TENDER FOR SPECIAL REPAIR OF MD ACCN NO P-45 (1 TO 12) (KR VIHAR EAST) AT RATNUCHAK MIL STN UNDER GE KALUCHAK

Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 Square Meter each and removing from site complete all as specified. (The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface)

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Square Meter but not exceeding 4 Square Meter each and removing from site complete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissible for the material and labour for making good the disturbed surface)

Taking down door shutters and refixing in same opening after carryiong out alteration of any description area exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified and as directed.

Demolition of cement concrete of any description at any floor not other wise described complete all as specified and as directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for refixing or removal to store, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and as directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and as directed.

Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1 : 4 complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and as directed.

S&F Aluminium handles D type anodised 150 mm long ISI marked complete all as specified and as directed.

S&F Stainless Steel Butt hinges, medium weight, 100mm long, complete all as specified and as directed.

M & L for cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed block for securing hold fasts etc complete all as specified and as directed.

S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.

S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.

S&F pressed steel frame of size 60X40mm for cupboard doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L PCC 1:3:6 (using 12.5 mm graded aggregate as mass concrete filling in hollow portion of the door frames complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and supply & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

Supply and fixing of 35 mm thick single piece factory made wire gauge shutter and incl of wire cloth(stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG ,size 19x19 mm complete in all respect with lock rail & beautified all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and as directed..

S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.

S&F 300 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section complete all as specified and as directed.

S & F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

S&F for 150mm long floor door stopper of Stainless Steel body and tongue, with hard drawn steel spring complete

all as specified and as directed.

S& F in repair Mild steel chromium plated curtain rod 25 mm dia with supply & fixing brackets ,stops ,rollers,globe ,knob etc, of standard thickness and of any length complete all as specified and as directed.

S & F in repair 18 mm thick factory made 100 % WPC decorative flush shutter(for cupboard and vanity etc)made from coextruded three layer rigid foam sheet (single extruded ) with 0.8 to 1 mm rhick outer layer having density not less than 1400 kg/cum , complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm, complete all as specified and as directed.

S&F Aluminium handles D type anodised 100 mm long ISI marked complete all as specified and as directed.

S&F 100 mm Hasp and staple, Stainless Steel, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles )300 x 300 x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost is allowed for Removing and re-fixing and necessary cutting of door etc if any during execution of work)

Mild steel magnetic catches of size 50 mm, complete all as specified and as directed.

M&L for Colored glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thick set over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and as directed.

M&L Non Skid digital pattern Joint less coloured tiles 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.16 sqm and n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item 35 above, but on vertical surfaces over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and as directed.

S & F Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed base 15 MM thick in CM 1: 6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note : Single piece kota stone to be used for steps

S & F Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat of CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete all as specified and as directed. Note : Single piece kota stone to be used for steps

Cutting chases, pinning through brick wall in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of 20 mm outer dia with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Supplying & laying CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of 25 mm outer dia with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F in repairs Angle cock fancy type chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and as directed.

S&F fancy type Brass CP Wall mixer with L bend for mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified and as directed.

S&F in repairs bib tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe complete all as specified and as directed.

S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts and flushing cistern) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin corner type, white , flat back, size 450X300 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand ,32 mm waste coupling and waste pipe of 75 mm long complete all as specified and as directed.

S&F in repairs PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings and all as specified, including dismantling old flushing cistern any type complete all as specified and as directed.

S&F PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and as directed.

S&F 15 mm bore brass CP basin mixer for mixing hot and cold water screwed down for iron pipes and fixed in repairs complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose, fancy type,125mm with swivel joints and 300 mm long arm with including fixing to pipe or union fixed, complete all as specified and as directed.

S&F fancy type Brass CP kitchen Sink Wall mixer for mixing hot & cold water, screwed down high pressure, screwed both ends for 15mm bore for iron pipe or for unions & fixed complete all as specified and as directed.

S&F Chromium plated grating 100mm dia complete all as specified and as directed.

S&F PVC (SWR) floor trap , plain including jointing with solvent cement 75mm bore fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete including dismantling existing pipes complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door 75mm fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) juncton single (single T ) equal or un equal with access door 75 mm fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) juncton single (single T ) equal or un equal with access door 110mm fixed in repairs complete all as specified and as directed.

