Annual rate contract for operation, maintenance of electromechanical components and other works under the jurisdiction of Jal Shakti Sub Division Katra and Reasi under various M.H. such as DC, Non-plan, plan and CAPEX.

Amount

P/f of 3 core Submersible Cable 4 mm²

P/f of 3 core Submersible Cable 6 mm²

P/f of 3 core Submersible Cable 10 mm²

P/f of 3 core Submersible Cable 16 mm²

P/f of 3 core Submersible Cable 25 mm²

P/f of PVC Copper Cable 7/16

P/f of PVC Copper Cable 19/16

P/f of PVC Copper Cable 37/16

P/f of PVC Copper Cable 37/14

P/f Of PVC Copper Cable Multistrand 10 mm²

P/f of PVC Copper Cable Multistrand 16 mm²

P/f of PVC Copper Cable Multistrand 25 mm²

P/f of PVC Copper Cable Multistrand 35 mm²

P/f of PVC Copper Cable Multistrand 50 mm²

P/f of PVC Copper Cable Multistrand 70 mm²

P/f of PVC Copper Cable Multistrand 95 mm²

P/f of PVC Copper Cable Multistrand 120 mm²

P/f of PVC Copper Cable Multistrand 150mm²

P/f of Single core Aluminium Cable Armoured 50mm²

P/f of Single core Aluminium Cable Armoured 70mm²

P/f of Single core Aluminium Cable Armoured 95 mm²

P/f of Single core Aluminium Cable Armoured 120 mm²

P/f of Single core Aluminium Cable Armoured 150 mm²

P/f of Single core Aluminium Cable Armoured 185 mm²

P/f of Single core Aluminium Cable Armoured 240 mm²

P/f of Single core Aluminium Cable Armoured 300 mm²

P/f of Single core Aluminium Cable Armoured 400 mm²

P/f of Single core Aluminium Cable Armoured 500 mm²

P/f of Single core Aluminium Cable Armoured 630 mm²

P/f of 3½ core Aluminium Cable Armoured 50 mm²

P/f of 3½ core Aluminium Cable Armoured 70 mm²

P/f of 3½ core Aluminium Cable Armoured 95 mm²

P/f of 3½ core Aluminium Cable Armoured 120 mm²

P/f of 3½ core Aluminium Cable Armoured 150 mm²

P/f of 3½ core Aluminium Cable Armoured 185 mm²

P/f of 3½ core Aluminium Cable Armoured 240 mm²

P/f of 3½ core Aluminium Cable Armoured 300 mm²

P/f of 3½ core Aluminium Cable Armoured 400 mm²

P/f of 3½ core Aluminium Cable Armoured 500 mm²

P/f of 3½ core Aluminium Cable Armoured 630 mm²

P/f of Copper Thimbles 10 Amp

P/f of Copper Thimbles 16 Amp

P/f of Copper Thimbles 25 Amp

P/f of Copper Thimbles 35 Amp

P/f of Copper Thimbles 50 Amp

P/f of Copper Thimbles 70 Amp

P/f of Copper Thimbles 95 Amp

P/f of Copper Thimbles 120 Amp

P/f of Copper Thimbles 150 Amp

P/f of Copper Thimbles 185 Amp

P/f of Copper Thimbles 240 Amp

P/f of Copper Thimbles 400 Amp

P/f of Copper Thimbles 500 Amp

P/f of Copper Thimbles 630 Amp

P/f of Aluminium Thimbles 50 Amp

P/f of Aluminium Thimbles 70 Amp

P/f of Aluminium Thimbles 95 Amp

P/f of Aluminium Thimbles 120 Amp

P/f of Aluminium Thimbles 150 Amp

P/f of Aluminium Thimbles 185 Amp

P/f of Aluminium Thimbles 240 Amp

P/f of Aluminium Thimbles 300 Amp

P/f of Aluminium Thimbles 400 Amp

P/f of Aluminium Thimbles 500 Amp

P/f of Aluminium Thimbles 630 Amp

P/f of HRC Main Switch 100 Amps

P/f of HRC Main Switch 200 Amps

P/f of HRC Main Switch 320/300 Amps

P/f of HRC Main Switch 400 Amps

P/f of HRC Main Switch 630/600 Amps

P/f of HRC Main Switch 800 Amps

P/f of HRC Main Switch 1000 Amps

P/f of MCCB 25 Amps 3 Pole

P/f of MCCB 32 Amps 3 Pole

P/f of MCCB 63 Amps 3 Pole

P/f of MCCB 100 Amps 3 Pole

P/f of MCCB 125 Amps 3 Pole

P/f of MCCB 160 Amps 3 Pole

P/f of MCCB 200 Amps 3 Pole

P/f of MCCB 250 Amps 3 Pole

P/f of MCCB 400 Amps 3 Pole

P/f of MCCB 630 Amps 3 Pole

P/f of MCCB 800 Amps 3 Pole

P/f of MCCB 25 Amps 4 Pole

P/f of MCCB 32 Amps 4 Pole

P/f of MCCB 63 Amps 4 Pole

P/f of MCCB 100 Amps 4 Pole

P/f of MCCB 125 Amps 4 Pole

P/f of MCCB 160 Amps 4 Pole

P/f of MCCB 200 Amps 4 Pole

P/f of MCCB 250 Amps 4 Pole

P/f of MCCB 400 Amps 4 Pole

P/f of MCCB 630 Amps 4 Pole

P/f of MCCB 800 Amps 4 Pole

Providing/fitting of HRC Fuse set of rating 100 Amp.

Providing/fitting of HRC Fuse set of rating 200 Amp.

Providing/fitting of HRC Fuse set of rating 320/300 Amp.

Providing/fitting of HRC Fuse set of rating 400 Amp.

Providing/fitting of HRC Fuse set of rating 630 Amp.

Providing/fitting of HRC Fuse set of rating 800 Amp.

Providing/fitting of HRC Fuse set of rating 1000 Amp.

Adhesive Tape

0- 7.5 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

7.5-10 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

10- 12.5 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

12.5- 15 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

15-20 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

20-25 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

25-30 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

30-35 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

35-40 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

40- 50 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

50- 60 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

60-75 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

75-100 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

100-150 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

150-160 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

