GE/ALP (8574) KOLKATA OF 2025-26

Amount

Chair Writing (Drg No FD-20/280) :- Supply & Fixing for new components made of Ist class teak wood for Rear leg of Chair writing, all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed.

Front leg made out of 1st class heartwood (Teak)

Seat side rail made out of 1st class hardwood (Teak)including drilling holes for canning

Rear rail made out of 1st class hardwood (Teak) including drilling holes for canning

Front rail including drilling holes for canning

Side/ centre stiffner made out of 1st class heartwood(Teak)

Back rest made out of 1st class hardwood (Teak)

Arm rest made out of 1st class heartwood (Teak)

PVC hard rubber shoe of approved quality

Chair Easy (Drg No FD-17/201/229) :- Supply & Fixing for new components made of Ist class teak wood for Rear leg of Chair Easy, all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed.

Front leg made out of 1st class hardwood (Teak)

Seat side rail made out of 1st class heartwood (Teak) including drilling holes for canning

Seat front frame made out of 1st class hardwood (Teak) including drilling holes for canning

Seat rear frame made out of 1st class heartwood (Teak) includinng drilling holes for canning

Rear/ front rail under seat made out of 1st class hardwood (Teak)

Back frame made out of 1st class heartwood (Teak)including drilling holes for canning

Back bottom frame made out of 1st class hardwood (Teak) including drlling holes for canning

Back side frame made out of 1st class heartwood(Teak)

Wooden member (size 20x15mm) screwed to side frame including drilling holes for canning

Arm rest made out of 1st class heartwood (Teak)

PVC hard rubber shoe of approved quality

Chair Dinning (Drg No FD-16/203/279) :- Supply & Fixing of new components made of Ist class teak wood for Rear leg of Chair Dinning, all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed.

Front leg made out of 1st class heartwood(Teak)

Back rest made out of 1st class heartwood (Teak)

Seat side rail made out of 1st class hardwood (Teak)including drilling holes for canning

Front rail made out of 1st class heartwood (Teak)including drilling holes for canning

Rear rail made out of 1st class hardwood (Teak) including drilling holes for canning

Side/ centre stiffner made out of 1st class heartwood(Teak)

PVC hard rubber shoe of approved quality

Chair Wooden Bottom (Drg No FD-56/225/285/286) :- Supply & Fixing of new components made of Ist class teak wood for Rear leg of Chair Wooden Bottom , all joints to be fixed with bamboo pins, wooden screws, fevicol and wooden putty wherever required including dismantling of aforesaid unserviceable components carefully without distrubing the adjoining parts complete all as specified and as directed.

Front leg made out of 1st class heartwood(Teak)

Seat side Rail made out of 1st class heartwood (Teak)

Front rail made out of 1st class heartwood (Teak)

Seat Rear Rail made out of 1st class heartwood (Teak)

Side/centre Stiffner made out of 1st class heartwood(Teak)

Back Rest made out of 1st class heartwood (Teak)

6mm Thick BWR ply duly fixed on seat with 75mm dia screws including 6mm dia performations at centre of circular partern.

PVC hard rubber shoe of approved quality

Chair Dining JCO/ORs PVC Seat (FD/E6/MAP-II/05) :- Supply & Fixing of new components made of Ist class teak wood for Rear leg of Chair Dining Plastic Seat, all joints to be fixed with bamboo pins, wooden screws, fevicol and wooden putty wherever required including dismantling of aforesaid unserviceable components carefully without distrubing the adjoining parts complete all as specified and as directed.

Front leg made out of 1st class heartwood (Teak)

Seat side Rail made out of 1st class heartwood (Teak)

Front rail made out of 1st class heartwood (Teak)

Side/centre Stiffner made out of 1st class heartwood (Teak)

Rear Rail made out of 1st Class heartwood (Teak)

Back Rest made out of 1st class heartwood (Teak)

PVC Seat 4MM Thick with holes & screwed with frame

PVC hard rubber shoe of approved quality

Bed Plywood Top (Drg No FD-21/246) :- Supply and fixing for 12mm thick BWR Grade-I ply of size 6'.3"x3' for Bed plywood top, duly fixed with screws with carpentry joints in tact tighty fixed with glue, fevicol, bamboo pins etc and polish repair part to match with rest of the item by removing unserviceable components as directed.

