L formwork to sides of soffits of floor or roof beams, beam haundhings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc, also splays between floors and beams etc all as specified and directed.
M&L formwork to chullah hoods, chajjas troughs and similar items including edges complete all as specified and directed.
M&L formwork to sides of pillars, posts, struts, piers, circular columns and stanchions all as specified and directed.
M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but not exc 20 cm wide all as specified and directed.
M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips all as specified and directed.
All as per item No 07 above TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders all as specified and directed.
M&L for welding exc 2.5 cm and n.exc 5 cm in length, thickness of metal to be welded exc 9 mm but n.exc 20 mm thick for connecting new and old reinforcement in any position complete all as specified and directed.
M&L running welding in repairs exceeding 9 mm but n.exc 20 mm thickness of metal to be welded all as specified and directed.
M&L for reinforced cement concrete (Design mix) M-25 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
M&L RCC M-25 (Design Mix) as in chajjas, fins, facia etc at different floor level of building PCDA upto 5th floor with utmost care of manpower etc all as specified and directed.
M&L for 10 mm thick cement plaster in CM (1:3) on RCC surface finished even and smooth with water proofing compound, without using extra cement complete all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels over 1.5 m span and the like all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregate) as in parapets and railings exc 60 cm in height, newels, balustrade and the like all as specified and directed.
M&L preparation of existing surfaces like chippings of unsound weak/loose concrete/cover of reinforcement etc all as specified and directed
M & L for cleaning of existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose materials, diet etc, complete and applying two coats of alkaline rust converting primer with a coverage of 350 gms/sqm on the existing rebar and allowing it to react with rust for 6 hours and forming corroson resistant, insoluble and adherant protective layer, including cleaning the reinforcement with wire brushing to remove rust spalls, with time interval of 1 hour between the coats. Product : Sika RustOff - 100 or equivalent as approved by GE, complete all as specified and directed.
M & L providing and application of zinc rich epoxy antocorrosive protective coating for rebar corrosion protection system in 2 coats of 0.40 kgs/sqm. The product should confirm carbonation resistance of 2 mm and bond strength < 1N/sqmm according to ASTM C 882-78. (Measurement will be surface area of concrete). Product : Sika Friazinc R@ or equivalent as approved by GE, complete all as specified and directed.
M & L providing and fixing additional corrosion resistant hot dip galvanised steel rebar Fe-500 or height grade as per required diameter in various structural elements such as columns, beams and slabs etc, to replace the lost rebar section due to corrosion including cutting, bending and fixing the bar by installing new rebar with ETA Approved Epoxy based anchoring adhesive Sika AnchorFix 3030 or equivalent as approved by GE complete all as specified and directed for drilling and rebaring of 10 mm dia x 160 mm deep.
All as per item no 20 above but drilling and rebaring of 12 mm dia x 160 mm deep.
All as per item no 20 above but drilling and rebaring of 16 mm dia x 160 mm deep.
All as per item no 20 above but drilling and rebaring of 20 mm dia x 160 mm deep.
M & L for providing and application of corrosion inhibiting impregnation coating designed for use as an impregnation for protection of steel reinforcement within unexposed concrete in consumption of 0.5 kg/sqm complete all as specified and directed. The product should be arnino alcohol and inorganic combination based migratory corrosion inhibitor for both cathodic and anodic protection. Product : Sika Ferrogard 903 or equivalent as approved by GE.
M & L for drilling holes of 12 mm dia upto 50 mm deep holes in structural members at the interval of 500 mm in staggered manner or along the crack line in Reinforced concrete (RC) structural element including cleaning of the holes by air blower and inserting 12 mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying SikaDur 31 or equivalent thixtropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, levelling and finishing the external surface, after completion of the work, etc, complete all as specified and directed.
M & L for providing and mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer specification including preparation of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-Charge in consumption of 0.4 kgs/sqm. The product should comply with ASTM C 881 Type II Grade 2 Class B+C and bond strength should be 10 MPa complete all as specified and directed. Product : Sikadur (R)-32 LP or equivalent as approved by GE.
