Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC | L1 | Accepted-AOC accepted | |
| 2 | L2₹9.3 L+₹68,086.90 (7.86%)Rejected-AOC | L2 | Rejected-AOC Rejected due to L2 agency |
Tender Value
₹8.4 L
EMD Value
₹17,000
Closing Date
5 Mar 2020, 5:00 pmClosed
Executive Engineer
Executive Engineer PD1 PWD BandR Sirsa
RENOVATION OF SUB HEALTH CENTER AT VILLAGE SAHUWALA IST IN SIRSA DISTT.
2020_HRY_119807_1
RENOVATION OF SUB HEALTH CENTER AT VILLAGE SAHUWA
Open Tender
Civil Works - Buildings
Item Wise
120 days
sirsa
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Executive Engineer PD1 PWD BandR Sirsa
₹17,000
Yes
8 Jul 2020
24 Feb 2020
6 Mar 2020
24 Feb 2020
5 Mar 2020
24 Feb 2020
Amount
Civil work
Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement (HSR 8.5 b)
Cement Concrete 1:2:4 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level (HSR 10.59)
1.20 metres high fencing, with 1.65 metres posts, placed at every, 2.5 meters to 3 metres apart embedded in cement concrete blocks, and every tenth post, to be strutted, provided with 4 horizontal lines of G.I. barbed wire, weighing 9.34 kg. per 100 metres (minimum) and fixed with G.I. staples, tied to 6 mm bar nib, with binding wire or by providing cut, including drilling holes, in the post of complete (excluding the cost of posts, struts, earth work and concrete which is payable extra). (HSR No.24.36)
Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth (HSR. 10.26)
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type or railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (Ch.18.12)
Providing and laying 60mm thick interlocking paver blocks of all shapes and colours in design mix cement M-35 over a bed of 25 mm thick fine sand complete in all respect.(HSR 10.158)
Providing and fixing Steel Railing of approved make ISI Mark (NS)
Laying and Fixing required size of glazed tiles with DESIGN PRINTED for Windows & Door Borders (Satin finish) in dado set in CM 1:3 with joints so as to form a true & even surface and joints finished neatly with white cement mixed with matching pigments all complete as directed. (Rate should include base plastering with CM 1:5 of required thickness.) The rate shall include cost of customized printing at top of the tile all complete as the details given by National Health Mission Haryana / HLL directed. (Kindly refer tender documents for Design details) (as per HSR 14.92-b) Labour Rate Note :- Tiles will be supplied by the department
Two range of curtain cloth – Type 1 - II. Both for doors, windows and partions. Assorted colours plain & prints. Stitched as per site/ size requirement. Minor modifications in stitching as per site/ size requirement. Preferred colour (Brown, Cream, Beige).Curtain price (including cloth & curtain rod) to be quoted in Squre metre. Stitching for each curtain to be absorb in the price of the cloth generally 2 meters.Fast colours, water wash.Fabric density Non Transparent Composition. Fabric of curtain shall be soft texture, great shading, drape effect and nice dobby. The bracket shall be side mounted and front mounted as required. First rod mount is 3.5 inches from the wall. Where curtain used as a partition/ long length, sufficient support from ceiling should be provided to avoid sagging.Rate quoted for fully stitched Curtain with top nepha with punch holes after lining bucramreinforced with SS / PVC islets and lower nepha 200mm double turned. Type - II (Window & Door Curtain)Curtain fabric weight shall be up to 250-275 (±5%) gsm Composition of fabric shall be polyester yarn I.E. 300 denier fast colour sink age shall be (±5%) Weft and warp shall be polyester / cotton polyester mix (NS)
Providing and Fixing of Compressed form board with digital prints (NS)
Providing and Fixing of Flex print board with MS Pipe Frame (NS)
Providing and Fixing Digital Vinayal Printing Flex Sun board (NS)
Providing 3 Seater Matix Comn. Arm Chairs complete as per statisfaction of Engineer-in-charge of approved make (NS)
Providing Dusbin of (Blue, Red and Green) of three sets backets (NS)
Providing and fixing Elliptical Machine for Standing on the Pedals, Holding the armrest, moving the feet as walking on the ground with hands move accrodingly of appx weight 38 kg. (NS)
Providing and fixing Air Walker/ Riding Trainer for clenching the horizontal bar with two hands, pedaling on the pedals and leaning the upper body forward, with a slightly bend of the legs then moving the legs as walking with appx. Weight of 40 kg. (NS)
Providing and fixing for Sit up board (dual) for lying in the board, hooking the bar by your feet, hand cross behind your head, take a deep breath and than do sit up exercise with a appx. Weigth of 70 kg. (NS)
Providing and fixing Body rider for sitting on the seat, cleanching the horizontal bar furmily, Pedal the Pedals, and trying best to pull the bar horizontly with a appx. Weigth of 26 kg. (NS)
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10)
Providing two coats of exterior acrylic emulsion paint. (b) 1st quality (HSR. 16.79-b)
Surender Kumar Grover
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .