ITEM NO.5 NIT NO.2

Engine : SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CCPOWER OUTPUT : 2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPMCarburetor: Diaphragm type & compensator technology.Fuel tank capacity: Should be minimum 450 ml.Dry weight( without cutting attachment ): Should not be more than 5.0 KGClutch: Clutch shoe LININING metal ONLY.Guide Bar Design: Should be Rollomatic type.Guide Bar Length: Guide bar length must have 50 cm/20" inch. Guide bar and Chain: Should have same manufacture only.Chain Type: Every drive link require groove & small oil receiver hole for better Lubrication. 0.325 inch Pitch & 1.6 mm thickness only.chain Lubrication System: Fully automatic ,speed controlled rotary oil pumpChain oil tank capacity: Should be minimum 200 ml.Oil Pump Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable.Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off.Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 m/sCertification: Product should have valid DPLF certificate with test standard EN ISO 11681.

Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compensator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certificaton

Supply of Telescopic Pole Pruner:- Specification:- Pole length incuding blade: 6.5m Blade Material: Hardened & Tempered high carbon steel .The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15"-16" Pole type: Light weight telescopic tubular aluminium alloy extendable pole No of positions for pole Height Adjustment : 10 positions Locking Mechanism : Ergonomicvally designed two way locking mechanism Total Working length : Max 21'9"(6623 mm), MIn 10'3" (3103mm) Branch cutting capacity: 200mm max

Handle Length: 13” to 17” (minimum to maximum). Total Weight: 1.5 to 2.5 pounds (including handle). Head Length: 5” to 7” (blade to butt). Head Height: 1.5” to 4” (parallel to handle). Construction: Single-piece or one-piece solid steel design.

conformity to indian standard , IS:3094-1982, Type of bill hook -Single edge Material of blade- Alloy S\steel conforming to IS 4367 latest Material of tang- Mild Steel (as per IS:226-1975) Material of Handle- Timber (as per IS:620-1975) Material of ferrule- Mile steem sheet (as per:1079-1973) Thickness of ferrule -3mm hardness of blade(as per 1500-1968) HB or HBW-400 Size of bill-hook for single and double edge type-275mm Thickness of blade-5mm Length of Handle including ferrule-150mm widht of blade-135(single edge)

Supply of Trimmer line (Nylon brush cutter wire) of good quality