Box type steel window comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panes shall be mea

Each Job

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed (WPC to be measured separately) The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item.

sured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts , PCC bed blocks etc complete all as specified and as directed.

M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms over and including 15 mm thick backing coat cement mortar (1 : 4) including pointing ,mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

M&L for cutting/drilling hole in Brick wall/RCC beam by mechanical mean exc 300mm deep in slab of WC/ Bath including fixing 40mm dia 450mm long GI Spouts pipe complete all as specified and as directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, including 8 mm square grill complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors complete all as specified and as directed.

S&F Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F in repairs Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and as directed.

Each Job

Complete removal of existing roof treatment or roof tile and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and as directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in, repair complete all as specified and as directed.

PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item complete all as specified and as directed.

S&F in repairs Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank of complete all as specified and as directed.

Material & Labour for RCC chajja/fascia/parapet repair by using following steps :- (a) Removal of existing concrete along with loose damaged and cracked concrete/cover concrete from chajjas etc, exposing corroded steel reinforcements upto a depth of 10mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting to chipped concrete and reinforcement all as directed by Engineer-in-charge. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed. (b) Cleaning the surface of reinforcement bars from dust by using wire brushes and dry cloth and applying FOSROC Rebakleens RR- Rust Remover or equivalent using small brush and allow to react it for 16-24 hrs. (c) Providing and applying two coats of Fosroc Nitozinc Primer - two component, zinc rich epoxy, anti-corrosive protective coating or equivalent by brushes to the exposed and cleaned rebars with an interval of 45minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours all as directed by Engr-in-Charge.

(d) Cleaning the concrete surface thoroughly once again using wire brush and applying one liberal coat of Fosroc Nitobond EP- two component Epoxy bonding agent or equivalent to the parent concrete with brush. (e) Providing and applying 50 mm thick Renderoc SP 40 - or equivalent Polymer modified single component, alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortar after mixing of Renderoc SP 40 or equivalent with recommended qty. of water using slow speed drill fitted with mixing paddle and then applying the same to prepared surface and finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface all as directed by Engr-in-Charge. Note : Item rate is inclusive of all materials, labour, tools and plants, scaffolding and transportation etc. complete as per specifications and as directed by Engr-in-Charge

S&F Gun-metal globe or gate valves with iron handle quarter turn type, screwed both ends for iron pipe or for unions of 20mm dia bore and fixedin repairs, complete all as specified and as directed.

15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed.The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item.

M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces even and smooth without using extra cement all as specified and as directed.The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and as directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and as directed.

Supply only WPC complete all as specified and as directed.

75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete all as specified and as directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.)

M&L for applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered ceiling surfaces including one coat of alkali resistant primer complete all as specified and as directed.

Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of ceiling and primed with alkali resistant priming paint and two coats of oil bound distemper using mechanical vaccume machine complete all as specified and as directed.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of walls and applying 3 mm thick wall care putty, primed with alkali resistant priming paint and two coats of oil bound distemper using mechanical vaccume machine complete all as specified and as directed.

M&L for applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered wall surfaces including 3 mm thick wall care putty ,primed with one coat of alkali resistant primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by Berger Bison Putty / crack fill paste of Berger Paints or equivalent make and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed.Allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed Make: Berger Paints Weathercoat Long Life Flexo / Nerolac excel Total / Asian Paint Apex Ultima / JK Maximo Ultra The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item.

Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airlessspray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 915mm x460 mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and as directed.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and as directed.

Kitchen plate rack of stainless steel of size "30x31x10" inches complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any positon complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colou

r, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 ( 40 mm graded aggregate ) as in sub base to flooring 75 mm thick complete all as specified and as directed.

Cutting holes into or through brick walls (Superficial area Exc 150 sq. cm but n exc 400 sq cm) built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

M&L for applying one coats of synthetic enamelled paint on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Forming holes exc. 50 cu cm but n exc 100 cu cm for balusters, newels, rag-bolts, etc. and grouting with cement mortar 1:2 after balusters, etc. are fixed, complete all as specified and as directed.

S&F steel fasteners of size 75 mm long steel supports fixed to walls complete all as specified and as directed.