160- 200 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

200-240 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

240-300 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

300-350 HP Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

350 HP and above Induction Motor. The Job includes repairs to the Induction Motor Rotor Shaft by Turning,Finishing to size and polishing.Fabrication and fitting of CISleeves of exact size- 02 nos to end covers.P/F of Bearings of Reputed Make at DE and NDE as per sample.P/F of Nuts,Studs and bolts in place of damaged studs,nuts and bolts as per requirement.Complete assembling of Induction Motor and Testing on no load. Complete Job

Manual Carriage by Head Load of Motor/Pump from pumping station to the nearast motorable road for repair (to and fro)

for 0-7.5 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 7.5-10 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 10-12.5 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for12.5 -15 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for15-20 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for20-25 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 25-30 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 30- 35 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 35-40 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 40-50 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 50-60 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 60-75 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 75-100 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 100-150 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 150-160 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 160-200 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 200-240 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 240-300 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 300 - 350 HP

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

for 350 HP & above

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

Complete Rewinding of 0-7.5 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshop after then full load at site. Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/ reputed make) at DE and NDE as per sample

Complete Rewinding of 7.5-10 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/ reputed make) at DE and NDE as per sample

Complete Rewinding of 10-12.5 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/ reputed make) at DE and NDE as per sample

Complete Rewinding of 12.5-15 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/ reputed make) at DE and NDE as per sample

Complete Rewinding of 15-20 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 20-25 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 25-30 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 30-35 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 35-40 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 40-50 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 50-60 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 60-75 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 75-100 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 100-150 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 150-160 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 160-200 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 200-240 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 240-300 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 300-350 HP Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

Complete Rewinding of 350 HP & above Horizontal Sq. cage Motor High Speed with B/F Class insulating material and S.E copper Wire including dismantling,Varnishing,Heat Treatment for any current leakages,loading,Unloading,fitting,calibration of Panel at site,making connections,Testing on no load at workshopafter then full load at site.Also P/F of Bearings(Make- SKF/NBC/FAG/Timken/reputed make) at DE and NDE as per sample

LT Control Panel

Disconnecting of electric Power connections from damaged equipment, extracting out impaired parts and checking of fault for minor repairs. Making of temporary arrangement for running of pumping machinery for Pumping Stations/ tube wells/ dug wells for interrupted running of pumping machinery. The job includes labour charges at site.

Manual carriage of LT control panel accessories by HL from the Pumping Station to roadside ( to and fro)

Upto 250 m (to and fro)

Upto 500 m (to and fro)

Upto 1000 m (to and fro)

Upto 1500 m (to and fro)

Upto 2000 m (to and fro)

Upto 3000 m (to and fro)

P/f of Power Contractor -50 Amp (L&T, Schneider)

P/f of Power Contractor -70 Amp (L&T, Schneider make)

P/f of Power Contractor - 80 Amp (L&T, Schneider make)

P/f of Power Contractor -95 Amp (L&T, Schneider make)

P/f of Power Contractor -110 Amp (L&T, Schneider make)

P/f of Power Contractor -140 Amp (L&T, Schneider make)

P/f of Power Contractor -185 Amp (L&T, Schneider make)

P/f of Power Contractor -225 Amp (L&T, Schneider make)

