Providing and fixing of Fire Fighting System and Sprinkler System at High Court Extension Building Sector 17 Chandigarh (Ch to 4059 CO (P) Administration of Justice)

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. DSR 18.6

150 mm. Dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : DSR 18.7

25mm dia DSR 18.7.1

32mm dia DSR 18.7.2

40mm dia DSR 18.7.3

50mm dia DSR 18.7.4

65mm dia DSR 18.7.5

80mm dia DSR 18.7.6

100mm dia DSR 18.7.7

150mm dia DSR 18.7.8

Supplying and fixing single headed internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank cap and chain as required : DSR 18.10

Single headed Stainless steel DSR 18.10.2

Supplying, fixing, testing and ommissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : DSR 18.11

50mm dia DSR 18.11.2

80mm dia DSR 18.11.4

100mm dia DSR 18.11.5

150mm dia DSR 18.11.6

Providing, installation, testing and commissioning of Dual plat non-return valve of following sizes with rubber gasket, GI bolts, nuts, washers etc.as required : DSR 18.14

100mm dia DSR 18.14.5

150mm dia DSR 18.14.7

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : DSR 18.16

Stainless Steel (Grade 304) DSR 18.16.2

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. DSR 18.17

30 mtr long DSR 18.17.1

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required DSR 18.18

Stainless Steel (Grade 304) DSR 18.18.2

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : DSR 18.19

4 way - 150 mm dia M.S. Pipe DSR 18.19.2

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. DSR 18.20

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : DSR 18.21

Pendent Sprinkler DSR 18.21.1

Horizontal Sidewall Sprinkler DSR 18.21.3

Providing and fixing Sprinkler flexible drops stainless steel SS 304 C/W ½ “ NPT on reducer thread, with Max. working pressure of 175 PSI , Test pressure 875 PSI ( BURST ) with branch line ( inlet ) 1” NPT female thread , 01 No reducer , 01 no nipple , 02 no side brackets, 01 no centre brackets etc. complete set , unbraided UL listed complete in all respect. NSR

Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : DSR 18.24

150mm dia DSR 18.24.3

Providing and placing on terrace (at all floor levels) polyethylene water storage tan, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support tank. DSR 18.48

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. DSR 18.10

25 mm dia nominal bore (Open pipe on terrace) DSR 18.10.3

32 mm dia nominal bore (Open pipe on terrace) DSR 18.10.4

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17

32 mm nominal bore DSR 18.17.2

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. DSR 18.18

25 mm dia. nominal bore : DSR 18.18.3

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46

25 mm nominal bore DSR 18.46.3

32 mm nominal bore DSR 18.46.4

Cutting holes up to 30x30 cm in walls including making good the same. DSR 18.76

With common burnt clay F.P.S. (non modular) bricks DSR 18.76.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. DSR 18.77

4kg, ABC FIRE EXTINGUISHER NSR

Providing and Fixing of ABC (Power type) ABC FIRE EXTINGUISHER/ 4 kg HP Mild Steel Cylinders ISI marked approved fitted with pressure indicating gauge capacity complete with discharge horn and mounting it on the wall with a suitable MS bracket (including S/F bracket) minor civil works etc. complete as required. Make: Minimax/ Ceasefire/ Newage/ Safex/ Omex/ G. Tech /Safeguard

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.) Make: Minimax/ Ceasefire/ Newage/ Safex/ Omex/ G. Tech/Safeguard

Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station. Make:H.Guru/ Fiebig/ Dwyer

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1

Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.1

12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7

1:4 (1 cement: 4 fine sand) DSR 13.7.2

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : DSR 13.62

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1

Please Enable Macros to View BoQ information