Head board frame of bed with 4mm thick BWR grade OST Ply (approved brand) on both side by providing TW beading all around

Foot board frame of bed with 4mm BWR grade OST Ply (approved brand) on both side by providing TW beading all ground.

1st class TW long rail of size (100x35x1980)mm

1st class TW base stiffner 40x60x900mm to ply support

1st class TW support stiffner at Foot/ Head board of size (60x60x900)mm

1st class TW frame over battens at Foot/ Head board of size (30x60x900)mm

1st class TW legs of size (60x60x660)mm

Canning :- Supply & Fixing for caneing with approved shade of plastic cane of 2 mm wide, 0.5 thick half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after with and including removing of wornout unserviceable cane for Chair dining / Chair CB'B' Wooden complete all as specified and as directed. Note : Ref drawing No FD- 16/203/228/279

Chair easy (seat) Note : Ref drawing No FD-17/201/229

Chair easy (back) Note : Ref drawing No FD-17/201/229

Chair writing Ref drawing No FD-20/202/250/280

Stool dressing Ref drawing No FD-27/282

Polishing :- Material & Labour for applying polish to obtain glossy finish including preparation of polished surface by removing and cleaning of existing polish with the sand paper and fill the surface with Bee wax putty for making the surface for Book Case complete all as specified and as directed Note : Ref drawing No FD-45/237

Bed Hard Ref drawing No FD-21/246

Stool dressing Note : Ref drawing No FD-27/282

Bin soiled linen Ref drawing No FD-212/252

Hat Stand with mirror Ref drawing No FD-23/233

Peg Table Ref drawing No FD-25/236/277/384

Table 900 x 600 mm with drawer Ref drawing No FD-283

Table 900 x 600 mm w/o drawer Ref drawing No FD-42/55/284

Table 1200 x 900 x 760 mm Ref drawing No FD-291 & FD/MAP-II/03

Table 900 x 900 x 760 mm Ref drawing No FD-224, 283

Table dining for 6 or 8 persons Ref drawing No FD-30/239/273/376, FD/MAP-II/03

Table writing Ref drawing No FD-33/249/275

Table dressing gents Ref drawing No FD-31/230/379

Table dressing ladies Ref drawing No FD-32/251/378

Table center Ref drawing No FD-29/235/274

Side Board Ref drawing No FD-26/241/372/1112

Teapoy Ref drawing No FD-34/232/278/382

Chair dinning Ref drawing No FD-279,203,228,16

Chair easy Ref drawing No FD-201,229,17

Chair writing Ref drawing No FD- 20,202,250,280

Chair wooden bottom . Ref drawing No FD-56/225/285/286

Sofa Set 5 Seater (3+1+1) Ref drawing No 281

Sofa Set 4 Seater (2+1+1) Ref drawing No 281

Table Bed Side Ref drawing No 276, FD/E6/MAP/15(R)

Bin Soiled Multipurpose Ref drawing No FD/E6/MAP/9

Chair Dining Officers Ref drawing No FD/E6 /MAP-13

Table Writing (Drg No -FD-27, 249, 33(M) Supply and fixing for Leg (size 50x35x760 mm) of Table Writing Table Writing out of 1st class heartwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items complete all as specified and as directed.

M&L removal of unserviceable top of Table witing in any position and S & F new table top made of 18mm thick MDF exterior grade, lamination (colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

All as per item No 9 here in before but Centre stiffener (size 50x25x1145 mm) of Table Writing.

All as per item No 9 here in before but Side stiffener (size 20x50x600 mm) of Table Writing .

All as per item No 9 here in before but 25mm wide stainlees steel Piano hinge for shutter of Table Writing.

All as per item No 9 here in before but of 18/19 mm thick Pre-laminated MDF board exterior grade door shutter with TW beading of Table Writing

All as per item No 9 here in before but 6 mm thick ply wood for base of drawer of Table Writing.

All as per item No 9 here in before but 12 mm thick Teak Wood side plank for drawer of Table Writing

All as per item No 9 here in before Top rail made out of 1st Class Heartwood (Teak)

All as per item No 9 here in before Side rail made out of 1st Class Heartwood(Teak)

All as per item No 9 here in before Long and Short rail made out of 1st Class Heartwood (Teak)

Table 900x900x760mm (Drg No -FD-224, 283) Supply and fixing for Leg (size 60x30x760 mm ) of Table ( size 900x900x760mm mm)out of 1st class hardwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items complete all as specified and as directed.

M&L removal of unserviceable top of Table (900x900x760mm) in any position and S & F new table top made of 18mm thick MDF board exterior grade, lamination colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed..

Side Rail made out of 1st class hardwood (teak)

S & F 1st Class teak wood bracket as per suitable size triangular (08 Nos in a Table) fixed with screws complete all as specified.

PVC / Hard Rubber shoe of approved quality

Table 900x600x760mm with/without Drawer (Drg No -FD-41,42,241,223,283,284) Supply and fixing for Leg of Table ( size 900x600x760mm mm)out of 1st class hardwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items complete all as specified and as directed.

M&L removal of unserviceable top of Table (900x600x760mm) in any position and S & F new table top made of 18mm thick MDF board exterior grade, lamination (colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Long Side Rail made out of 1st Class heartwood (teak)

Short Side Rail made out of 1st class heartwood (teak)

All as per item No 11 here in before but 12 mm thick Teak Wood as side plank of drawer of Table (size 900x600mm) with or with out drawer

All as per item No 11 here in before but 6 mm thick ply top for base of drawer of Table (size 900x600 mm) with or with out drawer

S & F 1st Class teak wood bracket as per suitable size triangular (08 Nos in a Table) fixed with screws complete all as specified.

PVC / Hard Rubber shoe of approved quality

Table 1200x900x760mm (Drg No -FD-291 & FD/MAP-II/03) Supply and fixing for Leg of Table ( size 1200x900x760mm) out of 1st class hardwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items complete all as specified and as directed.

M&L removal of unserviceable top of Table ( size 1200x900x760mm) in any position and S & F new table top made of 18mm thick MDF board exterior grade, lamination (colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Long Side Rail made out of 1st Class heartwood (teak)

Short Side Rail made out of 1st class heartwood (teak)

S & F 1st Class teak wood bracket as per suitable size triangular (08 Nos in a Table) fixed with screws complete all as specified.

PVC Hard Rubber shoe of approved quality

Table Dining 6 Persons (Drg No FD-239, 273) Supply and fixing for Leg of Table Dining 6 Persons out of 1st class heartwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items complete all as specified and as directed.

M&L removal of unserviceable top of Table Dining 6 Persons in any position and S & F new table top made of 18mm thick MDF exterior grade, lamination colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

All as per item No 13 here in before but Long Side Rail made out of 1st Class heartwood (teak)

All as per item No 13 here in before but Short Side Rail made out of 1st class heartwood (teak)

S & F 1st Class teak wood bracket as per suitable size triangular (08 Nos in a Table) fixed with screws complete all as specified.

All as per item No 13 here in before but Middle stiffener (size 100x25x900 mm) of Table dining 6 pers. Note : Ref drawing No FD-273

PVC / Hard Rubber shoe of approved quality

Table Dining 8 Persons (Drg No FD-239, 273) Supply and fixing for Leg of Table Dining 8 Persons out of 1st class heartwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items complete all as specified and as directed.

M&L removal of unserviceable top of Table Dining 8 Persons in any position and S & F new table top made of 18mm thick MDF board exterior grade, lamination (colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

All as per item No 14 here in before but Long Side Rail made out of 1st Class heartwood (teak)

All as per item No 14 here in before but Short Side Rail made out of 1st class heartwood (teak)

S & F 1st Class teak wood bracket as per suitable size triangular (08 Nos in a Table) fixed with screws complete all as specified.

All as per item No 14 here in before but Middle stiffener (size 100x25x900 mm) of Table dining 8 pers.

