Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC STATION ROAD POST RANGIYA DIST KAMRUP ASSAM PIN 781354 | KAMRUP | ASSAM | 781354 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹43.9 L+₹2.0 L (4.75%)Rejected-Finance REGD OFFICE DALBARI SATGAON GUWAHATI ASSAM 781171 | KAMRUP METRO | ASSAM | 781171 | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹44.7 L+₹2.7 L (6.53%)Rejected-Finance C O DR UMASHANKAR SHARMA RANGIYA TINIALI NEAR RAIL GATE POST RANGIYA DIST KAMRUP ASSAM PIN 781354 | KAMRUP | ASSAM | 781354 | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹45.7 L+₹3.8 L (9.01%)Rejected-Finance OLD MISSAMARI PO PS MISSAMARI DISTT SONITPUR ASSAM PIN 784506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | Rejected-Technical RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | - | Rejected-Technical Being No remark in WLR CE Shillong Zone for QE Mar 2023 |
Tender Value
₹46.3 L
EMD Value
₹92,540
Closing Date
11 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
PROVN OF 03 X SINGLE OFFR LIVING ACCN AT TAMULPUR UNDER GE RANGIA
2023_MES_597631_1
CWE/TEZ(R)/T-04 of 23-24
Open Tender
Civil Works
Item Rate
270 days
GE Rangia
as per tender docus
8 documents required · 8 mandatory
₹500
GE Rangia
₹92,540
Yes
28 Jul 2023
23 May 2023
13 Jul 2023
23 May 2023
11 Jul 2023
27 Jun 2023
Amount
Surface dressing n exc 15 cm deep and getting out in Soft/ Loose soil
Excavating in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil.
Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.
M&L for anti termite treatement by treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area all as specified and as directed.
M&L for anti termite treatement by treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete and as specified and as directed.
M&L for anti termite treatement by treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete and as specified and as directed.
M&L for anti termite treatement by treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete and as specified and as directed.
M&L for anti termite treatment to the soil alongwith external perimeter of bldg by emulsion @ 2.25 ltrs per metre of the perimeter wall.
Brick work with sub-class `B' Old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6
All as per item no. 06 above but as in half brick thick walls built in CM 1:4.
M&L for levelling sand filling under floors including spreading, watering and consolidation for raising PL.
M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface.
M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and as directed.
M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 40mm thick as in floor finished fair and even for laying of leveled bed.
75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections finishing the surface without extra cement even and smooth complete all as specified and as directed.
M&L for finishing the concrete surface even and smooth using extra cement, complete all as specified and as directed.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6
M&L for Coloured Glazed ceramic tiles 450 x 350 x 6-7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick rendring layers in CM 1:4 complete all as spd..
Vitrified Ceramic polished tiles of light shade 600x600 mm in size, 8-10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. completed all as specified and as directed.
Vitrified Ceramic polished tiles of light shade 600x600 mm in size, 8-10 mm thick,, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4. completed all as specified and as directed.
M&L for Soild PVC moulded Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing
M&L for factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing frame at site as per specification
S&F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinges.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F 200 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified.
S&F Pressed steel double door frame of size 60 mm x 125 mm for doors with one or more rebates including necessary fixing lugs ,hinges, lock strike plate etc,as specified,supplied & fixing in opening as per specification and drawing including filling of PCC (1:3:6) in 12.5 mm aggregates complete all as specified and as directed by the Engg-in-charge.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, and also one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by the Engg-in-charge.
S&F Factory made solid wood grain printed gauged PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; but fully gauged sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section
S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F 300 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified. Make - Classic , IPSA , Bharat
M&L for Preparation of newly untreated wood or wood base surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of zink chromate primar.
M&L steel ventilators with top hung shutter inc hinges , steel peg stay ' complete all as specified and directed
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane
S&F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with 5mm thick PVC sheet fillet of width 35mm / stainless steel wire staples complete all as specified and as directed.
S&F aluminium colour powder coated (shade or tint as directed by GE) window frame of three track using Jindal or equivalent section No 20832 fixed with thrust bolt in walls by drilling and sliding shutter of section No 20844 (40x18x1.29mm) or equivalent section for glass including 3-4mm thick tinted /reflective glass fixed with rubber beading and bushes complete in two track and 0.36 mm dia and 1.40mm aperture stainless steel wire mesh fixed with screw and aluminium beading incl aluminium grill consists of 5mm thick 50mm spacing complete, all as specified and as directed by Engg-in-charge.
