DAY TO DAY MAINT OF PLUMBING SANITARY FITTINGS PETTY BR WORKS AND WELCOME MAINT TO OFFRS ACCN AND CERTAIN OTHER MAINT WORKS AT RANGIA MIL STN UNDER GE RANGIA

Amount

Demolition of brick work built in any cement mortar complete all as specified and as directed by Engineer-in-charge.

M&L for disconnecting existing tanks exc 500 L n exc 1000L, setting a side (or lowering if required) for water tanks, dewatering, cleaning and sterilisation all dirt and scale and algae formation inside the tank bu using TERBAC G5/NB-10/Inchlor-5 (lab tested chemical) incl fixing sticker mentioning “ TANK CLEANED ON” with date, month and year. The cleaning process would follow fwg stages as under : (a) To drain out the water by using exit valve or high capacity dewatering system. (b) Cleaning all the algae formation inside the tank by using TERBAC G5/NB-10/Inchlor-5 chemical. (c) Scrubbing the walls with mechanized scrubber & fresh water cleaning by high speed jet pump. (d) 1st stage of bacteria screening by degermification by using TERBAC G5 halogen compound. (e) Cleaning the floor of the water tank by industrial vacuum cleaner. (f) 2nd stage of bacteria screening & sterilizing method by using UV ray within the tank & killing all suspended bacteria. (g) 3rd stage of bacteria screening by sterilizing the floor of water tank by using strong oxidizing agent TERBAC-G65/NB-60/Inoxi-60. Note : The quated rate to include for removal of mud, grits and deposits etc properly from site of work and on completion of wk, sterilization certificate to be submitted to Engr-in-Charge. NOTE: (i) Cleaning needs to be done mechanically by authorized dealer/agent as approved by GE. (ii) Chemical shall be approved by GE.

M&L for brick work with sub-class `B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.

Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and as directed by Engineer-in-charge.

M&L for G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and as directed by Engineer-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or one side of lathing in cement mortar 1:4 , surface finished even and smooth without using extra cement using water proofing compound in top layers as per manufacturer's direction complete all as per specified and as directed by Engineer-in-charge. Note - WPC shall be measured and paid saparately.

Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.

M&L rendering 10mm thick on other than fair faces of brick work or on other side of lathing in cement mortar 1:6, surface to be finished fair & even without using extra cement, complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on brick wall of any description, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge.

M&L 10mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

Demolition of unreinforced cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge.

S&F of Mild Steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as per specified and as directed by Engineer-in-charge.

Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge.

M&L 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed by Engineer-in-charge.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-charge.

S&F in-repair of Jet Spray nozzle with PVC tubing, fixing nut & Jet flange, complete all as specified and as directed by Engineer-in-charge.

M&L second class hard wood plain fillets, square or rectangular or triangular in section, clean sawn, secured with nails or brads having sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and as directed by Engineer-in-charge.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings, complete all as specified and as directed by Engineer-in-charge.

M&L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed by Engineer-in-charge.

All as per serial item no. 21 above but except sheeting.

S&F of aluminium (extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and as directed by Engineer-in-charge.

S&F of 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed by Engineer-in-charge.

M&L for 6 mm thick Asbestos cement serrated ridge for corrugated and semi corrugated sheets fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed by Engineer-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge.

S&F in-repair of brass chromium plated Tubular towel rail, 600mm long, 20mm dia, complete all as specified and as directed by Engineer-in-charge.

M&L for 4m thick Asbestos Cement board fixed to timber frame in ceiling with screws, complete all as specified and as directed by Engineer-in-charge.

S&F solid PVC wall paneling consisting of 5 mm thick PVC wood grain printed PVC sheet inclusive of solvent cement and fixing at site as per specification and directed in any position with screws, complete all as per specified and as directed by Engineer-in-charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as per specified and as directed by Engineer-in-charge.

S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.30 mm and cross tee of size 22x35x0.60mm with 4mm dia GI wire as suspender and including 4mm thick E-Board classic (decorative type) including fixing arrangement from steel truss of any type and applying three coats of white wash on exposed surface, complete all as per specified and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge.

M&L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L for vitrified ceramic tiles 10 mm thick of light shade (square/rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as per specified and as directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles 450 x 275 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed by Engineer-in-charge.

Taking down chowkat or frame not exceeding 1.5 Sqm each (without taking off shutter from the frame), complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description not exc. 1 sqm each, complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., with sash bars, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators etc complete as specified in SSR part I section & clause 8.24 (b) and as directed by Engineer-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, and also both sides are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by the Engg-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as per specified and as directed by Engineer-in-charge.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and as directed by Engineer-in-charge.

S&F in-repair of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed.

S&F in-repair Curtain rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all specified and as directed..

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as per specified and as directed by Engineer-in-charge.

Supply and fix in repair White/ Black Plastic Water Closet Seat for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed, complete all as specified and as directed.

S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.

S&F 100 mm long extruded Aluminium alloy handles, fabricated type, anodised, complete all as per specified and as directed by Engineer-in-charge.

S&F aluminium alloy 200 mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy, complete all as specified and as directed by Engineer-in-charge.

S&F galvanised mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples, complete all as specified and as directed by Engineer-in-charge.

S&F in repair galvanised mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with galvanised wire staples, complete all as specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed by Engineer-in-charge.

S&F 3 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge.

S&F 3 mm thick figured glass, in squares not exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore Chromium plated bib taps, fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repair bib taps, standard of PTMT(Minimum weight - 90 grams) 15mm bore of any colour, high pressure, screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15mm angle stop cock cast copper alloy, fancy type with chromium plated for iron pipe or for unions complete all as per specified and as directed by Engineer-in-charge.

