8131/GWL/E8 WELCOME MAINTENANCE IN SV COLONY/HATHIKHANA AND CERTAIN LOCATIONS IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

M&L for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed.

M&L for applying one coat of white wash on walls complete all as specified and directed.

M&L for Preparing of old decorated surface of ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed.

M&L for applying one coat of white wash on ceilings complete all as specified and directed.

M&L for applying two coats of white wash on walls complete all as specified and directed.

M&L for applying two coats of white wash on ceilings complete all as specified and directed.

M&L for applying one coat of cement base paint on walls complete all as specified and directed.

M&L for applying two coats of cement base paint on walls complete all as specified and directed.

M&L for applying one coat of distamper oil emulsion on walls complete all as specified and directed.

M&L for applying two coats of distemper, oil emulsion white or tinted over and including 2-3 mm thick wall care putty layer on walls complete all as specified and directed.

M&L for applying two coats of distamper oil emulsion on walls complete all as specified and directed.

M&L for prepration of old painted surfaces of wood or wood based surfaces and applying one coat of synthetic enamel paint on surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not otherwise described including preparation of old painted surfaces complete all as specified and directed.

M&L for preparing surfaces for building Nos and rewriting / repainting letters or figures (Block, Roman, Italic or Indian) of n.exc 30 cm height complete all as specified and directed.

M&L for one or more coats of french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering on brick wall or concrete surfaces in cement plaster 1:6, surface finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on brick work or concrete surfaces in cement mortar (1:4) and surface finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of exterior emulsion acyrlic weather proof antifungal paint over a coat of exterior grade primer complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and including a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and including a layer of wall care putty to get even and smooth level finish on new plastered surface of internal ceiling complete all as specified and directed.

Supply only water proofing compound (ISI Marked) complete all as specified and directed.

S&F for chicken wiremess with tack screws of galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in renewal of cutain rod of Stainless steel 20-25mm dia pipe thickness not less than 0.8mm of pipe with fixing bracket, stops, rollers, decorative end knobs etc fixed on walls with brass screws with PVC rawl plugs etc complete all as specified and directed.

S&F in renewal of Sheet glass shelf assembly front/corner consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from capacity of tanks exc 250 & n.exc 500 litres and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from capacity of tanks exc 500 & n.exc 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in renewal of PVC Lid of Water tank (ISI Marked) of any capacity PVC water tanks of any description complete all as specified and directed.

Dismantling of water tank exc 250 ltrs and n.exc 500 ltrs capacity and removing from site complete all as specified and directed.

S&F for 500 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Dismantling of water tank exc 500 ltrs and n.exc 1000 ltrs capacity and removing from site complete all as specified and directed.

S&F for 1000 ltr capacity rotational moulded polythene water storage tank two layers ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete, PVC/AC rain water / vent / waste / drain pipes) 32 mm dia to 150 mm dia including fittings complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint laid in floor or fixed to wall etc complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint laid in floor or fixed to wall etc complete all as specified and directed.

S&F for 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F for 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as complete and directed.

S&F for 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F in renewal of 20mm bore (Minimum wt 210 gms) ball /float vavle high pressure of PTMT with epoxy coated aluminium rod and high density platic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in renewal of 15mm dia Choromium Plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S& F in renewal of Spendel/phase of bib/pillar tap (41 & 42 Nos) complete all as specified and directed.

S&F in renewal of PVC conections 15mm dia for wash hand basin and low level flushing cistern of 450 mm length PTMT nuts at ends to connect pipe or sanitary fitting complete all as specified and directed.

S&F in renewal of 15 mm bore stop valve cast copper alloy screwed down high pressure with capstan head handle chromium plated any type screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in renewal of pedestal pan and tap, including connection to drain and flusing pipe and seat cover closed pattern with flat bottam, and cover and mild steel chromium plated or hinging device etc complete all as specified and directed.

S&F in renewal of PVC cabinet with shelve of size 450x600mm including mirror fixed to wall with brass cleat with shutter complete all as specified and directed.

S&F in renewal of Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in renewal of PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in renewal of flushing jet spray for pedestal pattern EWC including 1 mtr long flexible pipe and brass chromium plated nuts etc complete all as specified and directed.

S&F in renewal of stainless steel health faucet with stainless steel tube and holder etc complete all as speicified and directed

S&F in renewal of Stainless steel plate rack for utensils of size 600x750 mm and standard quality of approved make complete all as specified and directed.

S&F in renewal of brass chromium plated waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap, 32mm bore complete all as specified and directed.

S&F in renewal of 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap for cold & hot water complete all as specified and directed.

S&F in renewal of 15 mm bore, cast copper alloy chromium plated fancy type wash basin mixer tap for cold & hot water complete all as specified and directed.

S& F in renewal of pillar taps 15mm dia cast copper alloy with capstan heads, chromium plated screwed down high pressure, with lettered "Hot or Cold". With long screwed shanks and fly nuts, scrfewed for iron pipe and fixed complete all as specified and directed.

S&F in renewal of 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm125gms) complete all as specified and directed

S&F in renewal of stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connetcing union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M/s Raaj Construction Co. (BID ID -3231874)

M/s Anjali Construction (BID ID -3232813)

M/s Manish Contractor (BID ID -3230846)

M/S MAHAVIR SINGH (BID ID -3232658)

M/s KGN Builders (BID ID -3238859)

M/s J.B. Construction (BID ID -3232803)