P/f of Power Contractor -300 Amp (L&T, Schneider make)

P/f of Power Contractor -400 Amp (L&T, Schneider make)

P/f of Power Contractor -550 Amp (L&T, Schneider make)

P/f of over load relay for power contactor -50 Amp

P/f of over load relay for power contactor -70 Amp

P/f of over load relay for power contactor -80 Amp

P/f of over load relay for power contactor -95 Amp

P/f of over load relay for power contactor -110 Amp

P/f of over load relay for power contactor -140 Amp

P/f of over load relay for power contactor -185 Amp

P/f of over load relay for power contactor -225 Amp

P/f of over load relay for power contactor -300 Amp

P/f of over load relay for power contactor -400 Amp

P/f of over load relay for power contactor -550 Amp

P/f of Contractor coil of power contactor -50 Amp

P/f of Contractor coil of power contactor -70 Amp

P/f of Contractor coil of power contactor -80 Amp

P/f of Contractor coil of power contactor -95 Amp

P/f of Contractor coil of power contactor -110 Amp

P/f of Contractor coil of power contactor -140 Amp

P/f of Contractor coil of power contactor -185 Amp

P/f of Contractor coil of power contactor -225 Amp

P/f of Contractor coil of power contactor -300 Amp

P/f of Contractor coil of power contactor -400 Amp

P/f of Contractor coil of power contactor -550 Amp

P/f of Contractor kit of power contactor -50 Amp

P/f of Contractor kit of power contactor -70 Amp

P/f of Contractor kit of power contactor -80 Amp

P/f of Contractor kit of power contactor -95 Amp

P/f of Contractor kit of power contactor -110 Amp

P/f of Contractor kit of power contactor -140 Amp

P/f of Contractor kit of power contactor -185 Amp

P/f of Contractor kit of power contactor -225 Amp

P/f of Contractor kit of power contactor -300 Amp

P/f of Contractor kit of power contactor -400 Amp

P/f of Contractor kit of power contactor -550 Amp

P/f of single phase preventer

Providing and fitting of DOL starter 0-5 HP(Reputed Make)

Providing and fitting of DOL starter 5-10 HP(Reputed Make)

Providing and fitting of MUG starter 0-5 HP

Providing and fitting of MUG starter 5-10 HP

Providing and fitting of MUG starter 10-15 HP

Providing and fitting of MUG starter 15-20 HP

P/f of phase indicator set R/Y/B

P/f of Ampere meter (Analog) 200/5 A with CT

P/f of Ampere meter (Analog) 400/5 A with CT

P/f of Ampere meter (Digital) 200/5A with CT

P/f of Ampere meter (Digital) 400/5A with CT

P/f of Ampere meter (Digital) 600/5A with CT

P/f of Ampere meter (Analog) 600/5A with CT

P/f of Voltmeter Analog (0-500V)

P/f of Voltmeter Digital(0-500V)

Providing/fitting of under voltage relay.

Providing/fitting of over voltage relay.

Providing/fitting of over current relay.

Providing/fitting of under current relay.

Providing/fitting of Earth fault relay.

Providing/fitting of Star Delta Timer

Providing/fitting of Delay Timer

Providing/fitting of Supply Monitoring Device

Providing/fitting of Electronic Motor protection relay (digital) wit inbuilt protection of voltage and current related faults.

Providing/fitting of Fault Analyzer

Adhesive Tape

Providing/fitting of Kit Kat Fuse set of rating 100 Amp.

Providing/fitting of Kit Kat Fuse set of rating 200 Amp.

Providing/fitting of Kit Kat Fuse set of rating 250 Amp.

Providing/fitting of Kit Kat Fuse set of rating 400 Amp.

Providing/fitting of Kit Kat Fuse set of rating 630 Amp.

Providing/fitting of bus bars of rating upto 100 Amp.

Providing/fitting of bus bars of rating upto 200 Amp to 400 Amp.

Providing/fitting of bus bars of rating upto 401 Amp and above.

Repair of Star Delta Starters of capacity 25 HP/30HP by way of replacement of damaged contact points, no-load coil, contact point holders, replacement of T-oil and testing on load.

Repair of Star Delta Starters of capacity 40HP/50HP/60 HP byway of replacement of damaged contact points, no-load coil, contact point holders, replacement of T-oil and testing on load.

Repair of Star Delta Starters of capacity 80HP/100HP/125HP byway of replacement of damaged contact points, no-load coil, contact point holders, replacement of T-oil and testing on load.

