ADDN, ALTN, IMPROVEMENT TO CERTAIN MD ACCN AT CAMP AREA AND TOILETS AT SMC UNDER AGE BR-I OF GE(AF) ADM AREA AT AF STN AGRA.

Amount

Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface should be even and smooth including liquid WPC @ 0.2% by weight of cement complete all as specified and directed.

M&L for rendering 10mm thick on concrete surfaces of ceiling with CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description from ceilings / RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification on internal/ceiling surfaces including preparation of new plastered surface complete all as specified and directed.

M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) as per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture including three coat of white wash complete all as specified and directed.

M&L RCC 1:2:4 ( Type A 1 ) using 20 mm graded aggregate in slabs supported on walls , beams, columns and similar work etc including demolition of cement concrete ( reinforced) of any description in any position not otherwise specially provide for complete all as specified and as directed.

Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed

S&F for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles including dismantling of old tiles complete all as specified and directed.

M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed.

Taking down chowkhats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and not exc. 4.00 Sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking down of shutter from the frames) not exc. 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm and not exc. 2 Sqm each complete all as specified and directed.

Taking down shutter of any description not exc. 1.00 Sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing all as specified and directed.

S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.

S&F Pressed steel frames 125x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Pressed steel frames 105x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L PCC (1:2:4) type C0 using 12.50 mm graded aggregate as infilling in PS Chowkhats complete all as specified .

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick skelton/gauzed shutter factory make open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), supplied and fitted to chowkhats all as specified and directed..

S&F 100 mm size butt hinges Mild steel medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed. .

S&F 300mm long aluminium sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.

S&F rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening of Gde Fe-410-0 or Fe -310-O icluding dismantling of structural steel work in doors, gates but excluding framed truss etc. complete all as specified and directed.

S& F in repair 1mm thick mild steel, plain black sheet in in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint to steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for 20-25 mm thick hand cut kota stone slab flooring or in trades of steps over 15 mm thick screed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing rounding of edges and dismantling of old tiles complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing and taking down rendering etc complete all as specified and directed.

S&F in repairs for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with new trap and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan complete all as specified and directed.

S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F in repair Vitreous china wash hand basin white flat back size 450 x 300mm including 32mm CP brass waste fitting, 45 cm long PVC connection with brass nut at both ends,32mm dia PVC west pipe cast iron brackets and making good disturbed surfaces in CM 1:3 or PCC 1:2:4 complete all as specified and directed .

S&F inrepair pillar taps 15 mm Bore dia cast copper alloy with capstan heads cromium plated fancy type screwed down high pressure with or without lettered 'HOT' or COLD with long screwed for iron pipe complete all as specified and directed.

S&F corner unbreakable glass shelf 10 mm thick set of three with SS brackets fixed to wall with rawl plug and SS bolts complete all as specified and directed.

M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 10 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed.

S&F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

S&F for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm boreand fixed in repair complete all as specified and directed. Make:PRAYAG CAT PART No 8108/Equivalent to Jaguar/MARC

S&F Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap complete all as specified and directed.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union complete all as specified and directed.

S&F CP soap dish fixed to wall with plugs and screws complete all as directed and specified.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer complete all as specified and directed.

S&F Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 915x460 mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade , 32mm bore PVC waste pipe including cantilever angle iron 25x25x3mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I complete all as specified and directed.

S&F plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 900mm X 750mm and assembled with using brass nuts, bolts and washers complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F GI tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia including taking down old pipe complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia including taking down old pipe complete all as specified and directed.

Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 15 mm bore complete all as specified and directed.

Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 20 mm bore complete all as specified and directed.

S&F in repairs 100mm dia stainless steel gratings complete all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.

S&F repairs for 20 mm stop valve, cast iron , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe fixed as in repair complete all as specified and directed..

S&F fix in repairs tripple layer 500 ltrs rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) white in colour hoisted and fixed in position including flot valve complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed..

S&F Cast iron soil, waste and vent pipe, Spun type 100 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified.after including down of existing unserviceable pipe complete all as specified and directed..

S&F CI Cowl Spun type suitable for 100 mm bore pipe as in repair complete all as specified and directed.

S&F Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed.

S&F Salt-glazed stoneware gully traps,Centrifugal type 150x150mm size, square or round mouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as directed and specified.

S&F Cast iron soil, waste and vent pipe, Spun type 75 mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed..

S&F Cast iron soil, waste and vent pipe, Spun type 75 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified.after including down of existing unserviceable pipe complete all as specified and directed..

S&F cast iron floor trap spun type with CP grating including jointing to waste pipe in run lead dia of outlet 75mm including cutting floor and making good to match with existing surface fixed in repair complete all as specified and directed.