M&L for rounding to edges of stone slabs one edge ,such as in steps ,cooking platform and other similar situations complete all as specified and as directed
M&L granite (any type) slab 20 mm thick laid with 10mm thick CM 1:4 as in bedded in floor /wall and top of partition wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and directed by Engr-in-charge
25 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 incl wpc as specified by manufacturer (Using 12.5 mm graded stone aggregate)
S&F GI Powder coated snap grid frame work for false ceiling of grid size 600x600 mm comprising of 4 mm thick designer and pre-painted non-asbestos Cement fibre board of size (595x595)mm duly suspended with 2 mm dia GI wire fixed with steel dash fasteners or iron purlins from the roof etc. complete all as per specified and as directed by the Engg-in-charge.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of black japan paint over a coat of red oxide zinc chrome primer.
M&L, 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete block surfaces finished even and smooth without using extra cement.
M&L, 10 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete block surfaces finished even and smooth without using extra cement.
M&L for preparing new plastered surfaces and applying two coats of cement base paint over a coat of chalk whiting on surfaces of walls.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant priming paint applied over 1.5 mm thick wall care putty finished even and smooth on wall all as specified and directed by Engg-in-charge. .
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979, complete all as specified and as directed by the Engg-in-charge.
S&F Mild steel work in hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engg-in-charge.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engg-in-charge.
M&L RCC for M-25(design mix) using 20 mm graded agg as in footings, foundation,beams; plinth beams; bases for columns, etc complete all as specified & directed.
Formwork to sides and soffits of concrete foundations,plinth beams and similar work for finished flat surfaces.
M&L for RCC M-25(design mix) using 20 mm graded agg as in columns ,pillars,piers,posts and struts etc all as specified and directed by the Eng-in-charge.
Use and waste of form work to sides of pillars, posts, struts, piers , and stanchions for rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC M-25(design mix) using 20 mm graded agg as in beams, cantilevers, bressummers, lintels over1.5 m span all as specified and directed
Use and waste of form work to sides and soffits of roof beams ,lintels etc rough finished surfaces complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded agg as in chajjas, etc complete all as specified & directed.
Formwork to chajjas and similar items including edges as in fair finished flat surfaces of concret.
M&L for RCC M-25 (design mix) using 20 mm graded agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
Use and waste of formwork to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping)
M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified.
M&L mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed by Engg -in-charge
S&F 32 mm bore outer dia concealed CPVC pipes SDR 13.50 & plain CPVC SDR-13.50 fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
S&F 25 mm bore outer dia concealed CPVC pipes SDR 13.50 & plain CPVC SDR-13.50 fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
S&F 20 mm bore outer dia concealed CPVC pipes SDR 13.50 & plain CPVC SDR-13.50 fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors.
S&F 25 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed.
S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I
S&F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F 2 in 1 Bib Taps 15 mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.
S&F 15 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe.
S & F 15 mm bore fancy type stop valves / angle valve, chromimum plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F 15 mm bore brass fancy type CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & F 15 mm bore brass fancy type CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & Fixed chromium plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long easy Flex tube in chrome finish complete all as directed .
S&F Vitreous China wash down water closet pan (pedestal pattern), white white complete including seat cover, flush pipe including all joints, complete all as per specified and as directed by Engineer-in-charge.
S&F Vitreous China premium wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) with pedestal including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm
PVC valve less, syphonic action type flushing cistern (10 ltrs capacity), low level, white with inlet ball valve float and handle including brackets and flush pipe.
S&F PVC Connections 15 mm size with PTMP nuts of length 600 mm
S&F waste coupling brass, chromium plated with long shank, half thread, 32mm dia, for WHB/urinal etc. complete.
S&F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.
S&F 75 mm dia PVC (SWR) pipes single socketed , in any length , incl bend/branches/T-junction/ reducer, laid in trenches or in floors complete all as per specified and as directed by Engineer-in-charge.
S&F PVC (SWR) vent cowl 75mm bore fixed to vent pipe.
S&F 110 mm dia PVC (SWR) pipes single socketed , in any length , incl bend/ branches/ T-junction, laid in trenches or in floors
S&F 150 mm dia PVC (SWR) pipes single socketed,with rubber rings, in any length, laid in trenches or in floors, incl bend and junction complete all as per specified and as directed by Engineer-in-charge.
