REPAIR / MAINT TO KITCHEN UTILITY SANITARY FITTING IN MD ACCN IN ZONE B AND C AREA OF AGE B/R-I UNDER GE (CENTRAL) KHADKI.

Amount

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Supply and fix in repairs 18mm thick marine plywood laminated of any colour with High glossy acrylic sheet of 3mm thick, grade I as per IS 14587, for frame and shutter for kitchen cabinets complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs cup hinges medium weight, cold rolled mild steel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs stainless steel 304 electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed. MAKE :- Cat Part No 5704 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints NOTE :- Size of basket may vary +5cm/-5cm

Supply and fix in repairs stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed. MAKE :- Cat Part No 5837 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints NOTE :- Size of basket may vary +5cm/-5cm

Supply and fix in repairs 200mm length stainless steel cabinet drawers handles complete all as specified and directed. MAKE :- Godrej Kitchen fittings / Sleek by Asian Paints

Supply and fix in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed. MAKE :- Cat Part No-6175 of Godrej Kitchen appliances.

Supply and fix in repairs of stainless steel Plane wire Basket/ trolley SS 304 having size of 506x480x200mm, with heavy duty and grade steel with finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed. MAKE :- Cat Part No-4265 of Godrej Kitchen appliances.

Supply and fix in repairs stainlesss steel modular perforated cutlery basket SS 3054 size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed. MAKE :- Godrej kitchen appliances or equivalent.

Supply and fix in repairs stainless steel hanging spice rack having three shelf spaces length of 500 mm complete all as specified and directed. MAKE :- Godrej kitchen appliances.

Material and labour for 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base for levelling/above sub base etc complete all as specified and directed.

Material and labour for non skid coloured digital ceramic tiles 300x300/400x400 mm x 6 to 7mm thick, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, including dismantling, complete all as specified and directed.

Material and labour for glazed ceramic tiles size of tiles 450x350/300x200/300x600x5 to 6mm thick as in vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4, including dismantling, complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in cement mortar (1:4), including dismantling complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement Screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for machine cut cudappah stone laid vertical or horizontal 18 to 22mm thick jointed with adhesive to make a cooking platform including dismantling existing RCC/PCC or any type of platform complete all as specified and directed.

Supply and fix in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repair Harrison rails, of anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.

Resecuring or easing and adjusting without taking down of Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge

Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows/ventilators etc, complete all as specified and directed.

Demoition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkats or frames with shutter without taking off shutters from frame of door of any description n.exc 1.50 sqm each and removing from the site complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames with shutter without taking off shutters from frame of any description exc 1.50 sqm but n.exc 4.00 sqm each and removing from the site complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.

Supply and fix factory made internal PVC door frame of size 50x47mm single riveted made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engr-in-Charge.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed by Engr-in-charge.

Supply and fix pressed steel door frame of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 150mm fixed with screws complete all as specified and as directed by Engr-in-Charge.

Supply and fix aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix 100 mm size stainless steel Medium weight butt hinges for door shutters and frames fixed with bright screwes complete all as specified and as directed by Engr-in-Charge.

Supply and fix floor door stopper 140mm length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane at any height complete all as specified and directed.

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fix window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc, including making good the wall for fixing new window, complete all as specified and as directed by Engr-in-Charge.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs, including making good the wall for fixing new ventilator complete all as specified and as directed by Eng-in-Charge.

Supply and fix 20mm thick 2nd class hardwood, Boarding, supplied & fixed with nails in any situation (except flooring and skirting) planned one side,Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed.

Supply and fix ready made pully operated cloth drying system with L angle 31" for 4 pipe system with length of each pipe 5 ft (1.53m), i.e., total length of 20 ft(6.12m) including locking syetem rope and all fixing material complete all as specified and as directed by Engr-in-Charge. MAKE :- Easy Dry

Supply and fix in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors (Concealed), including taking down, complete all as specified and directed by Engr-in-Charge.

Supply and fix vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified and directed by Engr-in-Charge.

Supply and fix PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets complete all as specified and directed by Engr-in-Charge.

Supply and fix vitreous china wash basin white flat back size 580x450 mm including, 32 mm dia CP waste fitting and brackets complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and directed.

Supply and fix in repairs 32 mm bore PVC waste pipe 1000 mm long of approved make suitable for WHB, Urinals etc complete all as specified and directed.

Supply and fix in repair health faucet cera Model-F 8030105AB (ABS),with 1 meter SS Braided connection pipe or techno commercial equivalent complete all as specified and directed.

Supply and fix in repair wall mixture three in one with complete accessories complete all as specified and directed .

Supply and fix in repair pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed .

Material and labour for preparation of old plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper complete all as specified and directed.

Material and labour for preparation of old plasterd or unplastered surfaces of ceiling and applying two coat of oil bound destemper complete all as specified and directed.

Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and directed.

S P DEVELOPERS (BID ID -3135678)

MANIYA CONSTRUCTION CO (BID ID -3127392)

M/S KISHAN CONSTRUCTION (BID ID -3134280)

UNIQUE ENGINEERS (BID ID -3127050)

Shri Sant Cosntruction (BID ID -3127213)

Suraj Sukhdev More (BID ID -3135730)