S&F Cast iron bends/Tee duck foot or heel rest, radius for 75 mm bore pipe, complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including taking down of old pipe complete all as specified.

S & F bend suitable for 110mm dia PVC (SWR) pipe including clamps complete all as specified and as directed

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement including demolition of old cement concrete complete all as specifie and directed.

M&L for preparation of old treated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster and putting aluminium channel in groove of required size complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L PCC ( 1:2:4) type B0, padding in averaging on RCC roof slab or terrace with using WPC @ 2% by mix weight of cement with finishing even and smooth with using extra cement including demolition of existing cement concrete (unreinforced ) above ground floors n exc 15cm thickness i.e from RCC roof slabs/terrace complete all as specifie and directed.

M&L in repairs for roof treatment with following specification including removing existing :- (i) Cleaning of existing surface properly with steel wire brushes (ii) Applying evenly a tack coat of bitumen primer @ 0.3 kg / sqm (iii) Applying a coat of hot blown bitumen 85/25 confirming to IS - 702 @ 1.2 kg / sqm (iv) Applying and laying 3 mm APP modified memberane weighting not less than 3 kg / sqm in 100 mm over laps both longitudinally and transverrsally and overlaps to be sealing by torch application , memberane shall be taken up to the thickness of slab / front fascia (v) The memberane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3 (vi) PCC Tiles 300x300x25mm laid with cement mortar 1:4 mixed with 5% integral water proofing compound by weight of cement over a 20 mm layer of cement mortar 1:4 and finished neat complete all as specified and directed (Note :- WPC shall be included in this item and work shall be executed through authorised applicator )

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specifie and directed.

S & F anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Top / Bottom 20736=0.547kg/RM complete all as specifie and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing complete with beads fixed with screws in square not exc 0.5sqm in each pane complete all as specifie and directed.

Supply and fixing galvansied wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm including necessary arrangements to fix in aluminium frame complete all as specified and directed.

M&L for plain cement concrete (1:4:8), Type D-2, using 40 mm graded stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under and hauncing against the sides of pipes for 150 mm bore pipes with concrete after the pipes are laid and tested complete, all as specified.

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position complete all as specifie and directed.

S&F pre-laminated PVC solid board as in frames for cupboard shutters 40 mm thick (double sandwiched of 20mm) 75 mm wide prelaminated on one side with wooden finished including taking down existing board any type complete fixed in position in all respect all as specified and directed.

S&F Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws complete all as specified and directed.

S&F Stainless Steel (304 Grade) Finished Handles 150 mm with stainless steel screws complete all as specified and directed.

S&F Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long with stainless steel screws complete all as specified and directed.

S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specifie and directed.

S&F Stainless Steel (304 Grade) Finished Floor Door Stopper with stainless steel screws complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L 75 mm thick PCC type C-2, (1:3:6) using 40 mm graded stone aggregate as in sub base (for levelling of undulations) including demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as specifie and directed.

M&L in repairs for providing and laying 60 mm thick factory made chamfered edge precast Cement Concrete paver blocks (interlocking tiles) of M-35 grade with any colour,design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer,through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for providng and injecting chemical emulsion for post construction anti termite treatment along the external wall below concrete or masonery apron using chemical emulsion @ 2.25 Ltr per liner meter inlcuding drillling and pluging holes etc in apron complete all as specifie and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specifie and directed.

Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and not exc 10 sqm on plan and not exceeding 1.50 metre in depth and getting out complete all as specifie and directed.

Returning filling in, including speading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, in trenches, after the pipes have been laid and tested complete all as specifie and directed.

Removing excavated soil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 metre above the starting point complete all as specifie and directed.

S&F for 150 mm bore, Salt glased stoneware drain pipes (Grade 'A') laid in trenches at any depth including jointing and testing complete all as specifie and directed.

M&L for Plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregates as surface channel/drains inside the manholes and like including weathering, sightly rounded or chamfered angles and throating as directed and provision of necessary formwork to any extent and finished exposed surface even and smooth without using extra cement complete all as specified.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radious, old size built in CM (1:6) including demolition of brick work complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complet all as specified and directed.

M&L for PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching, coping, plinth course, bands stops etc incl necessary form works complete all as specifie and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches pillars etc excl ashlar facing dressed stone work and pre-cast concrete articles complete all as specified and directed.

S&F 15 mm dia two way Bib Tap wall mount chorome finish cast copper alloy fancy type CP with lever handle, screwed down screwed for iron pipe or for brass ferrule complete all as specifie and directed.