M&L concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150 mm dia bore of pipe in cement concrete 1:3:6 type C-2 all as specified and directed.
S&F, brass chromium plated Tubular towel rail, 20 mm dia, D type 600 mm long between flanges complete.
S&F Soap dish, CP decorative type of approximate size 160 x 160 x 90 mm.
S&F in repair 125mm size brass chromium plated shower rose complete.
M&L for Precast cement concrete 1:2:4, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4.
M&L for Cement concrete in surface channels and drains 1:3:6 type C-2 (40mm graded aggregate) as in bed / side of drain, complete all as specified and as directed.
M&L, 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete block surfaces finished even and smooth using extra cement.
Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. complete for 10 users.
Soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed in concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab, RR masonry/filling with brick bats, complete of size 1.8 M dia X 3.0 M deep.
M&L, 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in pavings and path etc. Complete all as specified and as directed.
M&L for PU coated coloured Chequered Pre- Polished cement concrete tiles 300x300x25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry laid over and incl 20 mm thick of screed bed or bedding layer cement mortar 1:6, for laying floor finishes.
Providing precast cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 complete all as directed by Engineer in Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/loose soil.
Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point.
S&F, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 25mm bore pipe.
Point Wiring with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly or as directed and GI/MS terminal box (For normal/modular switch socket) with 3.00 mm thick hylam cover fixed flush to Wall complete :-
(a) One light point controlled by one switch
(b) One fan point controlled by one switch
(c) One 3 pin socket out let 5 Amps on independent board.
(d) One 3 pin socket out let 5 Amps on same board
All as per item No. 102 above but with 4 sqmm ( Nominal area ) cable with 4.0 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete.
Supply and fix MCB protected socket with sheet metal enclosure, 3 pin socket with plug top and one single pole MCB 20 Amp capacity complete.
S&F switch piano flush button single pole 5Amps 230 volt one way complete all as specified and directed.
S&F ceiling Rose, surface bakelite three terminals complete.
S/F Socket outlet 2 in 1, 3 pin, 5A, flush type piono Universal type,controlled by One Switch, conforming to IS and/or as approved, complete.
S/F Switch Socket Combination 3 Pin 5/6 Amp, Flush Piano Universal Type, controlled by One Switch, conforming to IS and/or as approved, complete.
S/F Switch Socket Combination 6 Pin 5/15 Amp, Flush Piano Universal Type, controlled by One Switch, conforming to IS and/or as approved, complete.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supply and fix LED light fitting single tube 1 X 22 Watts, 240 V surface and wall mounted led batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable with 1.5M long suitable size complete.
S&F Street light fittings 1x 20 Watt LED New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENINg seperate driver compartment with IP65 protection and impact resistance of IK07 and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size complete.
S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32 mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for fixed on wall including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F sheet metal enclosure for double door SPN 12 Ways DB'S when MCBs to be used single pole neutral 240 Volts complete of following sizes all as specified and directed.
S&F MCB Single pole and neutral 240 Volt 20 to 40 Amp capacity complete.
S&F MCB Single pole 240 Volt 6 to 32 Amp capacity complete all as specified and directed.
M&L for sub main wiring two run of size 6 sqmm PVC insulated electric power cable (heavy duty) 1100 volts grade with stranded copper conductor with 6.0 sqmm PVC insulated copper conductor earth wire in casing caping of suitable size (two run of 6 sqmm cable and one of 6.0 sqmm wire and one run of PVC conduit / casing caping will be measured as one unit) complete all as specified and as directed by Engineer-in-charge.
Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft/loose soil all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft/loose soil, complete all as specified and as directed.
Removing excvated materials (soils) not exc. 50.00 M and deposited where directed at a level not exc. 1.50 M above the starting point in soil, complete all as specified and as directed.
M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed.
Supply & Laying Sub-Class B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and directed.
Supply, fixing ,Teting and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 16 Sqmm, 4 Core all as specified and directed.
Supply laying GI pipe 40 mm bore light grade for protection of U/G cable
S & F ceiling fan hook made out of MS flat 50 X 6 mm thick suitable for hanging of ceiling fan including nuts, bolts and washer with 12 mm dia round bar hook complete all as specified and directed after taking down old one
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion.NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
S & F blank plate for MCB DB
S & F MCB DB 4 way TPN double door
S & F MCB TPN, 415, 32 Amps, 10 KA
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.
M/s Talukdar Construction
M/S S.S. Construction
M/S TANISHQ CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .