Special repair/renovation of toilets, mess blocks and other misc. jobs in five Hostels (Triveni, Gangotri, Varindavan, Ajanta and Vindhyachal Hostels) at CCS HAU, Hisar. (including public health work)

Amount

Civil work 1 to 50:- Loading unloading of building rubbish.{HSR 4.1 (a)}

Disposal/ carriage of material / building rubbish ( metalled road) with a lead of 2 K.M. excluding loading, unloading {HSR 5.2(a)}

Dismantling brick work, tile masonry or tile lining and tile terracing {HSR 8.5(b)} (b) in cement

Dismantling concrete {HSR 8.6(e)} (e) reinforced cement concrete with cleaning and straightening and cutting of bars if required.

Removing doors and windows (wooden and steel) together with the dismantling of walls :- {HSR 8.17 (b)} (b) windows

Dismantling cement conglomerate/ terrazzo floors 25mm to 50mm thick including concrete base.{HSR 8.25)

Scraping {HSR 8.32 (a) } (a) White wash and colour wash

Scraping {HSR 8.32 (c) } (a) Cement plaster

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. (HSR 10.81)

Extra over item Nos.10.79 to 10.94, if 1:1½:3 mix is used instead of 1:2:4. {HSR 10.95(a)}

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level (HSR 11.9)

11.43 cm thick brick wall laid in cement sand mortar 1:4 without reinforcement , in foundation and plinth (HSR 11.47)

Tile terracing with one layer of tiles , 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement mortar 1:3 and top surface to be left clean (HSR 13.14)

Cement concrete 1:2:4 gola 10 cm X 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified (HSDR 13.64)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Floating coat of 1.50 mm thick neat cement laid in one operation to the topping (HSR 14.3)

Kotah stone flooring, minimum 25 mm thick, in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62) (Note: The floor shall be finished with granite polish and nothing shall be paid extra).

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in flooring laid in any patterns as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (HSR 14.89) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI & RAK. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles (HSR 14.91) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI & RAK. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete {HSR 14.92 (b)} (b) size of ceramic glazed tiles 300 mm x 450 mm

Providin edge moulding to 17-20 mm thick granite stone counters, vanities etc. including machine polished to edge to give high gloss finish etc. complete as per design approved by Engineering In-Charge. (Moulding) {HSR 14.98 (i) (i) Single Moulding

12 mm thick cement plaster 1:6 on walls {HSR 15.7}

20 mm thick cement plaster 1:4 in 2 coats work {HSR 15.15}

Cement pointing 1:2 flush on flat brick flooring (HSR 15.71)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead , linseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR 16.1)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping, etc. (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

White washing three coats {HSR 16.48}

Distempering with washable oil bound distemper (of approved manufacture) two coasts excluding priming coat on new work (HSR 16.57)

Providing and applying two coats of white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc., complete (J.K/ Birla make). (HSR 16.81)

Providing and fixing hard drawn steel wire fabric 75 mm x 25 mm rectangular mesh with 3.25 mm dia wire fixed on chowkats with 25 mm thick kail wood cover moulding of full width. (HSR 17.29)

Wire guage fixed on chowkats with 25 mm thick teak wood cover moulding of full width. (HSR 17.39)

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc. (non-coniferous timber other teack conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chocks/cleats, stops nail etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position)- (styles and rails of windows shutter shall be 75 mm wide) {HSR 17.92 (ii)} (ii) 35 mm thick

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formalehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats, stops nail etc., (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position){HSR 17.93 (a) (i)} (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (i) 25 mm thick

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formalehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats, stops nail etc., (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position){HSR 17.93 (a) (iii)} (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (iii) 35 mm thick

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, all complete. (HSR 17.95) Fixed portion (Anodized Aluminium transparent or dyed to required shade according to IS;1868, minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. (HSR 17.96) Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including of cost of PVC/ neoprene gasket required including Aluminium fitting.

Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with CP brass/ stainless steel screws etc. complete. {HSR 17.97(b)} (b) Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/ neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). {HSR 17.98(b)} (b) With float glass panes of 5.00 mm thickness.

Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC incluidng straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position, complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any, separtely for different diameters as actually used in work excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 18.22)

Pressed steel sheet frames (chowkhats), consisting of 2.00 mm thick steel sheet of the specified section, including iron lugs (hold fasts, iron hinges, confirming to PWD specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red led non-setting primer of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs, complete:- (HSR 18.34(a)} (b) door and window frame of size 89 mmx 50 mm with 40 mm wide single rebate.