M&L providing and applying 15-20 mm thick layer of single component, fibre reinforced, sulphate resistant, low shrinkage, high performance cementitious structural repair mortor confirming to EN 1504-3 Class R4 on exposed concrete surface as per technical specification. Material should have Compressive Strength > 55 MPa as per EN:12190, chloride iron content < 0.05% as per EN:1015-17, Adhesive bond > 2.0 MPa as per EN: 1542, Carbonation resistance dk < control concrete (MC(0,45)) as per EN: 13295 & Elastic modulus > 20.0 GPa as per EN: 13412 (Complete finished item with all leads and lifts) complete all as specified and directed. Product : Sika MonoTop(R)-412(IN) or equivalent as approved by GE.
M&L examining concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms, grooving the edges same with grinder upto 5-10 mm depth without damaging existing rebars, carefully removing carbonated concrete around the rebars upto 10 mm depth by low impact high frequency hammer/chipper without damaging the sound concrete, daily cleaning and stacking of debris at prescribed location in polypropylene/paper bags, depositing off the debris so generated on weekly basis outside the premises, etc, complete all as specified and directed.
M&L providing and applying single component, high build, elastomeric, crack-bridging, resistance to CO2 & SO2 and Chloride ion diffusion, UV resistant, breathable acrylic coating, with elongation at break exceeding 200% Sikagard - 550 W IN applied in two coats (each coat 100 micron DFT) on acrylic based primer at an average total thickness of 200 microns DFT in two coats including acrylic resin based primer Sikagard (R) 552 IN Primer W as per the recommendation of the manufacturers complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
S&F rolled mild steel joist, channel, angle or tee sections fixed independently without connecting plates etc (cut to ordinary length i.e, within 20 mm of the length indicate) of Gde Fe-410W-(Gde-E-250) quality B all as specified and directed.
Cleaning surfaces of old concrete roof /brick tiles by picking, sweeping clean including old roof covering membrane if any description and washing down with water to remove dust etc and brushing with neat cement slurry with 3.00 kgs of cement per sqm complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed
M&L 50 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in Padding/flooring, surfaces finished even and fair complete all as specified and directed.
M&L for providing Screed bed or bedding layer of mortar 15 mm thick (using water proofing compound) in CM 1:4 complete all as directed. (Note : Water proofing compound shall be measured and paid for seperately)
Supply only Integral water proofing compound of approved make complete all as specified and directed
M&L for 15 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately.
M&L PCC 1:7:12 in sunken floor's filling in mass concrete type F2 , using 40mm graded aggregate complete all as specified and directed.
M&L 25 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.
Material and labour for 3 mm thick APP modified polyester reinforced water proofing membrane with minimum weight of 3.60 Kgs/Sqm, as specified. The APP membrane shall be laid using torch-on application hot bitumen straight run VG grade 30/40 @ 0.70 Kgs/Sqm with minimum 10 cm side overlap and 15 cm end overlap over and applying bituminous primer @ 0.50 Kgs per sqm over cleaned and dry roof surfaces including parapet the APP membrane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortor 1:4 provide requisite slope towards rain water pipe outlet complete all as specified and directed by Engr-in-Charge.
M & L for 300 mm x 300 mm x 7 to 8 mm thick cool roof temp/temp shield tiles with solar reflectance index as in terraces, roofs, pavements in horizontal and vertical surfaces white in colour set and jointed in neat cement slurry @ 3.00 Kgs/sqm and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer 15 mm thick in cm 1:6 complete all as specified and directed.
Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles
Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.
Brick work with sub class 'B' bricks (EXCEPT BRICKS), straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed
M&L Rendering 15mm thick on brick work or stone masonry surfaces in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete all as specified and directed.
Repairing the edges of concrete chajjas, facias, slabs, columns and the like by providing PCC (1:2:4) type B0 incl all necessary form work and or provn of rendering 15mm th(average thickness) in cement mortar 1:3 , after applying a coat of cement slurry @ 3 kg/sqm of surface, finished even and fair, surface area not exc 300 mm wide in patches incl taking down swoolen/damaged plaster of concrete complete all as specified and directed. Note :- Work will be carried out upto 27 mtr.