Voltage Stablizer

Rewinding of copper wound coil of following capacity voltage stabilizer including dismantling of stabilizer and fitting at site after repairing are ( rate perleg/phase):_ i) 25KVA

ii)63 KVA

iii) 100KVA

iv) 150KVA

vi) 250KVA

vii) 300KVA

viii) 400KVA

ix) 630KVA

Manual Carriage by Head Load of Voltage Stabilizer from pumping station to the Workshop for repair (to and fro)

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

ii) 63-100 KVA

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

iii) 100-250 KVA

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

iv) 250- 400 KVA

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

vi) 630 KVA & above

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

P/f of Changeover Switch 63A 3Pole Panel mounted

P/f of Changeover Switch 100A 3Pole Panel mounted

P/f of Changeover Switch 125A 3Pole Panel mounted

P/f of Changeover Switch 144A 3Pole Panel mounted

P/f of Changeover Switch 160A 3Pole Panel mounted

P/f of Changeover Switch 200A 3Pole Panel mounted

P/f of Changeover Switch 300/320A 3Pole Panel mounted

P/f of Changeover Switch 400A 3Pole Panel mounted

P/f of Changeover Switch 630A 3Pole Panel mounted

P/f of Rotor Switches 5”x5”

P/f of Rotor Switches 6”x6”

P/f of Rotor Switches 8”x8”

P/f of Rotor Switches 10”x10”

P/f of Rotor Switches 12”x12”

Complete wiring job with insulator

Repair of the stabilizer tank by welding

Sundry items

Providing and Filling of Fresh Transformer/Voltage Stabilizer Oil

Transformer

Labour and carriage of material for repairing of following Transformer at site i) 63KVA Capacity

ii) 100KVA Capacity

iii) 250KVA Capacity

iv) 400KVA Capacity

v) 630KVA Capacity

Manual Carriage by Head Load of Transformer from pumping station to the road side for repair (to and fro)

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

ii) 100 KVA

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

iii) 250 KVA

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

iv) 400 KVA

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

v) 630 KVA & above

For Distance 0 m to 500 mtrs

For Distance 500m -1 km

for Distance 1 km - 2 km

for Distance 2 km - 3km

for Distance > 3 km

P/f of LT bush for 63/100VA transformer

P/f of LT bush for 200/400KVA transformer

P/f of LT Brass rod for 63 /100KVA Transformer

P/f of LT Brass rod for 250 KVA Transformer

P/f of LT Brass rod for 400 KVA Transformer

P/f of LT Brass rod for 630 KVA Transformer

P/f of HT bush for 63/100/250/400/630 KVA Transformer

P/f of aluminum HT coil for 63/100/250/630 KVA

P/f of aluminum LT coil for 63/100/250/630 KVA

P/f of Copper HT coil for 250/400/630KVA

P/f of Copper LT coil for 250/400/630KVA

Reconditioning of LT coil

P/f of gasket and other sundry items for Transformers 63 to 630 KVA

Welding to oil tank 63 to 630KVA

Painting of Transformer Body

P/f of Silica Gel Breather

Providing and Fitting of LT Terminal Plate for 63/100 KVA

Providing and Fitting of LT Terminal Plate for 250/400 KVA

Providing & fitting of Oil drain valve

Providing/fitting of lightening arrestor to electric substation

Providing/fitting of fuse set to electric substation

Providing/fitting of Link Set to electric substation

Providing/fitting of GO/DO Set to electric substation

P/f of Star Coupling Complete L-150

P/f of Star Coupling Complete L-190

P/f of Star Coupling Complete L-226

P/f of Star Coupling Complete L-290

P/f of Rubber Coupling L-150

P/f of Rubber Coupling L-190

P/f of Rubber Coupling L-226

P/f of Rubber Coupling L-290

P/f of Pin Bush Coupling 7”

P/f of Pin Bush Coupling 8”

P/f of Coupling Bolt 13 mm

P/f of Coupling Bolt 17mm

P/f of Dholki Bush 13 mm

P/f of Dholki Bush 17 mm

P/f of Gland Packing of size 8 mm at both DE and NDE along with Greasing

P/f of Gland Packing of size 10mm at both DE and NDE along with Greasing

P/f of Gland Packing of size 12 mm at both DE and NDE along with Greasing

Providing and fitting of heavy duty coupling pulley set for 0-30 HP as per sample

Providing and fitting of heavy duty coupling pulley set for 30- 60 HP as per sample

Providing and fitting of heavy duty coupling pulley set for 75-100 HP as per sample

Providing and fitting of heavy duty coupling pulley set for 100 HP &above as per sample

HC Pumpset

For 1000 GPH - 2500 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 2500- 5000 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 5000-10000 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 10000-15000 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 15000-20000 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 20000-30000 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 30000-50000 GPH

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

For 50000 GPH & above

Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage)

Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 4 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 5 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 6 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 7 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 8 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 9 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 10 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 11 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 12 stage pump)

Fabrication & fitting of new pump shaft(ASTMA A276 GR SS410) as per size and specification. ( 14 stage pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller.

