REPAIR ALL TYPES OF WOODEN FURNITURE UNDER GE (AF) BORJHAR

Amount

Sofa Set 5 pieces Refer Drg No FD-18m, FD-234 Repairs to upholstry of Sofa Set 5 pieces, consisting of a 2 pieces with arms and 3 pieces without arms by removing existing upholstry replacing of all unserviceable materials, viz, tapastry, springs, coir fibre, hessain cloth, long cloth, cotton, cane sticks ete, if any to restore the set all as per drg (Serviceable coir fibre, cotton, cane sticks, spring etc retrived shall be reused, but the acrylic tapastry shall be new costing minimum of Rs.350/- per ), complete all as shown on drg and as directed by Engr-in-charge.

Sofa Set 4 pieces :- Refer Drg NoFD-18m, FD-234

Repairs to upholstry of Sofa Set 4 pieces, consisting of a 2 pieces with arms and 2 pieces without arms by removing existing upholstry replacing of all unserviceable materials, viz, tapastry, springs, coir fibre, hessain cloth, long cloth, cotton, cane sticks ete if any to restore the set all as per drg (Serviceable coir fibre, cotton, cane sticks, spring etc retrived shall be reused, but acrylic tapastry shall be new costing minimum of Rs.350/- per ), complete all as shown on drg and as directed by Engr-in-charge.

SOFA SET 4/5 PERSON WITH CUSHION :- FD-281, FD-373

Replacement of existing U/S cushion of Sofa Set with new foam cushion 40 density 100mm thick of approved make duly covered with tapestry cloth including mulmul cloth and steching, rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and shall not less than Rs. 350/- per metre and as approved by GE.

Removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable bearer from Sofa and providing new first class teak wood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by Engr-in-Charge.

CHARPOY NEWAR Refer DrgNo FD-246/247

S&F12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the charpoy frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to 1st quality teak wood long rail as per existing size of charpoy including removal of damaged long rail all as specified on drawing or as directed by Engineer-in-charge.(Each long rail will be measured as single unit)

All as per item No. 4.20 but short rail all as specified on drawing or as directed by Engineer-in-charge. (Each short rail will be measured as single unit)

S&F in reapirs to head board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

All as per item No.4.40 but foot board consisting of 22 x 75mm in section teak battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of teak wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 340mm including 12mm dia half round teak wood beading of both side of head board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to flat iron of mild steel of size 35mm x 5mm, bents to right angle on each corners of Bed ply top all as specified on drawing or as directed by Engineer-in-charge.

CHAIR EASY Refer Drg No FD-203, FD-229 :-

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and providing new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front frame and providing new teak wood front frame including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front/back rail and providing new teak wood front rail complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 1.80 x 0.46 mm cane and border with 3x0.60 mm cane complete all as specified on drawing or as directed by Engineer-in-charge.

CHAIR DINNING Refer DrgNo FD-228 & 279 :-

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable stiffners and providing new teak wood stiffners complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair dining with best quality of approved plastic cane 1.80 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

Chair dining officer Refer Drg No FD/MAP-II/04 :-

Repairs to seat of chair dining officer by replacement of u/s foam coushion with new foam cushion with fabric of 75MM TH 40 density including replacement of 12mm thick ply wood. (tapastry shall be new costing minimum of Rs.350/- Per/M ), complete all as shown on drg and as directed by Engr-in-charge

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front/side rails and providing new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable stiffners and providing new teak wood stiffners complete all as specified on drawing or as directed by Engineer-in-charge.

CHAIR WRITING Refer DrgNo FD 202,FD-250 & 280:-

Removing the existing unserviceable rear leg and providing with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and providing with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and providing new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and providing new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and providing new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired chair writing with best quality of approved plastic cane 1.80 x0.46mm cane and border with 3x0.60mm cane of white or cream/ivory all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

Stool Dressing CB :-

Recaning of Stool dressing with best quality of approved plastic cane half round 2mm wide and 0.4mm thick plastic cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

BIN SOILED LINEN SMALL (750mm x 45mm x 450mm) Refer DrgNo FD-244 :- M&L for the following damaged/ broken parts and supply & fixing in repair of Bin Soiled linen using with the material all as specified on drawing or as directed by Engineer-in-charge.

Replacement of unservicable Top S& F in repairs new top made of 18 mm thick prelaminated particle board exterior grade one side teak faced providind 4mm thick teak wood beading all around rest all as specified and as directed by Engineer-in-charge..

Removing the existing unserviceable front of bin linen small and providing new front with 6mm thick teak faced vineer of approved make all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back of bin linen small and providing new Back with 6mm thick commercial ply of approved make all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Recaning of repaired Bin soiled linen on both sides with best quality of approved plastic cane 2mm wide 0.4mm thick cane and border with 3x0.60 mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge. (Note: Each side wil be mesured as single unit).

Hat Stand with mirror Refer DrgNo FD-233 :-

S & Fixed in repairs new mirror 5 mm thick for Hat stand with mirror of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

Removing of existing unserviceable Back of Hat stand with mirror and providing new Back of 6mm plywood commercial shall be fixed with headless nail, rest all as shown on drg and as directed by Engr-in-Charge.

S&F of brass pegs with brass screw in place of broken/ lost pegs in hat stand with mirror, rest all as shown on drg and as directed by Engr-in-Charge.

SIDE BOARD Refer drg No :-- FD-241 & 1112 :--

Removing the existing unserviceable top of side board and providing new top made out of 18mm thick prelaminated particle board exterior grade all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

Removing the existing unserviceable sides of side board and providing new sides made out of 18mm thick prelaminated particle board exterior grade all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge. (Note : Each side will be measured as single unit)

Removing he existing unserviceable back of Side Board and providing new Back with 6mm thick plywood commercial type of all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable Top drawer and providing New drawer made out of 12 mm thick particle board having ply on both sides. The drawer shall be run as 19 mm x 19 mm thick teak wood batten all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable Drawers (other than Top drawers) and providing new drawer made out of 12mm thick particle board having ply on both sides. The drawer shall be run as 19mm x 19mm thick teak wood bearer all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge. (Note : Each drawer will be measured as single unit)

Removing the existing unserviceable shutter and providing new shutter made out of 18mm thick prelaminated particle board exterior grade including Hinges and lock all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. (Note : Each shutter will be measured as single unit)

Removing the existing unserviceable bottom of side board and providing new bottom of size 1220 x 455 mm made out of 18mm thick plywood commercial type all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

Removing the existing unserviceable leg frame of side board and providing teak wood 2nd class hard wood leg frame all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

Removing the existing unserviceable broken legs of side board and providing new teak wood leg 2nd class hard wood of size 45 x 45 x 125 mm but at bottom 25 x 25 mm all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge. (Note : Each leg will be measured as single unit.)

Table dining 8 personsRefer drg No FD-273 :-

Replacement of existing unserviceable table top for Table dining 8 persons made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table dining 6 personsRefer drg No FD-273/ FD/MAP-II/03 :-

Replacement of existing unserviceable table top for Table dining 6 persons made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table dining 4 persons FD-291 /FD/MAP-II/03

Replacement of existing unserviceable table top for Table dining 4 persons made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table dining 4 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 4 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 4 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Common for Table dining 8/6/4 persons

S&F in repairs Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy FD-278, 34, 382

Replacement of existing unserviceable table top for teapoy made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table center FD-274 / 235

Replacement of existing unserviceable table top for Table centre made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Writing/Medium/Study Refer drg No :-- FD-33 & 275 :--

Table top with 18mm thick prelaminated particle board exterior grade of approved make including 18x4 mm teak wood beeding all as per drg and as directed by Engineer-in-charge.

Legs as per drg

Foot rest as per drg

Stiffener as per drg

Sides of cabinet with 18mm thick pre-laminated particle board as per drg

18mm thick prelaminated particle board Cabinet door & drawer along with locking arrangement and handles as per drg

TABLE PEG Refer drg No FD-236&277 :-

Replacement of existing unserviceable table top for Table peg made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged top rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

TABLE DRESSING GENTS WITH MIRROR Refer drg No FD-230

Replacement of existing unserviceable drawer for Table dressing gents and providing New drawer made out of 12 mm thick particle board having ply on both sides. The drawer shall be run as 12 mm x 12 mm thick teak wood batten all as specified on drawing or as directed by Engineer-in-charge. Note-Each drawer should be measured as single unit

S & Fixed in repairs new mirror 5mm thick of approved make with full frame all as specified on drawing or as directed by Engineer-in-charge.

S & Fixed in repairs new top made out of 18 mm thick pre laminated particle borad exterior grade of approved make, all as specified on drawing or as directed by Engineer-in-charge.

TABLE DRESSING LADIES Refer drg No :-- FD-251 :--

S & Fixed in repairs table top of Table dressing ladies with 18 mm thick pre-laminated particle Board exterior grade of approved make, all as specified on drawing or as directed by Engineer-in-charge.

S&Fixed in repairs new Glass shutters of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit)

Removing the existing unserviceable Aluminium channel and S & Fixed in repairs Aluminium Channel all as specified on drawing or as directed by Engineer-in-charge.

S & Fixed in repairs new back suport made out of 6 mm thick plywood for mirror of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.

S & Fixed in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

Supply & fixing of Knob of aluminium anodized dark brown in shade as approved by GE & in the following furniture items with screws as specified & as directed by Engr-in-Charge:- Side board, Table Writing/Medium/Study, Table dressing gents with mirror & Table dressing ladies with mirror.

Table 3'x2' with/witout drawer FD-283

Replacement of existing unserviceable table top for Table 3'x2' with/witout drawer made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table 3'x2' with/witout drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) fromTable 3'x2' with/witout drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side rail from Table 3'x2' with/witout drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front and back rail from Table 3'x2' with/witout drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge. for the following furniture articles:-

Sofa 3 seater FD-281/373/258

Sofa 2 seater FD-281/373/258

Sofa Chair Single seater FD-281/373/258

Bed Ply top/Bed newar FD-246/ 247

Chair Dining FD-228, FD-279 or Similar

Chair Easy, FD-203,FD-229 or similar

Chair writing, FD-202, FD-250, FD-280 or similar

Stool Dressing FD-282

Bin soil Linen Small FD-244

Hat Stand with mirror FD-233

Side Board FD-241,FD-1112

Table dining 6/8 persons FD-273

Teapoy FD-278, 34, 382

Table centre FD-274 / 235

Table writing FD-33,275,

Peg Table FD-236, FD-277

Table dressing Gents with mirror FD-230

Table dressing Ladies with mirror FD-251

Table 3'x2' with/witout drawer.FD 283

Table ding 4 person FD-291/FD/MAP-II/03

Chair dining officer FD/MAP-II/04

M/s Dimpy Enterprises

KIRAN REED INDUSTRIES

L.BHIMSEN

Ms N D Enterpise