PVC Hard Rubber shoe of approved quality

Table Dressing Gents (Drg No FD-230) :- Supply and fixing for 5 mm thick mirror of size 380x760 mm including tightening frame components with wooden pin of Table dressing gents including removal of old part carefully without disturbing of adjoining part. Make : Modi/Saint globin/Atul

All as per item No 15 here in before but 6mm thick BWR grade type 'BB' Ply wood as back side of mirror including tightening of all loose components of Table dressing gents

All as per item No 15 here in before but 12 mm thick Ist class Teak Wood as drawer and 6 mm thick BWR grade type 'BB' ply wood for its bottom of Table dressing gents

All as per item No 15 here in before but 18/19 mm thick pre-laminated MDF board exterior grade(OSL) as side/top including 3 mm Teak Wood beading alround and polished the same to match the existing. of Table dressing gents.

Table Dressing Ladies (Drg No FD-32/251/378) :- Supply and fixing for but 5mm thick mirror of size (366 x 1220) mm including tightening frame components with wooden pin of Table dressing ladies including removal of old part carefully without disturbing of adjoining part. Make : Modi/Saint globin/Atul or best equivalent brand as aproved by GE

All as per item No 16 here in before but 6mm thick BWR grade type 'BB' Ply wood as back side of mirror including tightening of all loose components of Table dressing ladies

All as per item No 16 here in before but 12 mm thick Ist class Teak Wood as drawer and 6 mm thick BWR grade type 'BB' ply wood for its bottom of Table dressing ladies

All as per item No 16 here in before but Glazed sliding shutter with 4 mm thick glass in front of Aluminum channel and made smooth for its movement of Table dressing ladies

All as per item No 16 here in before but 18/19 mm thick pre-laminated MDF board exterior grade (OSL) as side/top including 4 mm Teak Wood beading alround and polished the same to match with the existing of Table dressing ladies.

Side Board (Drg No FD-26/241) :- Supply and fixing for leg (size 45x45x144 mm) of Side Board including removal of old part carefully without disturbing of adjoining part.

All as per item No 17 here in before but base side stiffiner (size 25x25X455 mm) of Side Board

All as per item No 17 here in before but base front stiffiner (size 25x45x1020 mm) of Side Board

All as per item No 17 here in before but 6mm thick BWR grade type 'BB' Ply wood as back side of size (1220 x 760)mm of Side Board

All as per item No 17 here in beforee but 18/19 mm thick Pre-laminated MDF board exterior grade (OSL) as side of size (455 x 760) mm of Side Board

All as per item No 17 here in before but 18/19 mm thick Pre-laminated MDF board exterior grade (OSL) as top of size (1220 x 455) mm of Side Board

All as per item No 17 here in before but 18/19 mm thick Pre-laminated MDF board exterior grade (OSL) as shutter of size (635 x 418) mm of Side Board

All as per item No 17 here in before but 6mm thick BWR grade type 'BB' Ply wood as base of drawer of size (455 x 385)mm of Side Board

All as per item No 17 here in before but Wooden bearer (size 19x19x455 mm) for sliding of drawer of Side Board

All as per item No 17 here in before but Shutter lock with keys (4 lever) of approved brand of Side Board

All as per item No 17 here in before but 25mm wide stainless steel Piano hinge for shutter of Side Board

Book Case (Drg No FD-45/237) :- Supply and fixing for Base legs (size 45x45x100 mm) of Book case including removal of old part carefully without disturbing of adjoining part.

All as per item No 18 here in before but Base side rail (Size 40x25x200 mm) of Book case

All as per item No 18 here in before but Base front rail (size 40x25x900 mm) of Book case

All as per item No 18 here in before but 6 mm thick BWR grade type 'BB' Ply wood as back side of size 1200 x 660mm of Book case

All as per item No 18 here in before but 18/19 mm thick Pre-laminated MDF board exterior grade (OSL) as shutter of size 380 x 660 mm of Book Case.

All as per item No 18 here in before but 3 mm thick, 18mm wide Teak Wood edging alround the Book Case

All as per item No 18 here in before but 18mm wide stainless steel Piano hinge for shutter of Book Case

All as per item No 18 here in before but 18mm thick one side teak veneered BWR grade type 'BB' Ply wood as side cover of size 300 x 660mm of Book Case Ref drawing No FD-45/237

Table Dressing Ladies (Drg No FD/E6/MAP-II/07) M & L for care fully dismantling the damaged worn-out i.e top of Table dressing ladies and replacing the same with new top /bottom mase out of 18 mm thick MDF board extr grade of reqd. Size , front side shall be fixed with 4 mm thick teak wood edging complete all as specified and as directed.

