Supply and fixing of furniture for School of Civil Engineering Department AT SMVD UNIVERSITY KAKRYAL KATRA

Supplying & Placing Modular table in completely knock down conditions with an overall size 1800mm X 2100mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1800mm X 900mm made up of 25mm thick Ply with laminate and sealed with 2mm thick PVC Edge Banding. Single sided flip-up/pop-up box shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. A pullout keyboard trey shall be provided of 18mm thick Ply with laminate with keyboard channel. The gable end shall be made up of 25mm thick Ply with laminate and profile shall be in linear shape with front full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 1200mm X 450mm X 750mm. The side unit shall be made up of Ply with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Ply with laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. Dimensions Tolerance ±20 mm.

Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made up of 15mm and (12+6)mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 30mm thick having density 32kg/m³. The same shall be upholstered with fabric air mesh tapestry 0.9mm thick and 300 GSM and Jute fabric tapestry 1mm thick and 300 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine with lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used adjustable polyurethane arm with PP base completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suite tham using the lever under the seat. . The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black nylon 30% glass filled, . The seat size shall be 485±10mm(W) X 500±10mm(D) and back size shall be 725±10mm(H) from seat & overall height = 1190±10mm. Dimensions Tolerance +/-20 mm.

Supplying & Placing Visitor Chair ergonomically designed for user comfort & shall have asthetically appealing design. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with fabric air mesh tapestry in black colour with 0.9mm thick and 300 GSM and the back shall be made of double layered moulded hot pressed plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with Jute fabric tapestry in grey colour with 1mm thick and 300 GSM and foam net in black colour with 0.9mm thick & 300GSM behind of the back. The frame shall be cantilever support made up of MS CRCA powder coated with minimum 50µ~60µ (DFT) round pipe of Dia 25.4mm with 2mm thick. The armrest shall be covered with wooden arm. There shall be PPCP shoe provided at the base to avoid scratches on the floor . The Seat size shall be 450±10mm(W) X 495±10mm(D) and back size shall be 430±10mm(H) from seat & overall height = 900±10mm. Dimensions Tolerance +/- 20 mm.

Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ. Dimensions Tolerance +/- 20 mm.

Supplying & Placing workstation in completely knock down conditions with per seat size 1200mm X 600mm X 1200mm that is to be assembled at site. The construction of the main table shall be free standing structure. The worktop shall have the size 1200mm X 600mm made up of 25mm thick PLy with laminate and sealed with 2mm thick PVC edge banding. A pullout keyboard trey shall be provided of 18mm thick Pre-lam PLy. The trey shall be operated on keyboard channel. The workstation shall be a panel based partition system of 60mm thick. The Panel on the front of the user and as well as sides of user shall be of 1200 height. Upper part of the panels to be finished with Fabric finish & Lower part of the Panel should be finished with approved laminate. Framework shall be made of aluminum alloy extrusions. All Aluminum parts shall be pretreated and duly powder coated of 40µ-50µ thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway shall be provided of aluminum below the work top as per requirement for inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminum extrusions of size 60x19mm with 1.5mm thick and should be covered with Die Cast End caps on joints, 2 ways, 3 ways & 4 ways caps as required. Wire management partition shall have concealed wire management capabilities and shall be engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cutouts shall be provided on raceways to fix all electrical and data points. Workstation with 06 module anchor roma plate with switch and socket and 02 module d-link plate with switch socket. Zinc coated small top support brackets fixed to the partition frame. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of PLy with laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized lock with one single key. A nylon castor based CPU unit shall be provided with 18mm thick Pre-lam PLy. Dimensions Tolerance ±20 mm.

Providing and supplying metal book case with an overall size 915 mm (W) X 320 mm (D) X 1750mm (H).

Supplying & Placing conference table in completely knock down conditions with an overall size 2400mm X 1200mm X 750mm that is to be assembled at site. The work top shall have the size 2400mm X 1200mm made up of 45mm thick Pre-lam Ply with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Single sided flip-up/pop-up box 01 no. shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 18mm thick Pre-lam Ply and profile shall be in linear shape with Extruded Aluminium profile shall be attached on the both side front and back side of the gable ends and bottom side appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-lam Ply of height 600mm in linear shape with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Dimensions Tolerance ±20 mm. The participating brand must have all the prevalent quality & safety related certifications like ISO: 9001, ISO:50001, ISO:14001 & ISO: 45001 by NABCB, BIFMA & SEFA Membership, AIOTA Certification, SEFA 8 and SEFA 10 Certification along with Third-Party Test Report of SEFA 8M & 10 M has to be submitted.

Supplying & Placing conference table in completely knock down conditions with an overall size 4800mm X 1200mm X 750mm that is to be assembled at site. The work top shall have the size 4800mm X 1200mm made up of 45mm thick Pre-lam Ply with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Single sided flip-up/pop-up box 01 no. shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 18mm thick Pre-lam Ply and profile shall be in linear shape with Extruded Aluminium profile shall be attached on the both side front and back side of the gable ends and bottom side appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick Pre-lam Ply of height 600mm in linear shape with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Dimensions Tolerance ±20 mm.

Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with fabric air mesh tapestry in black colour with 0.9mm thick and 300 GSM and the back shall be made of double layered moulded hot pressed plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with Jute fabric tapestry in grey colour with 1mm thick and 300 GSM and foam net in black colour with 0.9mm thick & 300GSM behind of the back. Seat and back shall be joined with HR steel powder coated sheet. The armrest shall be used PU arm adjustable type completely joint with seat. The chair shall have synchro knee tilt revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustable 100mm with BIFMA standard class-3 gaslift. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. 500±10mm(W) X 510±10mm(D) and back size shall be 490±10mm(W) & 530±10mm(H) from seat & overall height = 980±10mm. Dimensions Tolerance + 20 mm.

Supplying & placing Library Table in completely knock down conditions with an overall size 1500mm X 600mm X 750mm that is to be assembled at site. The worktop shall be made up of 25mm thick Pre-lam Ply with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The worktop shall be supplied with flapper box which have separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. The raceway or metal wire carrier shall be situated below the worktop as per requirement of inlaying the electrical management and carrying the wire horizontally. Table with 06 module anchor roma plate with switch and socket and 02 module d-link plate with switch socke. The top shall be supported on MS/CRCA rectangle pipe having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall consist of C frame MS/CRCA leg having cross-sectional area 60mm X 30mm. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. Dimensions Tolerance ±20 mm.

Supplying and placing library chair. The seat and back shall be made of injection moulded polypropylene shell. The seat shall be upholstered with high resiliance polyurethane foam 19mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick and 535GSM. The PP shell shall be supplied in perforated position and fixed with main frame. The frame structure shall be supported by four legs made up of MS/CRCA powder coated 50-60µ thick tubular pipe frame having cross-section area 25mm X 12mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 400±10 mm(D) X 410±10 mm(w) and back size sall be 455±10 mm(W) X 370±10 mm(H) from seat. Overall height shall be = 820±10 mm & overall depth = 565±10 mm. Dimensions Tolerance + 20 mm.

The book case shall be supplied with 4 nos. of individual compartments. All components shall be made of 0.8mm high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. Each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. Each door shall have plastic side end caps as handle which is easy to grip. Each compartment has a storage shelf having Uniformly Distributed Load Capacity of each shelf is 40 Kg maximum. The finish is Epoxy Polyester Powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.Dimensions Tolerance +/- 20 mm.

Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with fabric air mesh tapestry in black colour with 0.9mm thick and 300 GSM and the back shall be made of double layered moulded hot pressed plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with Jute fabric tapestry in grey colour with 1mm thick and 300 GSM and foam net in black colour with 0.9mm thick & 300GSM behind of the back. Seat and back shall be joined with HR steel powder coated sheet. The armrest shall be used PU arm adjustable type completely joint with seat. The chair shall have synchro knee tilt revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustable 100mm with BIFMA standard class-3 gaslift. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. 500±10mm(W) X 510±10mm(D) and back size shall be 490±10mm(W) & 530±10mm(H) from seat & overall height = 980±10mm. Dimensions Tolerance +/- 20 mm.

Providing, supplying and placing an open display book racks. The overall size of the rack shall be 925mm (W) X 300mm (D) X 1800mm (H). The rack shall be supplied with 4 nos. of adjustable shelves i.e. 5 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Side and top shall be covered with 18mm thick Pre-lam Ply. The edges of the board shall be sealed with 2mm thick PVC edge banding. The add-on units can be stacked width wise to form a bank of racks having common panel. Back panel up to the bottom of third rack shall have additional rigidity. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 80 kg maximum. Each rack shall be provided with stiffener at bottom for strength. Label holder & range indicators on each main unit for inserting labels. All steel components shall be epoxy polyester powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. Dimensions Tolerance +/-20 mm.

Supplying & Placing the cubicle shall be a panel based partition system of 60mm thick of 1200 height. Upper part of the panels to be finished with Fabric finish & Lower part of the Panel should be finished with approved laminate. Framework shall be made of aluminum alloy extrusions. All Aluminum parts shall be pretreated and duly powder coated of 40µ-50µ thick. All these frame work sections shall be fitted to each other by fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway shall be provided of aluminum below the work top as per requirement for inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminum extrusions of size 60x19mm with 1.5mm thick and should be covered with Die Cast End caps on joints, 2 ways, 3 ways & 4 ways caps as required. Wire management partition shall have concealed wire management capabilities and shall be engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cutouts shall be provided on raceways to fix all electrical and data points. Modular table in completely knock down conditions with an overall size 1800mm X 2100mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 1800mm X 900mm made up of 25mm thick Ply with laminate and sealed with 2mm thick PVC Edge Banding. Single sided flip-up/pop-up box shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. A pullout keyboard trey shall be provided of 18mm thick Ply with laminate with keyboard channel. The gable end shall be made up of 25mm thick Ply with laminate and profile shall be in linear shape with front full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 1200mm X 450mm X 750mm. The side unit shall be made up of Ply with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with SS handle and Multi-purpose (MP) locking mechanism. To protect

the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Ply with laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. Dimensions Tolerance ±20 mm.