Repairing of C.I Impeller.

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication & fitting of Stainless steel shaft sleeves.

Fabrication & fitting of chuck nut

Providing & Fitting of pump body casing

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing & fitting of bearing housing along with side cover plates

Providing & fitting of brass bush

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Providing and fitting of diffuser.

Fabrication & fitting of thrust plate

Providing & Fitting of Oil seal

Fabrication & fitting of gland plate with studs.

Providing & fitting of stuffing box

Providing & fitting of tie rod bolts.

Providing & Fitting Coupling bolts nuts & rubber bushes.

Providing & fitting of O Ring

Providing & fitting of Balance Key valve

Providing & fitting of Coupling key (ASTMA A276 GR SS410)

Providing & fitting of Impeller Key (ASTMA A276 GR SS410)

Providing & fitting of Sleeve Nut(RH/LH)

Providing & fitting of Stuffing Box Cover

Providing & fitting of Gland

Providing & fitting of Lantern Ring

Providing & fitting of Water thrower

Providing & fitting of Balance Valve Cover

Providing & fitting of Balance Valve Seat

Providing & fitting of Balance Valve

Providing & fitting of Stay Bar

Providing & fitting of Neck Bush

Providing & fitting of Air Cock

Providing & fitting of Delivery Casing

Providing & fitting of Suction Casing

Providing & fitting of Stage casing

Providing & fitting of Diffuser with guide vanes

Providing & fitting of Wear Ring (SUC/DEl)

Providing & fitting of Adjustable Washer-NDE

Providing & fitting of Liquid Deflector

Providing & fitting of Round Lock Nut

Providing & fitting of BRG Lock Nut

Providing & fitting of Tie Rod

Providing & fitting of Drain Plug

Providing & fitting of Grub Screws

Dismantling / fitting of Pump

Replacement of bearing - 210 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - H308 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - N309 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 204 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 205 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 206 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 207 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 307 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6212-ZZ with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6215 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6306 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6307 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6308 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6309 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6310 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6312-ZZ with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6313 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6314 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6314-C4 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - 6410 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - H307 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - N 306 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - N 307 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - NU 210 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - NU 213 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of bearing - NU 308 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of Roller bearing - 410 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of Thrust bearing - 7307 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of Thrust bearing - 7308 BG with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of Thrust bearing - 7309 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of Thrust bearing - 7311 with new one(SKF/NBC/FAG/REPUTED MAKE)

Replacement of Thrust bearing - 310 with new one(SKF/NBC/FAG/REPUTED MAKE)

Providing & fitting of 50 mm dia heavy duty ISI sluice valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 65 mm dia heavy duty ISI sluice valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 80 mm dia heavy duty ISI sluice valve C.I.(Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 100 mm dia heavy duty ISI sluice valve C.I.(Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 150 mm dia heavy duty ISI sluice valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 50 mm dia heavy duty ISI reflux valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 65 mm dia heavy duty ISI reflux valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 80 mm dia heavy duty ISI reflux valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 100 mm dia heavy duty ISI reflux valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

Providing & fitting of 150 mm dia heavy duty ISI reflux valve C.I. (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 50mm Ǿ cast steel(Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 65mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 80mm Ǿ caststeel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 100mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 125mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 150mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of Sluice Valve 200mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 50mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 65mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 80mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 100mm Ǿ caststeel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 125mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 150mm Ǿ cast steel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

P/f of NRV 200mm Ǿ caststeel (Class 300) (Kirloskar/KSB/Kartar/Zoloto)