As per item No 19 here in before but sides for table dressing ladies (MAP), made out of 18 mm pre-laminated MDF board (OSD) extr gd, front side shall be fixed with 4 mm thick TW edging .

As per item No 19 here in before but shutter for table dressing ladies (MAP), made out of 18 mm pre-laminated MDF board (OSD) extr gd, front side shall be fixed with 4 mm thick TW edging fixed all-round the shutter and fixed with hinges as specified and shown on drg.

All as per item No 19 here in before but drawer for table dressing ladies (MAP), made out of 18 mm pre-laminated MDF board (OSD) extr gd, front side and 12 mm thick BWR plywood for two sides and back of drawer , 6 mm thick BWR plywood shall be provided for bottom of drawer complete all as specified and shown on drg.

All as per item No 19 here in before but CP handle 50 mm long match with outer existing handle of Table dressing ladies (MAP) FIXED WITH screw nut and bolt complete all as specified and shown on drg.

All as per item No 19 here in before but mirror for Table dressing ladies (MAP) of 5 mm electro copper plated with mirror frame as shown drg complete. Make : Atul/ Sentglobin/ or equal brand.

All as per item No 19 here in before but back ply of mirror frame Table dressing ladies (MAP) made out of 6 mm thick BWR plywood as specified and shown on drg.

All as per item No 19 here in before but back for wheel for bottom of stool for table dressing ladies made out of 50 mm dia heavy duty revolving wheel shall be fixed at the bottom of stool all as specified and shown on drg.

All as per item No 19 here in before but cushion for stool of Table dressing ladies made out of Foam 75 mm thick density 40 duly covered with approval tapestry cloth complete all as specified and shown on drg.

All as per item No 19 here in before but lid ( base for cushion) made out of 12 mm BWR plywood with one steel handle complete as shown on drg.

Table Dressing Gents (Drg No FD/E6/MP/16) Supply & Fixing for care fully dismantling the damaged worn-out i.e side of the frame of Table dressing Gents (MAP) made out of 18 mm thick MDF board extr grade fixed with 4 mm TW edging of front side complete all as specified and shown on drg, and directed.

All as per item No 20 here in before but for top /bottom of Table Dressing Gents made out of 18 mm Pre-laminated MDF board extr grade, fixed with 4 mm TW edging for front side of top/bottom complete as complete all as specified and shown on drg

All as per item No 20 here in before but mirror 5 mm thick electro copper coated for Table Dressing Gents arter with and including taking down existing unserviceable broken mirror complete as complete all as specified and shown on drg Make : Atul/ Sentglobin/ or equivalent make as approved by GE

All as per item No 20 here in before but 6 mm thick BWR ply for back of mirror of Table dressing Gents after with and including taking down existing unserviceable ply complete all as specified and shown on drg

Sofa Set 4/5 Seater (Drg No FD-281) Supply & fixing for Cushion covers duly stitched with zip Sofa set 4 / 5 seater after with and including taking down of the existing unserviceable one complete all as specified and as directed. Note :-Cost of cloth should not be less than Rs 300 RM.

All as per item No 21 here in before but Foam cool density 40 of size 21"x22"x100 mm thick duly covered with white marking cloth and stiched all sides complete all as specified and as directed. Make : Kurlon or Sleepwell or equivalent make as approved by GE Ref drawing No FD-281

Suppy & Fixing of Front leg made out of 1st class hardwood (Teak) including dismantling of unserviceable leg without disturbing the adjoining parts.

Suppy & Fixing of Rear leg made out of 1st class hardwood (Teak) including dismantling of unserviceable leg without disturbing the adjoining parts.

