REPAIR MAINT OF FLOORING, HARDSTANDING AND ROOF REPAIR ETC IN THE AREA OF AGE BR-II UNDER GE FAIZABAD

Amount

Taking down cement or cement lime plaster on brick / stone walls, ceiling incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete work as in ceiling, finished fair and even complete all as specified and directed.

Dubbing out average 10mm thick in cement mortar (1:6) on irregular faces of walls or concrete, chajjas etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion after providing a layer of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge.

M&L of preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as direceted.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

Demolition of cement concrete of any descrption and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for machine cut Kota stone slab 18-22mm thick, laid over and including 15mm thick screed bed in cement mortar (1:6) in flooring, set and jointed with grey cement slurry and pointed in neat grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut Kota stone slab 18-22mm thick as in riser of steps, skirting, dado and pillars etc, laid over and including 10mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in neat grey cement mixed pigment to match the smooth of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L for 7 to 8 mm thick (square/ rectangular) non skid joint free coloured ceramic floor tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, laid in flooring over and dincluding 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed with coloured cement with pigment to match the colour of tiles, complete all as specified and directed by Engr-in-Charge.

All as per Sl item No. 15.00 above but in vertical surfaces of walls such as dados, skirting etc, laid over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified & directed..

M&L for 7 to 8 mm thick (square/ rectangular) non skid joint free coloured ceramic floor tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, laid in flooring over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed with coloured cement with pigment to match the colour of tiles, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles 300X450X7mm thick in vertical surfaces over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for vertified ceramic tiles 10 mm thick dark shade (square/rectangular), polished area of each tiles not exceeding0.36 Sqm, laid in flooring over and dincluding 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed with coloured cement with pigment to match the colour of tiles, complete all as specified and directed by Engr-in-Charge.

All as per Sl item No. 19.00 above but in vertical surfaces of walls such as dados, skirting etc, laid over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat slurry and pointed in white or coloured cement to match complete all as specified & directed..

M&L for 25mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 40mm thick cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 100mm thick cement concrete (1:4:8) type D2 (using 40mm graded aggregate) as in sub base and the like completed al; as specified and directed by the Engr-in-Charge.

M&L for machine pressed 80mm thick precast coloured concrete interlocking paver block of any shape and size, made of cement concrete M-45 Grade, conforming to IS-15658-2006 with grey cement and pigment, laid over sand cushioning complete all specified and directed. Note: Sand for cushioning shall be measured and paid for separately against respective item of Schedule 'A'.

M&L sand filling under floors, cushioning for laying interlocking paver blocks or in foundations including watering and consolidation complete all as specified and directed.

M&L for 20mm thick black granite on kitchen platform and similar work, laid over and including 15mm thick screed bed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in alternate bays n.exc 2 Sqm each, finished fair & even lcomplete all as specified and directed.

M&L for providing precast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in kerbs stone (75mm thick) or mud stops, rounded or chamfered on edges, fixed in position & set in cement mortar (1:4) including necessary excavation as required & removal of spoil to a distance n.exc 50 m complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement, using extra cement including forms, moulds, mitred / stoped ends etc complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork or stone boulder masonary built in cement mortar or cement lime mortar including all quins, arches, pillars etc complete all as specified and directed by Engr-in-Charge..

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc. 6m mean radius complete all as specified and directed by Engr-in-Charge.

Dismantling of existing unserviceable water sorage tank of any description, capacity exc 250 Ltr but n.exc 500 ltrs and removal from site and S&F new rotational moulded (HDPE) water storage tank of 500 litre capacity, hoisted & fixed in position all as specified in SSR Part-I and directed by Engineer-in-Charge.

Disconnecting existing water storage tank of capacity exc 250 but n.exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning and hoisting (if required) and re-fixing in position including re-connecting inlet & outlet pipes complete all as specified and directed.

S&F in repairs, 20mm dia bore gun metal globe or gate valve, wheel head cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, ISI marked complete all as specified and directed.

S&F in repairs, 25mm dia bore gun metal globe or gate valve, wheel head cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, ISI marked complete all as specified and directed.

S&F in repair, 20 mm bore PTMT ball valve (Minmum weight 210 gms), high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

S&F in repair, 25 mm bore PTMT ball valve (Minmum weight 455 gms), high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

Taking down galvanised tubing of 15 mm dia bore including cleaning for refixing in any position and S&F 15 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

Taking down galvanised tubing of 20 mm dia bore including cleaning for refixing in any position and S&F 20 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

Taking down galvanised tubing of 25 mm dia bore including cleaning for refixing in any position and S&F 25 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

Taking down and re-ixing 15mm bore old GI tubing to walls, ceiling or laid in floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed by Engr-in-Charge.

Taking down and re-ixing 20mm bore old GI tubing to walls, ceiling or laid in floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed by Engr-in-Charge.

Taking down and re-ixing 25mm bore old GI tubing to walls, ceiling or laid in floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed by Engr-in-Charge.

Taking down eaves, gutters and rain water pipes (any size or pattern) including all fittings, head, shoes, bends, swan-necks etc, cleaning for refixing (measured overall as fixed along the centre line over fittings, fixed in any length with rubber ring joints on wall with and including PVC clamp complete all as specified and directed.

Taking down eaves, gutters and rain water pipes (any size or pattern) including all fittings, head, shoes, bends, swan-necks etc, cleaning for refixing (measured overall as fixed along the centre line over fittings and S&F 110mm dia bore PVC (SWR) pipes, single socketed, fixed in any length with rubber ring joints on wall with and including PVC clamp complete all as specified and directed.

M&L Water proofing treatment on RCC roof of (Multistorey Bldg) etc, comprising with the following operation & as specified here in below :-

Dismantling existing brick tiles or terracing tiles including existing water proofing treatment (if any) of any description and cleaniing the roof slab surfaces complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in padding / levelling course in any thickness (average thickness to be measured) over roof slab complete all as specified and directed by Engineer-in-Charge.

M&L for 10 mm thick plastering in cement mortar (1:3) mixed with liquid water proofing compound @ 200 ml per 50 Kg bag of cement or as per manufacturer's instructions on fair finished concrete surfaces over roof slab, finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid for separately at supply only rates.

M&L for cleaning of surfaces over roof slab and applying evenly a priming coat of solvent based bituminous primer @ 0.30 Ltr per Sqm of approved brand conforming to IS: 3384-1986 complete all as specified and directed by Engineer-in-Charge.

M&L for laying a layer of APP based polymeric membrane 3 mm thick (minimum) weighing 3.0 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/Sqm), laid with over laps not less than 100mm on transverse direction and 75mm on longitudinal directions and sealed with torch application complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed cement concrete tiles 20cmx20cm20mm thick, laid over 15mm thick screed bed or bedding layer in cement mortaR (1:4), set and jointed in neat grey cement slurry over roof slab including ctting and polishing complete all as specified and directed.by Engr-in-Charge.

Supply only liquid water proofing compound of approved make ISI marked all as specified and directed.

Sai Ram Associates

His And Her Enterprises

Saket Traders

M/s SHIVAM CONSTRUCTIONS

JYOT BUILDERS

M/S AVADH ENTERPRISES

Jairajyadav security services

AIRDOT ENGINEERING