Repairing of cast steel valve 50mm Ǿ with finishing and polishing

Repairing of cast steel valve 65mm Ǿ with finishing and polishing

Repairing of cast steel valve 80mm Ǿ with finishing and polishing

Repairing of cast steel valve 100mm Ǿ with finishing and polishing

Repairing of cast steel valve 125mm Ǿ with finishing and polishing

Repairing of cast steel valve 150mm Ǿ with finishing and polishing

Repairing of cast steel valve 200mm Ǿ with finishing and polishing

Repairing of cast steel valve 300mm Ǿ with finishing and polishing

Repairing of cast steel NRV 50mm Ǿ with finishing and polishing

Repairing of cast steel NRV 65mm Ǿ with finishing and polishing

Repairing of cast steel NRV 80mm Ǿ with finishing and polishing

Repairing of cast steel NRV 100mm Ǿ with finishing and polishing

Repairing of cast steel NRV 125mm Ǿ with finishing and polishing

Repairing of cast steel NRV 150mm Ǿ with finishing and polishing

Repairing of cast steel NRV 200mm Ǿ with finishing and polishing

Repairing of cast steel NRV 300mm Ǿ with finishing and polishing

Welding of MS/GI pipe 15 to 50mm dia to make leak proof

Welding of MS/GI pipe 65mm dia to make leak proof

Welding of MS/GI pipe 80mm dia to make leak proof

Welding of MS/GI pipe 100mm dia to make leak proof

Welding of MS/GI pipe 125mm dia to make leak proof

Welding of MS/GI pipe 150mm dia to make leak proof

Welding of MS pipe 200mm dia to make leak proof

Welding of MS pipe 300mm dia to make leak proof

Welding of MS pipe 600mm dia to make leak proof

P/f of MS flange 50mm with nut bolts

P/f of MS flange 65mm with nut bolts

P/f of MS flange 80mm with nut bolts

P/f of MS flange 100mm with nut bolts

P/f of MS flange 125mm with nut bolts

P/f of MS flange 150mm with nut bolts

P/f of MS flange 200mm with nut bolts

P/f of MS flange 300mm with nut bolts

P/f of short bend 50mm

P/f of short bend 65mm

P/f of short bend 80mm

P/f of short bend 100mm

P/f of short bend 125mm

P/f of short bend 150mm

P/f of short bend 200mm

P/f of long bend 50mm

P/f of long bend 65mm

P/f of long bend 80mm

P/f of long bend 100mm

P/f of long bend 125mm

P/f of long bend 150mm

P/f of long bend 200mm

Patch Roll

Submersible Pumpset

Repairing of Submersible Pump (V-4)

Fabrication/Providing of Coupling pulley with cotter for V-4 Submersible motor

Repairing of pump shaft by welding, turning, polishing and making key ways.

Fabrication of pump shaft as per specification (upto 5 stage)

Fabrication of pump shaft as per specification (6 stage to 10 stage)

Fabrication of pump shaft as per specification (11 stage to 15 stage)

Fabrication of pump shaft as per specification (16 stage to 20 stage)

Fabrication of pump shaft as per specification (beyond 20 stage)

Fabrication/Providing of New Impeller(CI)

Fabrication/Providing of New Impeller(Brass)

Fabrication/Providing of New PVC A-Grade Impeller with body set

Repair to impeller

Fabrication/Providing of Neck Ring

Fabrication/Providing of Body Bushes

Fabrication/Providing of Guide Bush

Fabrication/Providing of Spacer Bush

Fabrication/Providing of Cotter

Providing and fitting of body cover as per specification

Fabrication/Providing of Pump Body

Fabrication/Providing of Suction Body

fabrication & fitting of suction body bushes.

Labour charges for Dismantling & fitting of Pump (upto 5 stage)

Labour charges fo Dismantling & fitting of Pump (6 stage to 10 stage)

Labour charges fo Dismantling & fitting of Pump (11 stage to 15 stage)

Labour charges fo Dismantling & fitting of Pump (Beyond 15 stage)

Repairing of Submersible Pump (V-6)

Providing of Coupling pulley with cotter for V-6 Submersible motor

Repairing of pump shaft by welding, turning, polishing and making key ways.

Fabrication of pump shaft as per specification (upto 5 stage)

Fabrication of pump shaft as per specification (6 stage to 10 stage)

Fabrication of pump shaft as per specification (11 stage to 15 stage)

Fabrication of pump shaft as per specification (16 stage to 20 stage)

Fabrication of pump shaft as per specification (beyond 20 stage)

Fabrication/Providing of New Impeller(CI)

Fabrication/Providing of New Impeller(Brass)

Fabrication/Providing of New PVC A-Grade Impeller

Repair to impeller

Fabrication/Providing of Neck Ring

Fabrication/Providing of Body Bushes

Fabrication/Providing of Guide Bush

Fabrication/Providing of Spacer Bush

Fabrication/Providing of Cotter

Fabrication/Providing of Pump Body

Fabrication/Providing of Suction Body

Providing & fitting of suction body bush.

Providing of Bowl

Providing and fitting of bush for motor bowl

Providingand fitting of thrust pad set

Labour charges for Dismantling & fitting of Pump (upto 5 stage)

Labour charges fo Dismantling & fitting of Pump (6 stage to 10 stage)

Labour charges fo Dismantling & fitting of Pump (11 stage to 15 stage)

Labour charges fo Dismantling & fitting of Pump (Beyond 15 stage)

Repairing of Submersible Pump (V-8)

Providing of Coupling pulley with cotter for V-8 Submersible motor

Repairing of pump shaft by welding, turning, polishing and making key ways.