Excavation in trenches, not exc 1.5m wide not exc 1.5m in depth: for foundation, etc, or for shafts , wells cesspits, manholes, pier holes, etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out, in any type of soil complete all as specified and as directed.

Demoliton/breaking of drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as spd of 150mm/200 mm dia pipe inclding demoilition of cement concrete haunching etc complete all as specified and as directed.

Removal of surplus excavated soil to a distance exc 250 m & not exc 500m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

M&L concrete bed to 150 mm bore pipe in D2 1:4:8 (40mm graded aggregate) inclduding haunching against the sides of pipe complete all as specified and as directed.

M&L MS TMT bars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT bars complete all as specified and as directed.

Taking out of solid/semi solid sludge from existing main holes of any size and any depth and burying the entire sludge/sludge water in to excavated pit of adequate size including excavation and covering with earth or disposing off into covered vehicles outside the periphery of defence land to a distance exceeding 1 KM including taking off RCC/iron main holes covers and refixing the same after clearing.

S&F 150mm dia DWCPE(SN8) HDPE pipes laid in trenches on PCC bed incl jointing as per manufacturers instructions and as directed (Bedding/ Haunching and earthwork paid separately under respective items of Schedule) complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.

M&L providing precast cement concrete in cover slab (for manhole) type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete for disposal of waste water from washing machine complete all as specified and as directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 75mm PVC (SWR) junction double, (double T) equal or unequal with access door complete all as specified and as directed.

S&F PVC (SWR) bends with oval access door 75mm fixed complete all as specified and as directed.

Taking out carefully old copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and as directed.

Taking down old distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and as directed.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed. Note: The rates quated above are inclusive of sunken boxes of suitable sizes and white modular cover plate of suitable module as per site requirment.

All as per item No 125 above but for one fan/Exh point controlled by one modular switch complete all as specified and as directed.

All as per item No 125 above but One light point controlled by two way switch complete all as specified and as directed.

All as per item No 125 above but for one bell point controled by one bell push all as specified and as directed.

All as per ser item No 125 hereinbefore but for one 3 pin socket outlet 5 Amp Same board complete all as specified and as directed.

All as per ser item No 125 hereinbefore but for one 3 pin socket outlet 5 Amp independent complete all as specified and as directed.

All as per Item no 125 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and as directed.

Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and as directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and as directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and as directed.

Supply and fix of Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Supply and fix Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and as directed..

S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and as directed.

Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED lamp B22 base complete all as specified and as directed.

Supply and fix of Bell push flush type modular 5 Amp complete all as specified and as directed.

Supply and fix Bell multi music 230 volt ,AC single pole complete all as specified and as directed.

Supply and fix of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable

of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed.

Supply and fix of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed.

Supply and fix factory made epoxy powder coated Distribution board VTPN 4 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and as directed.

Supply and fix factory made epoxy powder coated Distribution board SPN 8 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and as directed.

All as per srl Item No- 146 above but 2 ways Single door complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve MCB SP-06 to 32 Amp complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve MCB SPN 32 Amp 50Hz AC supply, complete all as specified and as directed.

Supply and fixing LED Bldg security light 35W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens & toughned glass IP-66, Electronic driver with APFC,Lower THD,Open ckt protection,Overvoltage protection,surge protection upto 10KV with built in SPD and mounting bracket of suitable size as complete all as specified and as directed.

S&F MCCB 415 Volt 16 KA 4 Pole 63 Amps complete all as specified and as directed.

S&F single core PVC insulated unsheathed multistanded copper conductor cable 1.5 Sqmm , 1100 Volts ISI marked drawn through existing point wiring complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

M & L in repair for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site complete all as specified and as directed.

M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipes two Nos etc all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm , connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed complete all as specified and as directed.

Taking down electric enerty meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix Anti Suicide Fan Rod of suitable size and length with the provn, If the load on fans exceeded 22 kgs, than the smart rod/pipe opens from its centre and spring in the pipe complete all as specified and as directed.

Cutting existing steel tubing 15 mm bore for alterations or additions (Each cut measured) complete all as specified and as directed.

Screwing existing steel tubing 15mm for alterations or additions complete all as specified and as directed.