Special repair works to existing 36 Nos. of Warders Quarters at Ariyur for Central Prison, Vellore in Vellore District under Maintenance of Prison building and Staff Quarters for the year 2024-2025. (Re-tender)

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

24 : Manufacturing & supply of steel windows (Weight basis)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

WATER SUPPLY ARRANGEMENTS 51: Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres (excluding free board) of approved brand (superior variety) with ISI Mark

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

61.2: Supplying and laying and loose jointing the following dia stone ware pipes with ISI mark Superior variety (glazed) with spigot and sockets ends in dry conditions and tested with water, after the pipes are laid to proper gradient to the alignment etc., all complete and as directed by the departmental offices. b. 150 mm dia S.W. pipe

Electrical arrangements 74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

ANNEXURE-I 2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) b) In Ground Floor

c) In First Floor

d) In Second Floor

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture d. In Third Floor

10.5.1 : Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") 110 mm tk (B.P.) (using crushed stone sand) with admixture a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

16.1.2 : Precast Jally Ventilator 50mm thick. Using standardised M20 grade concrete Mix. (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

18.1 : Formwork using M.S.Sheet c.For Square and rectangular columns and small quantities

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws a. 900 x 2100 mm

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) with plasticizer

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab a) Providing pit (M20)

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

59.5.1 : Gully Trap using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

71: Supplying and fixing of 16 amps double pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnections and earth connections, cost of all materials etc., all complete.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

80: S & F of 375x300x20mm thick TW plank

87.1: Supplying and delivery of Three phase ELCB/RCCB (Fixed in the existing board - MCB and ELCB/RCCB should be of same manufacture).

211: Clean removal of the old cement plastering from the existing walls and racking out joints 20mm deep or from terraced roofs racking out joints 12mm deep without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant and necessary scaffolding if necessary etc., complete and as directed by the departmental officers.

212: Dismantling the Plain cement concrete and clearing away and carefully stacking the materials useful for reuse and premeasurement and removing the debries as per the instruction of departmental officers

214: Dismantling the old damaged brick work in Cement mortar and clearing away from the work site, including labour charges etc., all complete and as directed by the departmental officers. a) Brick walls under 3m height.

217.1: Dismantling the damaged lime concrete without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

218: Dismantling the damaged one course pressed tiles in cement mortar without affecting the adjacent structures in all floors including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

224: Dismantling the existing damaged R.C.C without affecting the adjacent structures, including the hire charges of tools and plants, and scaffolding if necessary, and clearing the dismantled materials away from the site etc., all complete and as directed by the departmental officers.

237 : Providing two legged scaffolding using 15cm diameter casurina props and planks for the following height etc., all complete and as directed by the departmental officers. 5.5m height in addition of 2.5m ht

243: Dismantling the existing floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs without damaging the existing structure and surroundings and clearing the debris away from the site including cost of required tools and plant etc., all complete in all respect and as directed by the departmental officers.

383: S&F of Cuddapah sink 600 x 600 x 200mm

ANNEXURE - II A1: White washing one coat using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete in all respects.

A2: Painting the old walls with one coat of ready mixed PLASTIC EMULSION PAINT (Inner walls) of first class quality paint of approved colour and shade over a priming coat on old wall surfaces, including cost of materials, thorough Scrapping, necessary brushes, labour charges, patty etc., all complete.

A3: Painting two coats for old wall with ready mixed EXTERIOR PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade over a old wall surfaces, including cost of materials, thorough Scrapping, necessary brushes, labour charges, patty etc., all complete.

A4: Painting the old Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with one coat of approved first class synthetic enamel ready mixed paint of approved quality and brand, with relevant Standard specifications including thorough scrapping, material & labour charges etc., all complete (paints and its shade shall be got approved from the Executive Engineer before using)

A5: Painting the old wood work with one coat of approved Ist class synthetic enamel paint including clean removal of old paint using sand paper as required by the departmental officers including cost of thorough scrapping, material, labour for painting, etc all complete (paints and its shade shall be got approved from the Executive Engineer before using)

A6: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

b) 12 watts LED bulb for bulk head fittings

A7: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A8: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A9: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) - Can be fitted in outside wall with 1320 lumens of light output and etc., Charges for fixing 25W LED lamp street light fittings

A10: Supplying and delivery of following dia UPVC, PVC specials of best and approved quality having ISI mark including cost of specials and delivery at site of work etc., all complete and as directed by the departmental officers. a) 32mm dia UPVC ball valve

b) 25mm dia UPVC ball valve

c) 32mm dia UPVC Tank Nipple

d) 25mm dia UPVC Tank Nipple

A11: Labour charges for removing the existing PVC tank including labour charges for removing the pipe connection etc., all complete and as directed by the departmental officers.

A12: Labour charges for re-fixing the existing PVC tank including labour charges for cleaning the tank, re-fixing with specials and pipe connection etc., all complete and as directed by the departmental officers.

A13: Cleaning of the existing septic tank by using compressor septic tank pump of 5000 liters capacity tanker lorry including loading, cost of hire charges for machinares, labour charges and conveyance the septic tank sluge away from Town and as directed by the departmental officers.

A14: Removing & Cleaning and stocking the existing wet waste materials (terrace) like Bottles, Old cloths, waste debris and garbages mixed with slushy mud due to prolonged stagination of waste water due to OHT over flow water. The above works has to be carried out by manully (Head load) etc., complete and as directed by the departmental officers.

A15: Supply and fixing 5Amps flush type switch including fixing the existing switch board etc., all complete and as directed by the departmental officers.

A16: Supply and fixing 5Amps flush type two way switches including fixing the existing switch board etc., all complete and as directed by the departmental officers.

A17: Supply of 5 amps 5 pin plug socket with 5 amps flush type switch including labour charges for fixing the existing board etc., all complete and as directed by the departmental officers.

A18: Supplying and fixing 16 amps 3 pin plug type socket in the existing switch board including removing the existing socket from hylem sheet, refixing the new socket and necessary connections etc., all complete and as directed by the departmental officers.

A19: Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open Wiring).

A20: Supplying & Delivery of 3 1/2 core 50 Sq.mm PVC Aluminium armored LTUG cable with ISI mark(1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A21: Supplying & Delivery of 3 1/2 core 35 Sq.mm PVC Aluminium armored LTUG cable with ISI mark(1100V) earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete in all respects and as directed by the departmental officers.

A22: Labour Charges for fixing of UG Cable of size of 4 to 25 Sq.mm and 2/3,3 1/2 and 4 core on wall / ceiling charges for fixing of UG cables with necessary MS clamps, brass screws including cost of materials and redoing the dismantled portion in the original position etc., all complete and fixing of UG cables on walls and ceiling etc., as directed by the departmental officers. (Above ground level)

A23: Supplying and fixing of Bus bar panel boardc100 Amps capacity made up of 16 SWG MS box of size 18''x15'' for single phase 2 wires system with 25mm x 3mm tin coated copper flats for phase and neutral including interconnections by copper flat, labour charges etc., all complete and as directed by the departmental officers.

A24: Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., all complete and as directed by the departmental officers.

N SARAVANAN (BID ID -1331482)