Fabrication of pump shaft as per specification (upto 5 stage)

Fabrication of pump shaft as per specification (6 stage to 10 stage)

Fabrication of pump shaft as per specification (11 stage to 15 stage)

Fabrication of pump shaft as per specification (16 stage to 20 stage)

Fabrication of pump shaft as per specification (beyond 20 stage)

Fabrication/Providing of New Impeller(CI)

Fabrication/Providing of New Impeller(Brass)

Fabrication/Providing of New PVC A-Grade Impeller

Repair to impeller

Fabrication/Providing of Neck Ring

Fabrication/Providing of Body Bushes

Fabrication/Providing of Guide Bush

Fabrication/Providing of Spacer Bush

Fabrication/Providing of Cotter

Fabrication/Providing of Pump Body

Fabrication/Providing of Suction Body

Providing & fitting of suction body bush.

Providing of Bowl

Providing and fitting of bush for motor bowl

Providingand fitting of thrust pad set

Labour charges for Dismantling & fitting of Pump (upto 5 stage)

Labour charges fo Dismantling & fitting of Pump (6 stage to 10 stage)

Labour charges fo Dismantling & fitting of Pump (11 stage to 15 stage)

Labour charges fo Dismantling & fitting of Pump (Beyond 15 stage)

For 2.5 inch - 4 inch dia. column pipes when number of column pipes lies in the range of 0-10,Disconnecting of power connections from starter panel,disengaging from delivery bend and extracting out submersible pump set complete along with column pipes by hoisting chain pulley block at Bore/Tube well,stacking of column pipes and submersible cable properly

For 2.5 inch - 4 inch dia. column pipes when number of column pipes lies in the range of 11-20,Disconnecting of power connections from starter panel,disengaging from delivery bend and extracting out submersible pump set complete along with column pipes by hoisting chain pulley block at Bore/Tube well,stacking of column pipes and submersible cable properly

For 2.5 inch - 4 inch dia. column pipes when number of column pipes lies in the range of 21-30,Disconnecting of power connections from starter panel,disengaging from delivery bend and extracting out submersible pump set complete along with column pipes by hoisting chain pulley block at Bore/Tube well,stacking of column pipes and submersible cable properly

For 2.5 inch to 4 inch dia. column pipes,loading of submersible pumpset in Mechanical transport,carriage to the workshop and unloading.

For 2.5 inch - 4 inch dia. column pipes, when number of column pipes lies in the range of 0-10,making of cable connection of motor with submersible cable after dressingcable ends properly.Making of each joint water proof.Lowering of Submersible pump set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts.Making of connections to the starter panel.

For 2.5 inch - 4 inch dia. column pipes, when number of column pipes lies in the range of 11-20,making of cable connection of motor with submersible cable after dressingcable ends properly.Making of each joint water proof.Lowering of Submersible pump set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts.Making of connections to the starter panel.

For 2.5 inch - 4 inch dia. column pipes, when number of column pipes lies in the range of 21-30,making of cable connection of motor with submersible cable after dressingcable ends properly.Making of each joint water proof.Lowering of Submersible pump set complete along with column pipes and submersible cable with providing & fitting of jointing material and nuts and bolts.Making of connections to the starter panel.

Rewinding of Submersible Motors along with providing & fitting of submersible cable leads, each of length 1 mtr. and of suitable specification.

Fabrication & providing of 50 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of 65 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of 80 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of 100 mm dia. flanged adaptor/adaptor with threading at other side

Fabrication & providing of MS Clamp 3"

Fabrication & providing of MS Clamp 4"

Mono Submersible Pumps

Fabrication / fitting of neck ring.

Providing & fitting of New Impeller of brass.

Providing & fitting of New Impeller of C. I

Repair of the exisitng impeller of brass

Repair of the exisitng impeller of C.I

Providing and fitting of body casing.

Providing and fitting of pump cover NDE.

For Dugwells,Disconnecting of Power Connections from Starter Panel,disengaging from delivery band and extracting out Pump set complete along with column pipes by hoisting chain pulley block.Stacking of Column pipes and cables properly

For Dugwells,Loading/Unloading/carriage to the workshop for repair and back to the Dugwell

For Dugwells,Making of cable connection of motor with cable after dressing cable ends properly.Making of each joint water proof.Lowering of Pump set complete along with column pipes and cable with providing and fitting of jointing material and nuts and bolts.Making of connections of the starter panel.

