PROVN OF ALUMINIUM WORK WITH WINDOWS, DOORS IN BLDG. NO P-36 (SINGLE OFFR LIVING), ADDN/ALTN TO KITCHEN TO BLDG. NO T-29 AND PROVN OF LIGHTING ARRESTOR, POWER CABLES AND EXTERNAL SERVICES FOR EXCHANGE P-45 AT NAYA RAIPUR STN UNDER AGE(I) NAYA RAIPUR

Amount

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified

M & L vitrified Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified.

M&L for coloured glazed ceramic tiles in vertical surface 300x200x5to6mm thick over and including 10mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed

Dismantling of wall and ceiling boards(fibre, pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets complete all as specified.

Supply & fixing 'E' board 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white,.the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as directed.Make : Everest/Armstrong/Ramco

M&L brick work built in CM 1:4 using fly ash modular bricks straight or curved on plan exc 6m mean radius complete all as specified.

M&L rendering 15mm thick plaster in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coat of oil bound emulsion distemper incl prepration of new plastered surface of wall over and including a coat of primer complete all as specified.

M&L for rendering 15mm thick plaster in CM (1:4) on brick or concrete surface in two layer of 10mm and 5mm thick each. Second coat of 5mm thick with water proofing compound as per manufacturer instruction finished even and smooth complete all as specified and directed (Note : WPC shall be measured and paid separately).

Supply only integral water proofing compound complete all as specified.

M&L preparing surface plastered or unplastered on wall with two coats of Cement base paint over and including a coat of alkali resistant primer paint with complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor to receive any type of glazed ceremic tiles complete all as specified.

M&L for Cement concrate in lintels upto 1.5m clear span 1:2:4 (20mm gradded stone aggregate) in window cills, steps; seismicand other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating incl form work complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified

M&L for reinforced Cement concrate in 1:2:4 type B1 (20mm gradded stone aggregate) as in slab supported on wall beams and columns in floor roofs landing balconies canopies deck slabs and shelves and like complete all as specified and directed

M&L for Granite tiles of any size 20mm thick machine cut stone slab over and including 15 mm thick cement screedt and jointed with grey cement slurry and pointed with white cement and ad mixture of pigment to match the slab of granite stone including grinding and polishing complete all as specified

S&F Mild steel TMT bars 5 mm dia and over upto including 10mm dia cut to length, bent to shape required including cranking, bending and binding with mild steel wire not less than 0.9 mm diaas in stirrups, spacers and binder complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified complete all as specified and directed by Eng-in-charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Eng-in-charge.

S&F Anodised aluminium frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as specified and directed by Engineer-in-charge.(Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.

S&F aluminium anodised barrel tower bolt 200 mm complete all as specified.

S & F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified and directed

S & F Aluminium handles, cast type anodised 150mm size complete all as specified

S& F Aluminium handles, cast type anodised 100mm size complete all as specified

S & F Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.2, universe type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S & F Sheet glass 4mm thick, ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5 Sqm in each pane complete all as specified

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F for 15mm dia angle stop valves cast copper alloy feney type,chromium plated complete all as specified and directed.

S&F Sheet glass 6.3 mm thick ordinary quality and glazing fixed with aluminium section in squares not exceeding 0.5Sqm in each pane complete all as specified

S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairs complete all as directed at site complete all as specified.

M & L for Point wiring complete with ISI marked 1.5 Sqmm single core, FRLS Grade, PVC insulated unsheathed cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade PVC conduit and accessories concealed in wall/roof/ceiling surface etc suitable for terminal boxes for fixing modular switches, sockets etc including suitable size modular plates concealed in walls and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch Make of Cable :- Havells / Polycab / Anchor and Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling

Ditto all as per item No 33 above but for One socket out let 5 pin 5 Amp on independent board

Ditto all as per item No 33 above but for One socket out let 5 pin 5 Amp on same board

Ditto all as per item No 33 above but using 4.0 Sqmm cable for one 15 A socket outlet point with 2.5 Sqmm PVC insulated, unsheathed copper conductor cable as earth continuity conductor.

S & F modular switch 1 way 6A 1 module complete all as specified and directed.

S & F modular socket 6A 2/3 Pin combined 2 module complete all as specified and directed.

S & F modular socket 6A/16A 2/3 Pin combined 2 module complete all as specified and directed.

S & F modular switch 1 way 16A 1 module complete all as specified and directed.

S & F for ceiling rose 3 phase/PVC/polycarbonated isolated body complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make Havells/Bajaj/Phillips/Wipro/crompton

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Havells/Bajaj/Phillips/Wipro/crompton

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. Make Usha/Havells/Bajaj/Crompton

Supply, lay and testing XLPE, insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade of 50 sqmm, 3.5 core cross sectional area laid in trenches/ poles/ ducts/ pipes or through sleeves etc., including connecting/ jointing with lugs complete all as specified and directed. Make : Polycab/Havells/Gloster

Excavation in trenches in any type of soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out for laying of pipe cables etc,. and getting out complete all as specified and directed

Returing filling in, including spreading levelling, watering and well ramming in layers not exceeding 25cm thick with earth obtained from excavation complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified in relevant clause of SSR Part I complete all as specified and directed. Note:- Punned down thickness shall only be measured and paid.

Supply and lay bricks sub class 'B' old size laid dry abutting each other with gap between adjacent slab not exceeding 10mm over UG cable as in cable protection complete all as specified and directed.

M & L for Air termination , single pointed , copper rod 12 mm dia and 300 mm long .and GI pipe 1.5 mtr complete all as specified and directed.

M & L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos . 8 mm dia 25mm long complete all as specified and directed.

M & L for earth continuity conductor using Copper strip 25x3 mm with saddle and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

M&L for Earthing complete with copper earth plate 60x60cmx3.15 mm thick electrode and 20x 3 mm Copper strip as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to 20x 3 mm Copper strip earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 2 and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh, charcoal dust and salt etc and connected to earthing test point all as specified or directed and testing.

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 1,500.00

M/s SKP CONSTRUCTION

m/s ramanuj singh and sons