Providing & fixsing 75 mm long aluminium handles with necessary screws etc. for aluminum shutter under worktop, complete in all respect as directed by Engineer-in-charge. (NS)

Providing and fixing 100mm long aluminium tower bolt(10mm rod) with necessary screws etc. complete in all respect as directed by Engineer-in-charge. (NS)

Applying two coats of Dr. Fixit Pidicrete URP – SBR Latex (Pidilite make) solution made of URP + cement in the proportion of 1:1.5 (as recommended by the manufacturer) on deteriorated concrete surfaces of slab and columns/ beams, complete in all respects as directed by the Engineer-in-Charge. (NS)

Providing and fixing 15 mm to 18 mm thick Z-Black granite stone (polished) on work top including matching grains laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, complete. (NS)

Providing and fixing IRC fabric of required size made of 2.90 mm to 3.25 mm diameter wire, in MS frame including 3 mm thick MS flat iron cover moulding of 12.5 mm width fixed with machine screws, welded, complete in all respects as per architectural drawing & design (excluding cost of MS frame that will be paid under HSR 18.35) (NS)

Supplying and filling Jamuna sand in depressed portion of toilets, complete in all respect as per specifications. (NS)

Public Health work 51 to Loading unloading of building rubbish.{HSR 4.1 (a)}

Disposal/ carriage of material / building rubbish (metalled road) with a lead of 2 K.M. excluding loading, unloading (HSR 5.2(a)}

Excavation of trenches in streets, lanes or in open areas for storm sewer, sewers running by gravity and manholes to full depths as shown in drawing including shoring, timbering of poling boards, frame system type, dressing to correct sections and dimension, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc., night signals, profiles, pegs, sight rails, boning rods, crossing over trenches, for access to the houses, watching, fencing, etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil, from site of work, up to a lead of 1 K.M. in ordinary soil {HSR 6.10(a)} (a) for depth of excavation not exceeding 3 metres below ground level

Dismantling cement conglomerate/ terrazzo floors 25mm to 50mm thick including concrete base.{HSR 8.25)

Dismantling white or coloured glazed tiles (to be carefully removed) (HSR 8.38)

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth.(HSR 10.28)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level (HSR 10.59)

Cement conc. 1:2:4 with stone aggregate 20 mm nominal size for reinforced conc. Work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.82)

Extra over item Nos.10.79 to 10.94, if 1:1½:3 mix is used instead of 1:2:4. {HSR 10.95(a)}

Providing and laying four courses of water proofing treatment consisting of first and third course of blown type bitumen grade 85/25 applied hot at 1.6 kg per sqm for each course and second course of fibre glass R.P. Tissue and fourth and final course of stone grit 6 mm and down size or pea-sized grit spread at 0.006 cum per sqm incluidng preparation of surface. (HSR 13.62)

Providing and lying cinder concrete in cement 1:15 (1 cement and 15 cinder) on terraced roofs & ( Ist storey) , laid to slope , including consolidating the same (HSR 13.66)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Terrazzo topping rubbed and polished to a granolithic finish under layer 34 mm thick cement concrete 1:2:4 and top layer as specified below (HSR 14.25)

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles (HSR 14.91) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI & RAK. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete {HSR 14.92 (b)} (b) size of ceramic glazed tiles 300 mm x 450 mm

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

White washing two coats (HSR 16.47)

Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC incluidng straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position, complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any, separtely for different diameters as actually used in work excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 18.22)

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets elbows etc. inside building and testing etc. complete including cutting threading. {HSR 28.18(b) (i)} INCLUDING COST OF SPECIALS (i) 15 mm internal diameter of pipe line

(ii) 20 mm internal diameter of pipe line {HSR 28.18(b) (ii)}

(iii) 25 mm internal diameter of pipe line {HSR 28.18(b) (iii)}

(v) 40 mm internal diameter of pipe line {HSR 28.18(b) (v)}

(vi) 50 mm internal diameter of pipe line {HSR 28.18(b) (vi)}

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets, elbows etc. in trenches in the ground, cutting, threading and testing etc., complete. {HSR 28.19 (h)} (h) 80 mm internal diameter of pipeline

(i) 100 mm internal diameter of pipeline {HSR 28.19 (i)}

Extra for fixing and jointing union couplings in G.I and W.I pipe lines. (HSR 28.21 (b) (b) 20 mm internal diameter