Repair 0- 2 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 3 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 5 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 7 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 8 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 10 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 12.5 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 15 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 17.5 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 20 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair 20-25 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Complete Rewinding of motors of monosubmersible pumpset

Providing and Fitting of Foot Valve 50mm Cast Iron

Providing and Fitting of Foot Valve 80mm Cast Iron

Providing and Fitting of Foot Valve 100mm Cast Iron

Providing and Fitting of Foot Valve 125mm Cast Iron

Providing and Fitting of Foot Valve 150mm Cast Iron

Providing and Fitting Standing Fan/Ceiling Fan

Providing ang Fitting of Chemical Earthing of Electromechanical machinery(Transformers/Motors/LT Panels/Volatge stabilizers) by way of digging of pit approximately 2Mtr and providing and fitting of copper electrode with chemical material and Providing and laying of Aluminium strip with proper nut-bolts. Complete job

Fabrication and prviding of Tripod stand made up of 12-15 ft, 3 inches GI pipe with hook on Top for removal of Submersible/Monoblocs

Electric Heater with copper wire of 1.5 sqmm having length 10 mtrs

Providing of Grease(Reputed make)

Providing of M-oil

Rubber Sheet

Leather Sheet

MS Nut bolt and washers

P/f of LED flood light 30-50 Watt

P/f of LED flood light 100 Watt

P/f of LED bulb 9/10watt

Tool- tackles of following size

Plier

Spanner Set

Pipe Wrench 14 inch

Pipe Wrench 18 inch

Pipe Wrench 24 inch

Sly wrench

Screw Driver small/large

Crow bar

Hammer with handle

Pick axes

chisel

Ring spanner 16 to 32

L key Set

Welding Set

Chain block 3Ton of reputed make

Supplying of Skilled Labour (Electrician/Mason/Welder/Fitter)

Supplying of Semi-Skilled labour

Supplying of Un-Skilled labour

Hiring of tractor/trolley for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shall be provided by the contractor

Hiring ofwater tanker for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shall be provided by the contractor

Hiring of tractor/trolley for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shal be provided by the departement

Hiring ofwater tanker for distribution of potable drinking water to uncovered area/partially covered area/ failure of water supply under the jurisdiction of this division. Fuel/POL shal be provided by the departement

Hiring of Light Motor Vehicle for carriage of goods/mechanics Fuel/POL shall be provided by the departement

Hiring of Light Motor Vehicle for carriage of goods/mechanics Fuel/POL shall be provided by the contractor

Providing and fixing MS. pipes complete with MS. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore

Providing and fixing MS pipes complete with MS fittings excluding trenching and refilling etc. (external work) 125 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 150 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 200 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 250 mm dia. nominal bore

Providing and fixing MS. pipes complete with MS fittings excluding trenching and refilling etc. (external work) 300 mm dia. nominal bore

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Hard rock without blasting

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Extra rates for quantities of works executed : In or under water and/ or liquid mud, including pumping out water as required

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

DAMP PROOF COURSE Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Extra for concrete work in superstructure above floor five level for each four floors or part thereof.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 15 and 20mm dia pipes all class

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 25 mm and 32 mm dia. G.I. pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 40 mm and 50 mm dia. G.I. pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 65 mm and 80 mm dia. G.I. pipes

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm and 150 mm dia. G.I. pipes

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 25 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 32 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 50 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 65 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 150 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 100 mm nominal bore

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 80 mm dia.

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm dia.

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 125 mm dia.

Laying and fitting of MS. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 150 mm dia.

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 200 mm

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 250 mm

Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 300 mm

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 20mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 32mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 40mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 50mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 65mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 80mm dia

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 100 mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 20mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 32mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 40mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 50mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 65mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 80mm dia

Providing and fixing G.I. Elbow in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 100 mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 15mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 20mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 32mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 40mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 50mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 65mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 80mm dia

Providing and fixing G.I. Socket in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 100 mm dia

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 40 mm nominal bore and above.

Dismantling MS. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 40 mm nominal bore to 65 mm.

Dismantling MS. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 65 mm nominal bore to 100mm.

Dismantling MS. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : 100 mm nominal bore and above.

Carraige of MS/GI Pipes by HL in Aadhkwari Sector by HL

Carraige of material i.e. Sand/aggregate/pipes/cement and other items by MT on SMVDSB Track by tractor

Carraige of material i.e. Sand/aggregate/pipes/cement and other items by MT on SMVDSB Track by mahindra pick up

Carraige of MS/GI Pipes by HL in Bhawan Sector by HL

Carraige of cement by HL in Bhawan Sector by HL

Carraige of cement by HL in Aadhkwari Sector by HL

Carraige of sand by HL in Bhawan Sector by HL

Carraige of sand by HL in Aadhkwari Sector by HL

Carraige of aggregate by HL in Bhawan Sector by HL

Carraige of cement by pony in Bhawan/aadhkwari Sector

Carraige of sand/aggregate by pony in Bhawan/aadhkwari Sector

Carraige of aggregate by HL in Aadhkwari Sector by HL

GK electrical Engg. works (BID ID -2468669)

Chenab Infrastructure Pvt. Ltd. (BID ID -2468867)