M&L for preparation of newly plastered surface of walls and applying two coats of weather guard exterior acrylic emulsion paint complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removing of debris to dumping debris as marked by local authorities complete all as specified and directed
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) area of each tile of size 300 mm x 300 mm mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L Glazed ceramic coloured tiles 300 x 600 x 7 to 8 mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.
M& L for vitrified coloured (Dark shade) ceramic tiles 8-9 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M& L for vitrified coloured (Dark shade) ceramic tiles 8-9 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.38 sqm, as in vertical surfaces such as skirting/dado on wall surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Endura digital tiles, heavy duty for high traffic 300 mm x 300 mm x 10 mm thick, non skid, acid and scratch resistance, fixed with 3 mm spacer and filled with grout breaking strength not less than 1700 N as in floor, jointed in neat cement slurry, including 15 mm thick screed bed cement mortor in CM (1:6) and dismantling of tiles complete all as specified and as per direction of manufacturers instruction complete all as specified and directed.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Fixing only tubes, any grade, to concealed in walls and ceilings or laying in floors 15 mm, `medium grade' galvanised, with new fittings and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.
S&F galvanised iron tubing 15 mm, `medium grade' with all fitting and fixed complete to concealed in walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Fixing only tubes, any grade, to concealed in walls and ceilings or laying in floors 20 mm, `medium grade' galvanised, with new fittings and fixed complete to walls ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.
S&F galvanised iron tubing 20 mm, `medium grade' , with all fitting and fixed complete to concealed in walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified
Dismantling of walls/ceiling boards/wall panelling or insulation board of any thickness, including cover fillets complete all as specified and directed.
S&F PVC hallow wall panelling of 5 mm thick including all necessary fittings frame work etc complete all as specified and directed
M&L for providing and fixing Gypsum board panel laminated with texture vinyl coated paper tiles of size 595 mm x 595 mm x 8 mm thick as in ceiling having snap grid 600 mm x 600 mm including GI wall angle of size 24 mm x 24 mm x 0.43 mm thick alongwith perimeter of ceiling, fixed to walls/partitions with the help of nylon sleeves at 450 mm centre, suspending intermediate Tee section of size 24 mm x 38 mm x 0.35 mm thick and cross Tee section 24 mm x 25 mm x 0.3 mm thick suspended fromsoffit of ceiling at upto 900 mm centre to centre or adjustable as required at site. 4 mm dia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of weather guard exterior acrylic emulsion paint (Ist quality) (Apex) any tint over a coat of primer, at any height complete all as specified and directed.
M&L for preparation of existing treatment of wall and applying two coats of weather guard exterior acrylic emulsion paint (Ist quality) (Apex) any tint, at any height complete all as specified and directed.
M&L for preparation of exixting treatment of walls including preparation of the surfaces properly and applying two coats of oil bound distemper over a coat of primer over 1 mm wall care putty to achieve smooth surfaces, at any height complete all as specified and as directed
M&L for preparation of old painted steel and iron surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint( ist quality ) at any height complete all as specified and directed.
M&L for preparation of old painted wood surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint at any height all as specified and as directed.
S&F in repairs aluminium powder coated (Min thickness of powder coating 50 micron) frame for doors, windows, ventilators weight not less than 3 Kgs/Rm with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified and directed.
S&F in repairs aluminium powder coated (Min thickness of powder coating 50 micron) anodised aluminium door shutters, weight not less than 2.5 Kgs/Rm aluminium section including necessary joining cleats/aluminium beading, glazing clips, rubber neoprene packing, handles 2 Nos, tower bolt 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
S&F in repairs aluminium powder coated (Min thickness of powder coating 50 micron) anodised aluminium windows, and ventilator shutters, side hung type without sash bars, including (double shutter) glazing bars and without glazing bars aluminium section weighing not less than 2.00 Kgs/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100 mm long (02 Nos) suitable handle (01 No) tower bolt 02 Nos complete all as specified and directed.
S&F 5.5 mm thick sheet glass pain tinted/plain/figured glass type with 5 micron thick black film ordinary quality and rubber cleating, silicone, glazing with oil putty in each pane complete all as specified and directed.
S&F in repairs toilet papper holder chromium plated with fixing to wall complete all as specified and directed. Make : Make: Jaquar (Cat Part No. 1151N), Cera (Cat Part No. F-5014109CH), Hindware (Cat Part No.F-450027)
S&F in repairs cast copper alloy chromium plated towel rack with lower hanger (Stainless steel) with hooks complete all as specified and directed. Make : Make: Jaquar (Cat Part No.1581H), Cera (Cat Part No.F-5014131CH), Hindware (Cat Part No.F-890012)
S&F in repairs hand shower (health faucet) with one meter long easy flexible in chrome finish and with hook complete all as specified and directed. Make: Jaquar (Cat Part No.ALD-565), Cera (Cat Part No.F-8030110AB), Hindware (Cat Part No.F-160108)
S&F in repairs towel ring chromium plated complete all as specified and directed. Make: Jaquar (Cat Part No.ACN-1121BN), Cera (Cat Part No.F-5014105CH), Hindware (Cat Part No.F-880007).
S&F in repairs hand shower of size 25 mm x 38 mm oval shape single flow (ABS body and face plate) chromium plated with rubit cleaning system complete all as specified and directed. Make: Jaquar (Cat Part No.HSH-49537), Cera (Cat Part No.F-7030101AB), Hindware (Cat Part No.F-500007).
S&F in repairs 15 mm dia bore bib taps cast copper alloy chromium plated, brass ferrule, quarter turn complete all as specified and directed. Make: Jaquar (Cat Part No.FLR-5047N), Cera (Cat Part No.F-1020151), Hindware (Cat Part No.F-400002)
S&F in repairs 15 mm dia bore cast copper alloy chromium plated wall mixer with connector for hand shower arrangement with connecting legs, wall flanger and for hand shower complete all as specified and directed. Make: Jaquar (Cat Part No.FLR-5267N), Cera (Cat Part No.F-1013414), Hindware (Cat Part No.FF-400011).
S&F in repairs 15 mm dia bore cast copper alloy chromium plated single lever, single mixer swinging spout (wall mounted model) with connecting legs and wall flanges complete all as specified and directed. Make: Jaquar (Cat Part No.FLR-5163), Cera (Cat Part No.F-2006405, HT-F 3001405), Hindware (Cat Part No.F-400019)
S&F in repairs soap dish chromium plated with fixing to wall complete all as specified and directed. Make: Jaquar (Cat Part No.ACN-1131N), Cera (Cat Part No.F-5014116CH), Hindware (Cat Part No.F-890005).
S&F in repairs vitreous china wash down water closet pan including connection to drain or out going pipes single piece complete all as specified and directed. Make: Jaquar (Cat Part No.SLS-WHT-6851S300PP), Cera (Cat Part No.A-1014108),Hindware (Cat Part No.92562-S-22)
S&F in repairs vitreous china wash hand basin of size 485 mm x 370 mm x 150 mm under counter basin oval shape with coupling and grating and connection to drain pipe complete all as specified and directed. Make: Jaquar (Cat Part No.CNS-WHT--6901), Cera (Cat Part No.S-2020162), Hindware (Cat Part No.91041)
S&F in repairs single lever mini basin mixer without popup waste system with 450 mm long brided handle complete all as specified and directed. Make: Jaquar (Cat Part No.FLR-5025B), Cera (Cat Part No.F-1013101), Hindware (Cat Part No.F-440009)
S&F in repairs 15 mm dia bore stop/angle valve with high pressure, screwed both ends for iron pipes or for union complete all as specified and directed. Make: Jaquar (Cat Part No.FLR-5053N), Cera (Cat Part No.F-1013201), Hindware (Cat Part No.F-400004)
S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.
S&F in repairs 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified.
S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.
S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated fancy type (ISI marked) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F in repairs 15mm bore stop/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, (ISI marked) with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed. .
S&F in repairs 15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, (ISI marked) screwed for iron pipe. ,
S&F in repairs 15mm Stop valve, cast copper alloy (fancy type) chromium plated with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions (ISI marked),and fixed of 15mm bore complete all as specified and directed. .
S&F in repairs PVC waste pipe 32mm bore all as specified
S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms)
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F 110mm bore PVC (SWR) bends any radius.
S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.
S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
M/s Super Trading Corporation
MANDEEP ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .