Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹20.8 L+₹36,975.49 (1.81%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹21.5 L+₹1.0 L (5.13%)Rejected-Finance 130 292 MAKHAN LAL KA HATA AJEET GANJ KIDWAI NAGAR KANPUR 208061 | 208061 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹22.8 L+₹2.4 L (11.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹23.0 L+₹2.5 L (12.2%)Rejected-Finance OFFICE 2ND FLOOR MEHRA TOWER TIBRI ROADD GURDASPUR 143521 | GURDASPUR | PUNJAB | 143521 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹36.6 L
EMD Value
₹73,200
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri))-143530
Spl repair to certain B/R and E/M wks in bldg No T-34 of OR Md accn at Bana singh Enclave and certain sanctioned works at Tibri Mil Stn.
2022_MES_555793_1
GE GSR-32/2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹73,200
Yes
3 Dec 2022
4 Oct 2022
8 Nov 2022
4 Oct 2022
1 Nov 2022
19 Oct 2022
Amount
Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair complete all as specified and directed
M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed
M&L for complete removal of existing treatment of old decorated surfaces plastered or un plastered of walls complete all as specified and directed
M&L for preparation of surface and applying 2mm thick wall care putty complete all as specified and directed
M&L for applying one coat of primer on surface to be distempered complete all as specified and directed
M&L for applying two coats of oil bound distemper on walls complete all as specified and directed
M&L for preparation of old decorated surfaces plastered or un plastered of ceilng and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for prepration of newly plastered surface and applying three coat of white wash as on ceiling.
Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqm but not exceeding 4 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed
S&F powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge. (Minimum thickness of powder coating 50 micron)
S&F anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing average not less than 0.90kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F Mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed.
S&F Sheet glass, 5.5mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed
S&F door closer hydraulically regulated, (alminium extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.
Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S&F PVC insulation panels (thickness 10mm) with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of GI as per specification and drawing
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on and incl PVC frame as per specifications and drawing.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per manufacturer instruction.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises.
M&L for Vitrified tiles, dark shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.
Supply and fixing 12mm thick toughened glass with designed pattern including fixing arrangements like suitable hinges, fittings, handles etc complete all as directed.
Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed
All as per Srl item No 26 above but except bricks (old dismantled serviceable bricks obtained from demolition shall be reused after necessary cleaning of mortar)
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 , all as specified and directed.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43ltre/10sqm over and including priming coat of exterior primer applied @ 0.90 ltre / 10sqm over new surface including preparation of surface.
Material and labour for applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43 ltre/10sqm over old surface including preparation of surface
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed
S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.
S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.
S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, painting shall be measured and paid for separately
S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately
S&F 35mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed. ISI Marked.
S&F 35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
S&F MS framed work as in chowkats, door or gates, chowkats of angle or other section with gusset plates, rail, braces, etc and similar work incl primer conform-ing to Fe 290Gde E-165 complete.
Providing cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) in bed block for hold fast for doors, roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed .
S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones.
S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed with nails/ with oil putty complete all as specified and directed
All as per Srl item No 46 above but figured glass pin head type & glazing with oil putty
S&F 300 mm long mild steel, ordinary rat tail rod pattern spring, including roller and roller plate.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed
S&F 200 mm aluminium, anodised, barrel tower bolts of extruded section.
S&F150 mm Aluminium, anodised, barrel tower bolts of extruded section.
S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised
S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised
S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter, overall length of cover plate 140mm.
S&F 100mm long butt hinges, medium weight, cold rolled mild steel.
M&L in repair for block boards, 18/19mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame work for shelves, partitions and shutters complete all as specified and directed.
S&F 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F continous piano hinges of flaps width 30mm (when open), mild steel bright finish or electro galvanised
M&L two coats of synthetic enamel painting on new steel surfaces of any description over 10 cm in width or girth not otherwise described and a priming coat of red oxide including prepration of surfaces
M&L one coat of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of old painted surfaces
M&L two coats of synthetic enamel painting on new wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer including prepration of surfaces.
M & L for one coat of synthetic enamel paint over old wooden surfaces exceeding 10cm width or girth including preparation of old painted surface complete.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc and 25mm thick PCC type B-0 1:2:4 using12.5 mm gradded aggregate as in floor complete all as specified
S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.
All as per item No 64 above but on vertical surfaces on rendering 10mm thick in CM 1:4.
S&F glazed ceramic coloured tiles with approved pattern/highlighter on vertical surfaces such as skirting , dados and risers to steps etc. 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
S&F non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed
Supply and fixing vitreous china squatting pan (Orissa Pattern) size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including connection to trap and flushing pipe, etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified.
S&F in repair vitreous China wash hand basin white, flat back size 550x400mm including PTMT waste coupling 32mm bore, waste PVC pipe of suitable size and length complete
S&F in repair pillar tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve, float handle and flush pipe of polythylene of low or high density or PVC, 32mm dia complete all as specified and directed
Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, white, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minimum weight 210gms with aluminium rod complete all as specified and directed
Taking up or down 15mm dia steel tubing and connections all as specified and directed.
S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
Fixing only 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc) including fittings and cleaning all as specified and directed.
Taking up or down 20mm dia steel tubing and connections all as specified and directed.
S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
Fixing only 20mm dia steel tubing and connection in new or old position including fittings and cleaning all as specified and directed.
S/F in repair 15mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
S/F in repair 20mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed.
S&F in repairs 125mm brass CP shower rose fancy type with swivel joints with brass CP arm minimum 195mm long complete all as specified and directed.
S&F in repair Aluminium anodised tubular towel rail D type 60cm long between flanges including brackets complete all as specified
S&F in repair 100mm dia stainless steel grating with or without hinge type or hole type complete all specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.
S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)
S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F in repair stainless steel kitchen plate rack size 600mm x 900mm x 250mm deep made out of 0.63mm thick stainless steel sheet (Grade AISI 304) including fixing arrangement complete all as specified and directed
S&F in repair sinks with drainage board made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe overall size 915mm x 460mm bowl size 410mmx 330mm x 160mm complete all as specified and directed.
Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., ( measured overall as fixed along the centre line over fittings and accessories
S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2m length including all fittings complete all as specified and directed.
S&F 110mm bore PVC(SWR) pipes single socketed in any length laid in trench or in floor including all fittings complete all as specified and directed by Engineer-in-charge
S&F 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2m length including all fittings complete all as specified and directed.
S&F 75mm bore PVC(SWR) pipes single socketed in any length laid in trench or in floor including all fittings complete all as specified and directed by Engineer-in-charge
S&F 110mm bore PVC (SWR) bends any radius with access door
S&F 75mm bore PVC (SWR) bends any radius with access door
S&F 110mm bore PVC (SWR) junction single, (single T), equal or unequal with access door.
All as per item No 99 above but 75mm bore.
S&F 110 mm bore( SWR) vent cowl
M&L 75mm bore PVC (SWR) floor trap, plain with stainless steel grating including jointing with solvent cement
Demolition of cement concrete in sunken floors exc. 15cm thick (above ground level) and disposing the rubbish to low lying areas complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound as per manufacturer's instructions, finishing even and fair complete all as specified and directed
Supply only integral water proofing compound.
M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm after cleaning surface complete all as specified and directed.
M&L for cement concrete 1:5:10 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed
Dismantling brick tiles or terracing tiles , single layer on roofs
Demolition of mud in roofs , any thickness , including plastering and leeping (whether full thickness removed or only a part thereof
M&L for PCC (1:2:4) type B-0 (12.5 mm graded stone aggregates) as in padding in roof slab to maintain required slope finished even and fair.
M&L for 40 mm thick brick tiles laid over 15 mm thick screed bed in cement mortar 1:6 and jointed, grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on roof padding complete all as specified and directed
All as per item No. 112 above but except tiles.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to low lying areas complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in floor, finishing even and smooth without using extra cement .
Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor.
M&L for chequered cement concrete tiles coloured 30cmx30 cmx25mm thick, set jointed and pointed in neat cement slurry with pigment to match complete in floor including 15mm thick screed bed in CM 1:6.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar
M&L black zebra bhainsalana/ green marble work 18 to 20mm thick, (table rubbed and polished), in steps , jambs, pillars, window cills, cooking plat-forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including15mm thick screed in CM (1:4) complete.
M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in shelves, slabs supported on wall including demolition of existing RCC complete all as specified and directed.
M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as cover slab for manhole and similar work etc including demolition and form work complete all as specified and directed.
S&F mild steel TMT bars 6 to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed
M&L for use and waste of form work to sides and soffits of lintels, shelves, bands, including supports, overhangs, etc. for fair finished flat surfaces of concrete complete all as specified and directed
S&F in repair cutrain rod 25mm dia of Mild steel, PVC Coated with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed.
Material and Labour for repairing to RCC projections, chajjas, roofs, facia, ceiling etc. by scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3kg/sqm and filling the surfaces with cement sand mortar 1:3 or cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) using coarse sand in layers as required and reinforced with 8mm dia. TMT bars in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces in any situation and at height upto 6.5m complete all as specified. Notes:- 1. Cost of formwork shall be deemed to be included in unit rate quoted by the Contractor. 2. Flat area shall only be measured and paid.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth and not excceding 10 sqm on plan, getting out etc complete all as specified.
Returning filling in the soil including spreading, levelling, watering and well ramming in layer n.exc 25cm thick each layer complete all as specified and directed.
Removing excavated soil to a distance not exc 50m away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Demolition and breaking up drain pipes ( salt glazed ware, AC or Reinforced concrete ) 150mm bore set in cement mortar. as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of RCC /SGSW pipes 150mm bore, after the pipes have been laid and tested including complete all as specified and directed
Material and labour salt-glazed stoneware drain pipes internal diameter 150mm laid in trenches and jointed as specified
S&F MS framed work as in stairs (framed) including stringers treads, landing , balusters, hand rails, including cleat bracket etc conform-ing to Fe 410-W Gde E-250 quality A complete.
M&L for repair to steps/landing of staircase with RCC 1:2:4 type B-0 using 12.50mm gradded aggregate including necessary form work and demolition of existing concrete complete all as specified. Note- Reinforcement will be measured and paid separately
E/M PORTION Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches. Ceiling roses, pendents, Regulator Socket etc complete at site and making goods disturbed surfaces of walls, floors etc.
Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm (nominal area) using approved colour coding, 1100 volts grade, ISI marked, including PVC conduit heavy grade, 20 mm or higher dia. with fittings concealed in wall/ on surface for ceiling with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm (nominal area) 1100 volts grade, ISI marked and connecting to the common earth dolly including sunken factory made 16 SWG thick pressed steel terminal box of suitable size covered with and including modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including cutting chases and making good to the disturbed surfaces as per existing for One light point/fan point/ bell point controlled by one, one way switch complete all as specified and directed.
All as per Srl item No 136 above but modular socket 6A multipin 2 module on independent board.
All as per Srl item No 136 above modular socket, 6A multipurposes 2 module on same board.
All as per item 136 above but one light point controlled by two way switches.
All as per serial item No.136 here-in-before but with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area), using approved colour coding, 1100 Volt grade ISI marked including PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) 1100 Volt grade ISI marked as earth continuity conductor and connecting to the common earth dolly for 3 pin 15/16 Amps socket outlet on independent board.
M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt , FRLS cable of size 6 sqmm including 6 sqmm multistranded copper conductor FRLS cable PVC insulated for earthing duly connected with earth dolly, with approved colour coding including PVC conduit heavy grade, of appropriate dia. concealed in wall with accessories including cutting chases and making good to the disturbed surfaces as per existing and taking down old unserviceable wiring complete all as specified and directed. Note :- (a) Three run of cable alongwith PVC conduit together shall be measured as single run.
S&F modular switch one way ,1 module 6 amps single pole complete all as specified and directed.
S&F modular socket 6A multipin two modules complete all as specified and directed.
S&F modular switch one way 16 amps one module single pole complete all as specified and directed.
S&F modular socket, 6A/16A multipin combined 2 module complete all as specified and directed.
S&F switch modular 2 way 6A one module complete all as specified and directed.
S&F surface mounting universal batten housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube and taking down existing old unserviceable housing complete all as specified and as directed.
S&F LED tube 18/20W ultra bright LED polycarbonate tube with efficacy minimum 2000 lumens, CCT > 6500K, PF > 0.90 suitable for fitting into exsting/ new batten housing and taking down existing old unserviceable tube complete all as specified and directed. Note :- The contractor will submit the LM-80 and LM-79 report form manufacturer to Engineer-in-Charge for approval before incorporating the items in work
Taking down carefully ceiling fan complete from site removed Fans shall be deposited to MES storeyard for re-fixing after completion of work at the site .
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete including replacement of one pair of Canopy.
S&F in replacement of modular fan regulator 2 module electronic type 5 step 100watt,240 Volt and connecting complete all as specified and directed all as directed.
S&F Bell, AC, 230 volts, ding dong, single pole complete all as specified & directed.
S&F bell push modular type 6 Amp 1 module complete all as specified and directed.
Supply and fix for lamp holder, PVC/ polycarbonate type with back plate, brass terminals suitable for lamp holder base of and including 9 watt LED retrofit lamp complete all as specified and as directed.
M&L M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body
S&F GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 40mm x 5mm thick and drilling of hole for and including nuts, bolts and washers including painting MS clamps with two coats of synthetic enemal paint over a coat of red oxide primer including taking down the existing GI pipe bracket complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete.
Supplying and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with bus bar SPN double door complete all as specified and directed. Note : All the connection of incoming and out goiing wire in MCB will be made with thimble with suitable size as directed.
S& F in repair MCB single pole 6 amps to 32 amps, 'B' series complete all as specified and directed.
S& F in repair MCB single pole 6 amps to 32 amps, 'C' series complete all as specified and directed.
S& F in repair MCB single pole and neutral 40 amps , C series complete all as specified and directed.
Material and labour for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 Way MS sheet including fixing in the wall, cutting chases grouting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings :- (a) MCCB 4 Pole 100 Amps 16 KA breaking capacity with thermal release - 01 No (In coming) (b) Bus bar made out of Aluminium on insulated duly insulated wire adhesive tape RYB & black -4 Nos (c) MCB SPN 40 Amp-4 Nos, MCB SP 10-32 Amp - 08 Nos (Out going) (d) Connection from MCCB to bus bar will be made with Aluminium Strip of suitable ampacity as directed.
M&L Earthing complete with galvanised steel earth plate electrode 60cm ×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.
Supply and lay brick common burnt sub class "B" old size and for protection of cable laid in trenches for under ground cable all as specified.
M&L Sand cushioning trenches using fine sand to under ground cable, laid in two layers before laying the cable & after laying the cable complete all as specified
Supply and fixing in repair octane 24 watt 4000k LED Panel slim compact aluminium die cast edge lit panel recess mounted square fixture with opal diffuser and separate electronic drive, ceiling cut out 284x284mm all as specified and directed. Make Havells or equivalent of crompton /Wipro.
Supply and fixing in repair indoor type decorative recess mounted direct/ indirect 2' x 2' lumanaries light fixture 36 watt LED netural white complete including making connection with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
buta singh and sons
DEEPAK AND CO
AVTAR SINGH RAJU
talwinder singh and co
Harbhajan electric co
KAILASH CONSTRUCTION CO
JOGRAJ CONSTRUCTION COMPANY
M/s kulwant singh and sons
M/S GAGAN CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .