SPECIAL REPAIR OF BLDG NO T-39 (OR LIVING), 80 MTR EXISTING WALL AND OTHER SANCTIONED WORKS UNDER GE AMRITSAR

Amount

B/R PORTION Surface dressing n exc 15 cm deep in any type of soil

M & L for excavation over areas, n exc 1.5 m deep in any type of soil and getting out

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in any type of soil complete all as specified and as directed.

Returning, filling in, excavated earth including spreading levelling , watering including well ramming in layers not exc 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil

Filling in floors using surplus excavated soil Spreading and levelling in layers n exc. 25 cm thick and rammed including watering

Dismantling structural steel work all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mrtar complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

Demolition of RCC as in purlins in any position

Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc all as specified .

M & L Brick work using sub class B bricks (Old size) sttaight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L for brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:6.but except brick

M & L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in Cm 1:4

M&L for Cutting out bricks, forming toothing for, and bonding new into old work in CM 1:6 including value of new materials value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only)

M & L cement concrete 50 mm thick 1:3:6 type C-1 using 20 mm graded stone aggregate as plinth protection etc finishing the surface even and smooth without using extra cement completed all as specified and directed.

M&L for 40 mm PCC 1:2:4 type B0(using 12.5mm graded stone aggregate ) in coping ,and for Damp proof course to horizontal or vertical surfaces including necessary formwork finished even and smooth complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in roof rounded or chemfered or roof padding Support to post/ Strut in fencing ,bed blocks for rungs and back filling of pressed steel frame all as specified and directed.

M & L for 75 mm thick PCC Type D-2, 1:4:8, (using 40 mm graged aggregate) as in sub bloors, sub bases of floors and pavings etc

M & L for providing cement concrete work in pavement / hard standing Type B-1, 1:2:4, (using 20 mm graded aggregate 200 mm thick including necessary glass deviding strip of 50mm wide at 3m spacing bothways

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 100 mm dia SWG pipe complete all as specified & directed.

M&L Cement concrete type D2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed.

PCC 1:2:4 type B-2, using stone aggregate 40mm graded as in foundation for post including necessary form work where required and fair finish to the exposed surfaces all as specified & directed by Engr-in-charge

Formwork to sides of fair finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.

Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

Fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings , cantilevers, shelves chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work

M&L RCC 1:2:4(Nominal mix) type B1 (using 20 mm graded stone aggregates) as in column footings, plinth beams complete all as specified and directed

M&L RCC 1:2:4(Nominal mix) type B1 (using 20 mm graded stone aggregates) as in columns complete all as specified and dirfected

M&L RCC 1:2:4 (Nominal mix)(using 20 mm graded stone aggregates) as in roof beam, lintel beams complete all as specified and directed.

M&L RCC 1:2:4(Nominal mix) (using 20 mm graded stone aggregates) as in chajja and fascia complete all as specified and directed

M&L RCC 1:2:4(Nominal mix) (using 20 mm graded stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves upto 6 mtr height etc complete all as specified.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing wit

M&L for mild steel angle/flat iron in post and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire , flate iron, etc conforming to Fe-290 Gde E-165 complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer, purlins etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240

M&L for mild steel round bars, 10mm dia and over cut to length, bent to shape required including cranking, bending, fixed for chain link fencing complete all as specified & directed.

S&F Framed work confirming to FE- 290 (Gde-E- 165) as in doors chowkhats, gratings, grills/guard bars iron doors ladders; framed balusters walk ways railings framework of watertanks or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete

S&F mild steel bolts screw (machine made) with hexagonal or square head at one end and scrw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 11 to 15mm, complete all as specified and directed.

S&F Galvanised , 3 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and staining and fixing to any type of standard rails all as specified and directed by Engr-in-Charge.

Fixing only of Chain link fencing including including line wires,any mesh,size and type of standards,rails,straining bolts,etc including provission of binding wire complete all as specified and directed.

Supply of Chain link MS galvanisd fencing any size or type weight more than 4.00 kg/sqm complete all as specified and directed.

M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces other than fair finished the surface even and smooth without using extra cement mixed with water proofing compound (included in quoted rate) complete all as specified and directed

M&L rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 internally and finished even and smooth ( without using extra cement ) complete.

M&L rendering 10mm thick on ceiling on fair faces of concrete surface in cement mortar 1:3 and finished even and smooth ( without using extra cement ) complete.

M&L for prepration of newly/ old plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

Preperation of new or previously untreated steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified

M&L two coats of synthetic enamel paint over a coat of pink primer over wooden surfaces including preparation fo surfaces complete all as specified.

Preparation of Newly/old Plastered/ unplastered surfaces of Wall/ceiling and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer all as specified and directed.

M&L for applying two coats of white wash wall surface and all as specified as directed by Engr-in-Charge.

M&L for preparation of new ceiling surface and applying 3 coats of white wash all as specified as directed by Engr-in-Charge.

S&F 0.50mm thick Pre-Painted Galvalume Aluminium Zinc Coating GI based Corrugated steel sheet of any colour having tensilre strength of 550 MPA as in Roofcovering/ Cladding to walls fixed with self tapping screws complete all as manufactures instructions and as directed by Engineer- in -Charge

S&F 0.50mm thick Pre-Painted Galvalume Aluminium Zinc Coating GI based plain steel sheet of any colour having tensile strength of 550 MPA as in Roofcovering/ Cladding to walls fixed with self tapping screws complete all as manufactures instructions and as directed by Engineer-in-Charge

M&L for preparing plastered surfaces of any description and applying two coats of flexible polymer acrylic water proofing oating 1mm thick (total thickness of dry film is in two coats) using Dr Fixit Pidifine2Kg of M/S Pidilite Industries or Brush Bond of M/S Fosroc (India) Pvt Ltd complete all as specified and as directed by EIC.

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each all as specified and directed.

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each all as specified and directed. (as in doors)

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for prepainted Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of tiles 80 mm thickness, fixed over 25mm thick sand cussion as in floors complete all as specified.

M& L for Box type steel window double (glazed & gauged) emade of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfast primer etc, all as shown on drg No.CEJZ/TD-06/07 and CEJZ/TD/07/07 complete.

S & F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 primer coated complete all as spd.

Supply and fixing18 mm thick PVC board as in cupboard shelves, in kitchen cabinet etc complete all as specified. Make:- Rajshri/Sintex

Supply and fixing 5 mm thick PVC sheet as in back side of kitchen cabinet etc complete al as specified. Make:- Rajshri/Sintex

Supply and fixing18 mm thick PVC sheet shutter one side prelaim of any shade as in kitchen cabinet etc complete all as specified. Make:- Rajshri/Sintex

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube , all as per specification and drawings.

S & F factory made solid panel PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the ms frame welded/ sealed & rail with suitable PVC sheet beading, and joined together with solvent cement all as per specification & drawing.

S&F factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specfied and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised all as specified of size 150mm long

S & F 200 mm alluminum anodised barrel tower bolts of extruded sections and fixed complete.

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.

S & F butt hinges 100 mm size medium weight cold rolled mild steel (zinc chromate coating)ccomplete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staples.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-Charge

S & F 10 ltr capacity PVC valveless,syphonic action type, flushing cistern, low level, shite, with inlet, ball valve, float and handle including brackets.

Supply and fixing vitreous china pestel EWC with s and p trap including connection to drain ( or outgoing pipe ) and flush pipe including seat cover complete

S&F vitreous china white wash hand basin white flat back size 550 x400 including low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin etc complete all as specified and as directed.

S&F in repairs vitreous china bowl urinal flat back half stall type white colour size465x355x265mm (min) white with gratiingxin and union for discharge pipe incl providing and fixing plug bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement all as specified.

Supply & Fixing for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing 15 mm bore complete all as specified.

Supply & Fixing for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing 20 mm bore complete all as specified.

Supply & Fixing Bib taps, cast copper alloy fancy type, chromium plated, with long shank long body (concealed type) for sink with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15mm bore complete all as specified.

Supply & fixing stop valves, cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe of size 15mm bore all as specified.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipeof size 15mm dia bore of pipe and fixed

Cleaning of existing static water tank capacity 10000 gallon of size 5 m inner dia by pumping out water from bottom by using diesel engine driven watering pump set , taking out soil deposit/silt approximately 0.30m thick from bottom of static water tank and removing the same to a distance exc 100m and not exc 200m complete all as specified and directed

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

S&F rotational moulded polythyene 500 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting. All as specified and directed

Supply & Fixing Gun metal bronze globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, bore 20 mm dia of pipe.

S&F in low density polythene (LDPE) pipe of pressure rating 6 kg/sqcm, 32mm bore for waste pipe of wash basin etc complete all as specified and as directed.

S & F 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified

S&F 150x150mm size Salt-glazed stoneware gully traps, square or round mouthed, type `P'

S&F Stack clamps for 100mm dia pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof

S&F Soap dish, vitreous China white, approximate size 160x160x90mm

S&F Towel rail 450mm long of stainless steel chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or wall ( Joining to be done with solvent cement ) including PVC brackets.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or wall( Joining to be done with solvent cement ) including PVC brackets.

S & F 110mm bore PVC (SWR ) bends and radius.

S & F 110mm bore PVC ( SWR ) 'P' trap.

S & F PVC connections 15mm size with PTMT nuts of length 450mm.

S & F 110mm bore PVC ( SWR ) vent cowl

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm at 180 degree temperature in each layer ( first layer below APP membrane and second layer above APP membrane) on 0.40 kg/sqm bitumen primer surfaces including cleaning surfaces etc complete all as specified and directed

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen surfaces by forced application complete all as specified.

M & L 40mm thick brick tiles laid over15 mm thick cement plaster(1:4) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ), interlockin tiles removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 20mm thick screed bed in CM 1:6 & complete all as specified and directed.

Supply and fixing Glazed cermic coloured tiles 450mm x 300mmx 7mm thick on vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick backing coat of cement mortar 1:4 complete all as specified

Supply and fixing coloured vitrified tiles 9 to 10 mm thick (Square / rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 complete all as specified

Supply and fixing coloured vitrified tiles 9to 10 mm thick (Square / rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.36 Sqm vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified

M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4.

Taking down and refixing of MS grid size n.exc 1.2M x 1.2M with necessary repair/replacement of supports.

S&F 6mm thick Asbestos cement plain building boards, fixed to framework with screws

M&L for 18 - 20 mm thick machine cut kota stone of size 22" x 22" including grinding & polishing to achieve mirror finish over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors,staircase landing etc including rubbing and pollishing complete including 20 mm thick screed bed in CM 1:6 all as specified and directed.

S&F drain pipes of 150mm bore RCC NP3 laid in trenches and jonted and tested complete all as specified

Cutting into existing manhole for connecting new drain pipe of 150 mm bore and making good the pipe and rendering disturbed surface where drain pipe have been inserted cutting out existing benching for forming branch channel (1/2 round or 3/4 round as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required and directed by Engineer - in - Charge.

S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm, complete all as specified.

Hangers 3 mm dia G.l (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.l. flat 40 x 3 mm size 60mm long complete all as specified.

M&L 4 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws

M & L for 75 mm thick PCC 1:2:4 type B-1 (using 20 mm graded ston aggregate) in flooring and finishing the surface fair and even incl roughening the existing surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete.

Forming construction joint 30 mm deep x 10 mm wide filled with sealing compound.

E/M PORTION Taking down old unserviceable point wiring any type from existing conduit (light, fan, socket or power point etc) complete such as switches, ceiling rose, pendent, regulator and socket etc and removing the material FRLSom site and making good the disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, whitewash/colour/distemper etc complete all as complete all as specified and directed.

Point wiring complete with 1.5 Sq mm (nominal area) FR PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 25 mm dia and 1.5 mm wall thickness and conduit fittings including FR PVC insulated unsheathed 1.5 Sqmm copper earth wire to common earth and connecting to earth dolly and Metal Flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoated rate.) Make:- Havells, Finolex / RR Kabel (a) One light point/Bell/Fan point controlled by one switch.

All as per item No 127 above but one 3 pin 5 amps switch socket on independent board.

All as per item No 127 above but one 3 pin 5 amps switch socket on same board.

All as per above item herein before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 2.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 126 to 130 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads.

Supply and fix switch piano one way 5 A, SP, 230 Volts.Make : Anchor/SSK/Cona

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type. Make : Anchor/SSK/Cona

Supply and fix Switch outlet 2 in 1, 3 pin15 Amps Flush type. Make : Anchor/SSK/Cona

S & F Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size & MS box of suitable size and making good surface as original by plastering and whitewash/colour/distemper etc complete all as specified. Make : Anchor/SSK/Cona

S & F wall /ceiling mounting LED 18 tube light fitting complete with all acessories 1x18 Watt LED , suitable for domestic application, 240 Volts, 50 Hz, including one tube rod and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete Make Havell's / Wipro Phillps complete all as specified and directed.

S&F energy saving new generation 10 watt LED, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete. Make Philips/Wipro/CG

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as specified. (Note : cost of removing old wooden box and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) Make Schneider/Legrand/Hager

S & F in repair MCB double pole, 240 volts, 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Legrand/Siemens

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Legrand/Siemens

S & F MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make : HPL/Havells or equivalent Make : Legrand Lexic / Schneider , HAGER

S & F PVC Body fresh air fan heavy duty 250 mm sweep complete with including cutting of wall louvers etc complete all as specified and directed. Make Havells/ crompton/Orient

Material and labour service connection PVC cable 6 Sqmm 2 Core incl GI wire and PVC conduit for fixing in wall /pole incl connection completed all specified and directed.

Supply and fix stepped type electronic fan regulator flush type all as specified and directed. Make : Anchor/SSK/Cona

S & F lamp holder insulated body angular type with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size & MS box of suitable size and making good surface as original by plastering and whitewash/colour/distemper etc complete all as specified and directed. Make :- Anchor / Reo / Cona

Supply and fixing of 2X2 LED Slim Panel Light 36/40 Watt Recessed mounted suitable for false ceiling mounting complete all as specified and directed by Engr-incharge. Make Philips/CG/Wipro

S & F BEE star rated Ceiling fan 1400 mm sweep complete with downrode including fitting and fixtures as per site requirement and complete accessories suitable for 230 Volts single phase 50 Hz AC supply and connecting up with and including two core PVC insulated, PVC sheathed copper conductor all as specified and directed. Make: Havells/CG/Orient

Supply and fixing sleek LED Mirror light 9W fitting provided with high ourput difuser in 2ft version complete with all accessories and making all electric connection complete all as specified and directed Make Havells/philips/CG

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 3 runs of 6 sqmm single core multistranded copper conductor PVC insulated cables as neutral continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Note : 3 Run of 6 sqmm and 1 run of PVC conduit as mesuared as 1 unit Make of wire RR Kabel/Poly cab/Havells

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed. Make Legrand/Anchor/Crebitree (Schneider)

Supply and fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed of Make Philips/Havells/Polycab

M&L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor FR cable conforming to IS specifications, 2 runs of 4 sqmm including 1 run of 4 sqmm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall / ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring. Make of FR wire :- Polycab/Havells/RR Kabil, Make of PVC Pipe :- Polycab/Finolex/Kalinga premium. Note : 3 Run of 4 Sqmm and 1 run of PVC conduit will be measured as 1 unit.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor FR cable conforming to IS specifications, 2 runs of 2.5 sqmm including 1 run of 2.5 sqmm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall /ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring. Make of FR wire : Polycab/Havells/RR kabil, Make of PVC pipe :- Polycab / Finolex /Kalinga premium. Note : 3 run of 2.5 sqmm and 1 run of PVC conduit will be measured as 1 unit.

Supply and fix switch modular type one way 5A, 230 volt. Make :- Havells / Indoasian / SSK

Supply and fix socket outlet 2 in 1, 3 pin 6A modular type. Make : Havells / Indoasian / SSK

Supply and fix socket outlet 2 in 1, 16A modular type.

Supply and fix switch outlet 16A modular type.

M/s. M Company

tarlok singh contractor