Annual Rate contract for Supply of Handpump at Its Spares at Zilla Parishad Chandrapur

Amount

Handpump and its spares

32mm Nominal bore hot dipped galvanised screwed and seiected pipe in 3.00 mt length with tolerance of + 0 to (-) 25mm. Confirming to IS 1239 (Part I) 1990 Meddium Class The socket shall be manufactured from seamless pipe or machined from solid bar Confirming to grade Fe 410 - S of IS 226/1975 with a dimensions (length & Diameter) specified in IS 1239 (partll) 1982 and shall be hot dipped galvanised. One end of the riser pipe shall be fitted with hot dipped galvanised coupler and the other with thread protector. pipe supplied shoud have IS 1239 mark embossed on it. tolerance on thickness and mass galvanising, leak lightness test, bend test on tubes, chemical composition, dimensions, bend test, sampling criteria for conformity marking, protecting and packing and all other details should be followed as per IS:1239 (Note : 3 mt length of pipe willl be measured without socket) Wt per pipe should not be less than 8.5 kg per piece.

Upper valve for deep well IM II hand pump as per IS 15500(Part II) /2004.

Check valve for deep well IM II hand pump as per IS 15500(Part II) /2004

Water tank for deep well IM II hand pump as per IS 15500(Part II) /2004

Telescopic Stand for deep well IM II hand pump as per IS 15500(Part II) /2004

Sealing ring for deep well IM II hand pump as per 15500(Part II) /2004

cylinder assembly (complete unit inclusive of stainless steel plunger rod 12 mm dia with NITRILE rubber pump bucket) with upper valve assembly, lower valve assembly suitable for IM II hand pump as per IS 15500 (part II) /2004

upper valve assembly with (2nos nitrile rubber) pump bucket ,& comprising of plunger yoke body, upper valve, rubber seating, spacer & follower suitable for IM II hand pump as per IS 15500 (part II) 2004

Lower valve assembly with rubber seat retainer, rubber seating, check valve & check valve seat for deep well hand pump IM II as per IS 15500 (part II) 2004

Pump bucket ( nitrile rubber) for deep well hand pump IM II / III as per IS 15500 (part II) 2004

Hex bolt M 12 x 40 with nut M 12 as per IS1363/1984

Front cover for DW IM II HP as per IS 15500(Part II) /2004

Head for DW IM II HP as per IS 15500(Part II) /2004

Third plate for DW IM II HP as per IS 15500(Part II) /2004

Chain with coupling for DW IM II HP as per IS 15500(Part II) /2004

Handle for DW IM II HP as per IS 15500(Part II) /2004

Connecting rod 12 mm dia & 3 mtr for DW IM II HP as per IS 15500 ( part II) /2004

Rubber seating for upper valve for DW IM II HP as per IS 15500(Part II) /2004

Rubber seating for lower valve for DW IM II HP as per IS 15500(Part II) /2004

Handle axle (stainless steel) with washer and nut for deep well IM II hand pump as per IS 15500(Part II) /2004

Reducer cap for cylinder of DW IM II HP as per IS 15500(Part II) /2004

Socket 32 mm for riser pipe for DW IM II HP as per IS 1239(Part II) /1992

Rod socket 12mm for connecting rod for DW IM II HP as per IS 15500(Part II) /2004

Cylinder body with brass liner deep well IM II hand pump as per IS 15500(Part II) /2004

Plunger rod for deep well hand pump IS 9301/1990

Chain high tensile bolt M 10 x 15 x 40 with nyloc nut IS1365(Part II)

Hex-M 12 nut

Button die with holder m12 x 1-75 as as per IS 15500 (part II) 2004

Heavy duty pipe wrench 600 mm (Taparia make)

Heavy duty pipe wrench 450 mm (Taparia make)

Connecting rod combination vice T-IM II-08

Hack saw frame (300 mm)

Heavy duty 32mm NB pipe Vice as per IS 15500 (part II) 2004

Heavy duty lifter spanner for 32 mm pipe as per IS 15500 (part II) 2004

Crank spanner 17 x 19 as per IS 15500 (part II) 2004

Bearing (No.6204zz- Prepacked with lithium base grease and seated on both sides) SKF make

Handle spacer

Bolt for front cover m 12 x 1.75 x 20 mm long

ISI Marked deep well hand pump IM-II complete with accessories and with 12 nos. of connecting rod made of bright bar electro galvanized, fitted with coupler with telescoic stand assembly, Pump Head assembly, cylinder etc. recommended for use in borewells having 150 mm casing pipe as per BIS9301-1990) along with ISI G. I. pipe with one side coupler (Pls refer GI pipe specification given below) - 12nos complete H. P. Set)

Heavy duty pipe wrench 12 inch (Taparia make)

Water tank extension 1.5 feet heigst

Brass sleeve heavy class - isi Standared

Connecting rod lifter

Cutting plier pakkad (Taparia make)

Button die with holder for 32 mm G. I. pipe as as per IS 15500 (part II) 2004

Ball pan hammar with handle (1 kg Approx)

Heavy duty pipe wrench 900 mm (Taparia make)

DEEPWELL PUMPS AND ENGINEERING CO. PVT. LTD.