Construction of 192 Nos Flats and Community Hall for Housing And Urban Poor Under Integrated Housing and Slum Development Programme IHSDP at Sector4 Parwanoo

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed PVC conduit and suitable metal box with piano type switch and sheet earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in-Charge.(only cost of wires, switch and sheet will be paid):- Group A

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved by the Engineer-in-Charge.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required approved by the Engineer-in-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required approved by the Engineer-in-Charge.

2x1.5 Sq. mm.

2x 6.00 Sq. mm..

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.approved by the Engineer-in-Charge.

S.P. 5/ 6 Amps one way switch, piano type.

5 pin 5/ 6 Amps socket outlet, porcelain base/ piano type.

Supplying and fixing suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections painting on existing metal board (180x100x60mm) deep etc. as required and approved by the Engineer-in- charge.

Supply and Fixing Bakelite Batten/angle holder including connections etc. as required and approved by Engineer in charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required approved by the Engineer-in-Charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form approved by the Engineer-in-Charge. 300 mm deep (nominal)

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required approved by the Engineer-in-Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required approved by the Engineer-in-Charge Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required approved by the Engineer-in-Charge. 40 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel CBdistribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required approved by the Engineer-in-Charge. Single Door 8 Way

Providing and fixing LED Lamp 9 watt. Havells make in the existing fixture etc. as required and approved by the Engineer-in- charge.

Providing and fixing Kit - kat fuse unit 100 Amp. etc. as required and approved by the Engineer-in- charge.

MOHINDER KUMAR VERMA