Special Repair and Renovation including Interior Finishing of DSRS Department and Remodeling Reorientation of attached washrooms of DSRS Department at New University Campus Jammu

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12mm to 20mm in patches including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With Cement mortar 1:4 ( 1 cement : 4 sand). All work upto floor V level.

Providing and applying white cement based putty of 1.0mm thickness (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable / acrylic distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering with oil bound washable / acrylic distemper , of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or more coats on old surface

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work (Make Asian/Nerolac/Berger).

Renewing glass panes, with wooden fillets wherever necessary, Glass panes weighing 10 Kg/Sqm (4mm thick)

Providing and fixing PVC moulded beading to door and window frames with nails / screws complete of size 40 mm wide (Sample to be got approved from the Engineer -Incharge before fixing )

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood, including one coat of wood primer & then two or more coats of synthetic enamel paint of approved brand & manufacture (Make Asian/Nerolac/Berger) (Sample to be got approved from the Engineer -Incharge).

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm thick including one coat of wood primer & then two or more coats of synthetic enamel paint of approved brand & manufacture. (Make Asian/Nerolac/Berger)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 Kg/Sqm. (4 mm thick) glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. 35 mm thick shutter Second class deodar wood including one coat of wood primer & then two or more coats of synthetic enamel paint of approved brand & shade (Make Asian/Nerolac/Berger)

Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws : 35 mm thick shutter Second class deodar wood including one coat of wood primer & then two or more coats of synthetic enamel paint of approved brand & manufacture (Make Asian/Nerolac/Berger)

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :With non modular brick tiles

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase

Uprooting of rank vegetation/Plants grown on walls/roofs by way of dosmantling brick masonary/concrete, taking out of the roots and then doing the brick work and refinishing the wall including scaffolding etc. complete. All work upto floor V level. (Cost of Brick masonry & finishing shall be paid separately).

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete. 250 x 10 mm

------------do------------ 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Supply and fixing of following items including nails,screws etc complete Wire Guage

---------------do------------- Aluminum Sheet

------------do-------------- Aluminium hasp and staples 125mm

Engagement of Labour for different works Carpenter II Class

-----------do-------------- Mazdoor

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material at site and disposal of unserviceable material outside the University Campus.

Demolishing cement concrete manually/by mechanical means including disposal of material outside the University Campus. 1:3:6 or richer mix

Providing and laying cement concrete in sunken portion, retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing, centring, shuttering and finishing with 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size

Providing 40 mm thick Conc. Flooring in 1:2:4 (1 cement : 2 sand: 4 graded stone aggregate 20 mm nominal size) under tile flooring.

P/F Ist quality 300 x 300 mm size Ceramic Floor tiles (Anti Skid) of approved make (Nitco / Orient / Khajaria) & colour as required including the cost of tiles, fixing the tiles over 20mm thick base mortar 1:4 (1 cement : 4 sand), finishing the joints with white cement mixed with pigment to match the shade of tile complete. (Sample to be got approved from the Engineer -Incharge )

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 thickness to be specified by the manufacturer), of approved make, in all colours, of 300 x 450 mm size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Sample to be got approved from the Engineer -Incharge )

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation, plinth and super structure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). All work upto floor V level.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand). All work upto floor V level.

Providing and fixing G.I. pipes ( B-Class) complete with G.I. fittings and clamps, including cutting and making good the walls etc complete. (internal/ External work) (Parkash Surya /Jindal Make) 15 mm dia. nominal bore

Providing and fixing PVC trap of self cleansing design complete, including cost of cutting and making good the walls and floors : (Supreme/ Unipas/ Finolex.) 100 mm inlet and 75 mm outlet

Providing and laying PVC pipe of following dias (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground/on walls in case of Rain Water Pipe including all PVC fittings jointing with adhesive of approved make ,making good the same etc. complete. 110 mm nominal dia

--------------do---------------- 75 mm nominal dia

Providing and fixing Flat Back wash basin (Make Hind ware/Cera/Parryware) with M.S. brackets, including cutting and making good the walls wherever required. White Vitreous China Washbasin size 550 x 400 mm

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (Make Hind ware/Cera/Parryware)

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan (Make Hind ware/Cera/Parryware)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White (Make Hind ware/Cera/Parryware)

P& F CP jet with PVC pipe to be fixed with WC of approved quality.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes cutting and making good the walls and floors wherever required (Parry ware /Hind ware /Cera.)

Providing and fixing White vitreous china urinal partition of 755x165x365mm size of (Make Parryware/Hindware /Cera) make and quality

Providing and fixing GI flush pipe and C.P. brass spreader including C.P connecting single lipped urinals

Providing and fixing CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Cera Make’ 15mm nom. bore

Providing and fixing CP brass bibcock ( Short body / Long Nose) of ‘Parko/Cera Make’ 15mm nominal bore.

Providing and fixing of C. P. Pillar cock ‘Parko/Cera Make’ 15 mm (nominal size)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.(Prayag or equivalent).

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.(Prayag or equivalent).

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing uplasticized PVC connection pipe with brass unions 15 mm nominal bore with 45cm length of approved quality.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32/40 mm dia of approved quality.

P& F of CP Grating 100 mm (Circular)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal outer dia pipes.

Cleaning of manholes including clearing of drain pipes from the manhole to manhole for making the lines fully functional and disposal of mulba from the site as directed by the Engineer-in-charge.

Engagedment II Class plumber / fitter for dismanteling of serviciable sanitary fixtures & stacking them at a safe place & refixing the same. Plumber II Class

RAJ KUMAR SALGOTRA

GOPAL SINGH