S&F in repair chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC 10 ltr capacity low level flushing cistern white with inlet ball valve float including a pair of cast iron brackets duly painted, PVC connection pipe 15 mm, 32 mm bore PVC flush pipe, making good disturbed surfaces in cement mortar 1:3, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair PVC water tank cover suitable for 500/750/1000 Ltrs capacity with 6mm dia MS bar hanging device and 6mm dia bar locking arrangements, complete all as specified and as directed.

S&F in repair 15mm dia PVC connection pipe with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-charge.

S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.

S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar 1:4 to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm, complete all as per specified and as directed by Engineer-in-charge.

S&F in repairs 20 mm ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20 mm - 210gms/25mm-455gms/ 40mm - 690 gms) and fixed in position complete all as per specified and as directed by Engineer-in-charge.

S&F in repair vitreous china wash down cistern mounted water closet pan, single piece, couple closet (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge. Make- Jaquar Cat Pt No.- CNS-WHT-751SS & CNS-WHT-201

S&F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand etc., complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair cromimum plated health faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 m long Easy Flex tube in chrome finish, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old wood or wood based surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surfaces and applying two coats of oil bound distemper on walls over one coat of chalk whiting primer, complete all as per specified and as directed by Engineer-in-charge.

M&L preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed by Engineer-in-charge.

M&L for preparing new plastered surfaces and applying two coats of cement based paint on walls over a coat of alkali resistant primer, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP Basin mixer for mixing hot & cold water arrangement screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair vitreous china ware wall hung wash hand basin white, flat back, 200 x 650 x 400 mm size (flat back or angle back type) including padestal and cutting for and pinning ends of brackets or erecting stand etc., complete all as per specified and as directed by Engineer-in-charge. MAke- Jaquar Cat Pt No.- SLS-WHT- 0611F

M&L for preparing old decorated plaster surfaces etc and applying one coat of white wash on walls, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing old decorated plaster surfaces etc and applying one coat of white wash on ceiling, complete all as per specified and as directed by Engineer-in-charge.

S&F in-reapir of Plate rack made out of stainless steel sheet of 0.5mm thick, minimum size 800mm x 900mm x 250mm (HxWxD) including fixing brackets or fitted with existing shelves, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparing old distempared surfaces including washing, rubbing down and stopping and applying one coat of oil bound distemper on walls, complete all as per specified and as directed by Engineer-in-charge.

M&L for complete removal of existing treatment of old distempared surfaces and applying two coats of oil bound distemper on walls including one coat of chalk whiting primer and a coat of 1.0mm avg thick wall care putty, including rubbing down the putty surfaces to obtained smooth finish, complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth, complete all as per specified and as directed by Engineer-in-charge.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet pan, (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as per specified and as directed by Engineer-in-charge.

S&F in repair Vitreous China White Squatting Pan (Orissa Pattern) of size 580x440 mm with integral foot rests, 'P' or 'S' Trap and (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair, complete all as specified and as directed.

S&F in-repair of 32mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to alls, ceilings or in loors etc., concrete complete all as per specified and as directed by Engineer-in-charge.

S&F in-repair of CP Soap dish, any type of size 160 x 160x 90mm fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-charge.

S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (with hand shower and hoses) arrangement screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length fixed to wall 110mm bore with rubber ring joint complete all as specified as directed.

S&F PVC (SWR) bends 110mm bore (any radious), jointing with solvat cement, complete all as specified.

S&F in repair gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 20 mm bore including dismantling unserviceable one complete all as per specified and as directed by Engineer-in-charge.

S&F PVC (SWR) bends with access door 110mm bore (any radious), jointing with solvat cement, complete all as specified.

S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal, jointing with solvat cement, complete all as specified.

S&F in-repair of corner glass shelves assembly with border to hold the bathing kit, minimum width 150mm and fixed in position, complete all as per specified and as directed by Engineer-in-charge.

S&F in-repair of brass, chromium plated toilet paper holder, fixed to wall, complete all as per specified and as directed by Engineer-in-charge.

Dismantling water tanks of capacity exc. 250 and not exc. 500 ltrs, complete all as per specified and as directed by Engineer-in-charge.

Dismantling water tanks of capacity exc. 500 and not exc. 1000 ltrs, complete all as per specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks triple layered ISI Marked (cylindrical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I, complete all as per specified and as directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks triple layered ISI Marked (cylindrical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I, complete all as per specified and as directed by Engineer-in-charge.

S&F in repair 15mm dia bore pillar tap fancy type cast copper alloy with capston heads chroumium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as per specified and as directed by Engineer-in-charge.

M&L for preparation of new or previously untreated wood or wood based surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge.

S&F in-repair of Flexible Waste Pipe 32/40 mm bore dia (bore) 90 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed.

M&L for preparation of new or previously untreated steel or iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide, primer over 10cm width or girth complete all as specified and as directed by Engineer-in-charge.

M&L for Granite (of any type) work (table rubbed and polished) 15mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engineer-in-charge.

S&F in repair of PTMT towel rail of 600mm long, fixed with CP screws, complete all as specified and as directed by Engineer-in-charge.

M&L for Petty repair to high or low level flushing cistern by adjusting the float valve cheking of PVC connection, PVC bend including replacing of rubber washer checks nuts plunger etc any type of flush complete all as specified and directed.

S&F in-repair of PVC Mirror cabinet with inner shelves for holding bath/saving kits of size 300 x 450mm, complete all as per specified and as directed by Engineer-in-charge.

M&L for providing and injecting chemical emulsion for post constructional anti-termite treatement along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sq. Mtr. of the vertical surface of the sub-structures to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S KIRAN ENTERPRISE

M/S Rajkamal Enterprise