All as per item No 21 here in before but Front rail made out of 1st class heartwood (Teak)

All as per item No 21 here in before but Seat Stiffner made out of 1st class heartwood (Teak)

All as per item No 21 here in beforebut Back Strip made out of 1st class heartwood (Teak)

All as per item No 21 here in before but Arm Rest made out of 1st class heartwood (Teak)

Chair Dining Officers (FD/MAP-II/04) Supply & fixing for Cushion covers duly stitched with zip Chair Dining Officer after with and including taking down of the existing unserviceable one complete all as specified and as directed. Note: Cost of cloth should not be less than Rs 280 RM

All as per item No 22 here in before but Foam cool density 40 cushion having thickness 75mm duly covered with white marking cloth and stiched all sides for Chair Dining Officers, complete all as specified and as directed. Make : Kurlon or Sleepwell or equivalent make as approved by GE Note: Ref drawing No FD-281

M & L removal of unserviceable ply of chair and Supply & Fixing of 6mm Thick BWR ply duly fixed on seat

Suppy & Fixing of Front leg made out of 1st class hardwood (Teak) including dismantling of unserviceable leg without disturbing the adjoining parts.

Suppy & Fixing of Rear leg made out of 1st class hardwood (Teak) ncluding dismantling of unserviceable leg without disturbing the adjoining parts.

Back Strip made out of 1st class heartwood (Teak)

Hat Stand with Mirror (Drg No FD-233/361) Removing of old damaged mirror and S & F new mirror of 5 to 5.5mm thick mirror as per drg or as directed

Removing of old damaged back side ply and S&F new back side ply 6mm thick BWR quality as per drg or as directed

Removing of old damaged front ply and S&F new front ply 4mm thick BWR quality one side teak face as per drg or as directed

Removing of old damaged hooks and S&F new brass hooks to Hat Stand and all as per drg or as directed

Removing broken/unserviceable hanging clip and S &F new MS hanging clips as per suitable size and fix with screw rest all specified

Peg Table (Drg No FD-277) S & F for Leg (size 30x50x380mm) for Peg Table made out of 1st class hardwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed.

M&L removal of unserviceable top of peg table in any position and S & F new table top made of 18mm thick MDF exterior grade, lamination (colour/shed as approved) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Top rail (shorter) made out of 1st Class Heartdwood (teak)

Top rail (longer) made out of 1st Class Heartdwood (teak)

Stiffner of Peg Table made out of 1st Class Heartdwood (teak)

PVC Hard Rubber shoe of approved quality

Table Centre (Drg No FD-29M, FD-235 & FD-274) S & F for Leg (size 60 x 30x 400mm) for Table Center made out of 1st class hardwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed.

M & L removal of unserviceable top of table centre in any position and S & F new table top made of 18mm thick MDF board exterior grade, lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Top rail (shorter) made out of 1st Class Hardwood (teak)

Top rail (longer) made out of 1st Class Hardwood (teak)

Stiffner (Size 50x20x450mm) of Table Center made out of 1st Class Hardwood (teak)

PVC Hard Rubber shoe of approved quality

Teapoy FD (Drg No : 278, 232, 34(M) S & F for Leg (size 60 x 30x540mm) for Teapoy made out of 1st class hardwood (Teak) including dismantling of unserviceable components of furniture items without disturbing the adjoining parts and polish the replaced parts to match with rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed.

M & L removal of unserviceable top of teapoy in any position and S & F new table top made of 18mm thick MDF board exterior grade, lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed.

Top rail (shorter) made out of 1st Class Hardwood (teak)

Top rail (longer) made out of 1st Class Hardwood (teak)

PVC Hard Rubber shoe of approved quality

Supply and fixing as in repair 40mm dia Chromium plated Knobs for shutter & drawer for Side Board, Dressing gents/ladies, Table writing, Book Case & Table (3'x2') with drawer complete all as specified and as directed. Note : Ref drawing No FD-241/275/230/251/378/

RADHA ENTERPRISE (BID ID -3482724)

ARISTO STEEL FURNITURE WORKS (BID ID -3483330)

BENGAL TRADERS (BID ID -3482632)

Tirupati Buildcon Pvt. Ltd. (BID ID -3484054)

SPECIAL CONCRETE AND CONSTRUCTION CO. (BID ID -3481669)

B N ENTERPRISE (BID ID -3485745)