S&F in repairs in vitreous china wash hand basin (WHB) ovel type coloured to fixed in stone slab , incl brackets with 32mm dia brass waste coupling fittings and waste pipe incl fancy type brass CP basin mixer for mixing hot & cold water screwed down for iron pipe, 600mm long PVC connection for 15mm bore pipe complete all as specifie and directed.

S&F in repair vitreous china wash down water closet (padestal pattren) white pan and trap, incl. connection to down (or outgoing pipe) and top flushing pipe anti syphonic pipe incl 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle incl brackets with flush pipe of polythelene of low or high density PVC 32mm dia for cistern incl plastic seat cover black closed pattern with flat bottom and cover & MS CP or aluminium hinging device incl 15mm bore ABS body health faucet and 1.25mtr long flexiable pipe and 600mm long PVC connection with PTMT nut complete all as specifie and directed.

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. any type of pipe complete all as specified and directed.

M&L for 100mm thick PCC type D2 1:4:8 (40 mm graded agg) as in sub-base, sub-floors,etc incl demolition complete all as specified and directed.

S&F 50 mm round polished finished stainless steel railing grade SS 202 fitting in staircase complete all as specified and as directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specfied and directed.

M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 1.20 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.

All as per srl item No 115 above but for call bell point complete all as specified and directed.

All as per srl item No 115 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.

All as per srl item No 115 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per Item No 115 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.

M&L for point wiring complete with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area single core drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, complete including 4 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F bell push flush type 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 16 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5/6 amps flush type 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S&F ceiling fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed.

S&F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less thtn 0.95 Make- HALONIX Cat paart No - HLB-03-20-CW-AL-SQ, ORIENT Cat part No-LBLN-20-C-AL /Phlips Cat part No- BN021C LED22S PSU CW GR

S&F in replacement of old U/S tube light fitting with energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Phlips cat part- BN021LED12S6500PSUGR, HALONIX Cat part no HLB-07-10-CW-IP

S&F in replacement of old U/S decorative wall mounting light fittings with opal glass diffuser and stainless steel body suitable for LED lamp 12 Watt (B-22 base) including one number 12 Watt LED lamp complete all specified and directed. Make: HALONIX Cat part No HLWB-01-B22,/Havells - LHFOAJE1TN1I060 /PHLIPS

S&F in replacement enery saving new generation LED 10 Watts, IP-65 bulk head luminarie with opal diffuser complete including making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Make :- ORIENT Cat part No-LIBHP-10-C /Phlips cat part- WT202W LED10S CW PSU S3 PC/ HALONIX-HLBH-02-10-CW-AI

S&F in replacement existing U/S light fitting with energy saving decorative LED batten 05 watt, 230 volts, energy efficient tube light fitting with polycarbonate body & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed.

M&L for taking down carefully existing ceiling fan/exhaust fan for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and painting with Hi-Gloss synthetic enamel paint of approved shade by spray painting after filling cavaties and re-fixing after providing new fan clamp, nuts/bolts, washers, down rod as required and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface all as specified and directed.

S&F exhaust fan 300 mm sweep steel body, AC, Single phase, 230 volts complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan including cutting round hole of required size in wall, grouting of nuts and bolt etc and making good to match the existing surface complete all as specified and directed.

S&F exhaust fan 250 mm sweep PVC body, AC, Single phase, 230 volts complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan including cutting round hole of required size in wall, grouting of nuts and bolt etc and making good to match the existing surface complete all as specified and directed.

M & L for taking down existing meters carefully and depositing to MES store yard or safe custody for reuse/refixing including making all electric connections after necessary repair work carried out including refixing of old serviceablemeters alongwith mentioned below or all as directed. Note:- (i) Minimum 4 sqmm single core FRLS PVC insulated multi-stranded copper conductor cable shall be used for making connections from Meter to DB including providing pin/ bottle type copper thimles . (ii) All wires shall be drawn in PVC flexible conduit of suitable dia. (iii) Cost of materials and labour for inter connector between meters and DB's are deemed to be included in the unit rate quoted. No extra payment shall be allowed for the same.

S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection TPN 415 Volts, 4 way, including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with 100 Amp rated copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S & F MCB single pole 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specifie and directed.

S & F MCB SPN 240 volts, 'C' curv of rating from 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specifie and directed.

S&F in replacement MCB TPN 240 volts, 'C' curve of rating from 40 to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit including taking down old unsv existing sub main wiring and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

S&F in replacement sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

aman construction & general suppliers (BID ID -3174501)

rohan traders (BID ID -3174514)

deva engineers (BID ID -3174448)

M/s M S Sharma and Co. (BID ID -3179552)

Captainkomalchaharconstructions (BID ID -3179733)

C P Singh and Co (BID ID -3179541)