(c) 25 mm dia (HSR 28.21 (c)

(e) 40 mm dia (HSR 28.21 (e)

(f) 50 mm dia (HSR 28.21 (f)

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 28.24 (a) (a) 11.43 cm thickness wall

(b) 22.86 cm thickness wall (HSR 28.24 (b)

Cutting holes up to 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing, replastering, replacing bitumen and colour or white washing where required. {HSR 28.26(b)} (b) 115 mm thickness of roof of floor

Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I pipelines laid in the ground or inside buildings including cartage from divisional stores or nearest railway station to site of works. {HSR 28.29 (b)} (b) 20 mm internal diameter

(c) 25 mm internal diameter {HSR 28.29 (c)}

Making connection with the existing G.I branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. (HSR 28.34)

Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR 29.84 (c) (c) size 600 mm x 900 mm inside ( with 455 mm x 455 mm cover and frame light duty single weighing 20 kg with R.C.C. slab)

Providing slat glazed stone ware pipes grade ‘A’ in standard length of 600 mm each pipe marked with is: 651 and their lowering, cutting, jointing and testing as desired in HSR item No. 29.38, 29.39, 29.40, including the cost of jointing materials as well as carriage, loading, unlloding stacking, handing, re-handling etc. complete in all respects to the satisfaction of Engineer-In Charge. (HSR 29.95) 150 mm internal dia

Providing and fixing in position best Indian make (to the approval of the Engineer-in-charge). Indian type Orissa or orya water closet suite for sinking into floor, with raised foot treads complete with 100 mm H.C.I ‘P’ trap with or without vent as required and all other necessary fittings as fully described in item no. 30.1 above (without cost of C.I. high level flushing cisterns) (based on 30.2(a)(i)} (a) 580 mm (i) WHITE

Providing and fixing in position best Indian make European type water closet suite with concealed ‘P’ of ‘S’ trap with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item No. 30.3 above (without cost of C.I. high level flushing cisterns) {based on HSR 30.6(i)} (White)

Extra over item no. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. {HSR 30.13 (i)} (i) White plastic seat ( Solid)

Extra for providing and fixing 32 mm dia. G.I/ C.P flush pipe complete with accessories instead of 32 mm dia. Galvanised telescopic flush pipe with clips ( as required by the Engineer-in-charge) {HSR 30.15(b)} (b) 32mm dia C.P brass flush pipe

Providing and fixing in position best Indian make large flat back or angular lipped front Urinal 610 mm high consisting of (i) Flat back lipped or angular urinal basin or vitreous chinaware, (to the approval of the Engineer-in-Charge) {HSR 30.25(i)} (i) White

Providing and fixing in position best Indian make a range of two urinals large flat back or angular lipped front 610 mm high in vitreous china-ware with 5 lit capacity best Indian make C.I automatic flushing cistern with fittings and flush pipe etc. complete as fully described in item no. 30.25 above, {HSR 30.26(i)} Range of two urinals (i) White

Extra for providing and fixing vitreous automatic flushing Cistern including fittings and brackets of C.I. flushing cistern complete {HSR 30.37(a)(i)} 5 ltr. capacity cistern (i) White

Providing and fixing 25 mm thick marble partitions for different type of urinals. {HSR 30.40(b)(II)(i)} (b) Vitreous Chainaware Partition Plate (II) LARGE SIZE 835 mm x 355 mm (i) White

Providing and fixing in position best Indian make (ordinary) lavatory suites consisting of Lavatory in vitreous china ware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary, R.S or C.I brackets for building into wall including painting;32 mm C.P. brass waste with C.P brass chain and rubber plug;15 mm C.P brass screw down pillar tap with jamnuts or couplings best design ( as approved by the Engineer-in-charge) all fittings best Indian make and; to the approval of the Engineer-in-chargeall brass work chromium plated and complete in all respects including cutting and making good the walls and floors and painting of fittings etc. {HSR 30.41(iv)} (iv) size 550 mm x400 mm with one no tap

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 kg per meter and 2.8 mm thick) up to floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) (HSR 30.48)

Providing and fixing in position best Indian make chromium plated brass bottle trap 32 mm diameter {HSR 30.50}

Providing and fixing 40mm G.I waste pipe embedded in walls or lead waste pipe weighing 4.46 kg/ metre and 3.0 mm thick up to floor level as required by the Engineer-in-charge including cost of union and plumber joint. (HSR 30.62)

Providing and fixing in position best Indian make shower with 15 or 20 I/d out let. {HSR 30.66 (c)} (c) C.P. brass with revolving joint

Providing and fixing in position best Indian make paper holders fixed into wall with C.P brass screws complete in all respects including cutting and making good the walls etc. {HSR 30.67(a)} (a) C.P. brass

Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P brass screws ( as required by the Engineer-in-charge) complete including cutting and making good the walls etc. {HSR 30.71(a)(i)} (a) INDIAN MAKE (i) 600mmx450mm

Providing and fixing in position 15 mm i/d C.P brass bib cocks of best quality ( as required by the Engineer-in-charge) {HSR 30.75(a)} (a) Bib cock lond body.

(c) Bib cock {HSR 30.75(c)}

Providing and fixing in position C.P brass stop cock (as approved by the Engineer-in-charge) {HSR 30.76(a)(ii)} (a) 15 MM STOP COCK (ii) concealed stop cock with flange

Providing and fixing in position best Indian make C.P brass inlet connection 15mm with 375mm pipe and C.P brass nuts. {HSR 30.83}

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition {HSR 30.95(a) (a)size 75 mm X 75 mm

Providing and fixing HDPE WATER STORAGE TANKS of sintex, diplas O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (HSR 30.119) 2000 Ltr. Capacity

Supply of GI pipe 'B' Class ISI Marked Ravindra/Jindal/Parkash(Surya) Make. (NS) (a)15 mm i/d

(b)20 mm i/d

(c ) 25 mm i/d

(d) 40 mm i/d

(e) 50 mm i/d

Supply of GI Union Couplings of UNIK/UNCO make . (NS) (a)20 mm i/d

(b) 25 mm i/d

(c) 40 mm i/d

(d) 50 mm i/d

Supply of Gun Metal Peet Valve ISI Marked of DRP/Leader/Bajaj make (NS) (a) 20 mm i/d

(b) 25 mm i/d

Supply of PVC pipe 6 kg/cm² pressure of ISI marked of Prince/Supreme/Skipper make (NS) a) 90mm o/dia (3” i/dia) size

b) 110mm o/dia (4” i/dia) size

Providing and fixing in position PVC flushing cistern 8.0 ltrs. capacity of Hindware/Cera/perryware make ISI marked, white, alongwith fittings complete in all respect. (NS)

Supply and fixing of PVC floor traps (Heavy duty) of 90mm i/dia outlet of Prince /Supreme/Skipper make, complete in all respect. (NS)

Supply and fixing of PVC gully traps (Heavy duty) of 100 mm dia size ( 4") with cover and frame of Prince/Supreme/skipper make complete in all respect. (NS)

Providing and fixing CP brass jet along with flexible pipe 15mm i/d and patti etc. of best quality complete in all respect (excluding cost of CP brass concealed stop cock).(NS)

Supply and fixing of PVC specials of Prince / Supreme/Skipper make as per detail given below:- (NS) (a) 80 mm i/dia (3" i/dia)size (i) PVC Door Junction

(ii ) PVC plain elbow

(iii) PVC door elbow

(iv) PVC cowls

(v) PVC junction plain

(vi) PVC Tee 3" x 3" x 3"

(b) 100 mm i/dia (4" i/dia) size (i) PVC Door Junction

(ii ) PVC plain elbow

(iii) PVC door elbow

(iv) PVC cowls

(v) PVC junction plain

Providing and fixing C.P brass grating 4" dia size of best quality, complete in all respect. (NS)

Supply and fixing in position double bowl stainless steel sink made of 1 mm thick Salem stainless steel sheet along with fittings of Blue Star/ Jayna make or equivalent approved by the Engineer In-charge as per AISI 304 (18/8), complete in all respect. (NS) Overall size = 37" x 18" x 7"

Supply and fixing in position stainless steel sink made of 1 mm thick Salem stainless steel sheet along with fittings of Blue Star/ Jayna make or equivalent approved by the Engineer In-charge as per AISI 304 (18/8), complete in all respect. (NS) Bowl size = 560 mm x 405 mm x 178 mm Overall size = 610 mm x 460 mm x 178 mm

Providing and fixing in position Vitrous China ware large flat back lipped or angular urinal pan/basin 610 mm high, white, with 32 mm CP brass waste with dome grating and C.I. bracket etc. of Hindware/Cera/Perryware make first quality, complete in all respect. (NS)

Suraj Bhan Contractor