DAY TO DAY MAINTENANCE AND CERTAIN B/R REPAIRS TO OTM ACCN AT INS UTKROSH, NAD DOLLYGUNJ, NTS TEYLERABAD, MARCOSM CHOULDARI DAM AND PROTHRAPUR FILTERATION PLANT UNDER AGE B/R NO. II AT GE MINNIEBAY, PORT BLAIR

Amount

M&L for preparation of old surface applying one coat of oil bound distemper on old wall surfaces complete all as specified and as directed. Note : Scaffolding at any height shall be included in the qouted rate

M&L for preparation of old surface and applying one coat of oil bound distemper on ceiling surfaces complete all as specified and as directed. Note : Scaffolding at any height shall be included in the qouted rate

M&L for preparation of old surface and applying two coats of oil bound distemper on old wall surfaces complete all as specified and as directed. Note : Scaffolding at any height shall be included in the qouted rate

M&L for preparation of old plastered wall surfaces and applying one coats of acrylic wheather coat emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and as directed. Note : Scaffolding at any height shall be included in the qouted rate

M&L for preparation of old plastered wall surfaces and applying two coat of acrylic wheather coat emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and as directed. Note : Scaffolding at any height shall be included in the qouted rate

M&L for preparation of old plastered wall surfaces and applying one coat of cement based paint as per manufacturer's instructions complete all as specified and as directed. Note : Scaffolding at any height shall be included in the qouted rate

M&L for applying one coat of indigo paint on paver block or paver blocks chequered tiles all as directed

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed..

Demolition of Precast Concrete work/ precast concreteblock built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry using PCC, Type C-5 solid blocks, exceeding 10 cm in width and setting in Cement Mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M&L for rendering 5 mm thick in Cement Mortar 1:4 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

M&L for rendering 15mm thick in concrete or brick surface in CM 1:4 even & smooth without using extra cement.

Supply only integral water proofing compound [ISI marked] of approved make.

M&L for prepartion of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over and including alkali resistant primer etc complete as directed.

M&L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of primer all as per manufacturer's instructions complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not other wise described not exceeding 10cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

Taking down carefully loose and broken concrete by chiselling / picking etc upto a depth of 80 tor 100mm from columns, beams and similar structural members, cutting edges, cleaning the surfaces so obtained after removing loose and broken concrete with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 m including necessary scaffolding etc., complete all as specified and as directed.

M&L for applying one coat of anti corrosive primer @0.25 Ltr/Sqm to exposed surfaces of old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film as per manufacturer's instructions complete all as specified and as directed.

M&L for applying one coat epoxy bonding agent @ 1 ltr/2.6 Sqm or as per manufacturer's instructions to old concrete surfaces of RCC floors, columns, beams and similar structural members for bonding with new concrete complete all as specified and directed.

M&L for non shrink, cementitous micro concrete (Renderoc RG of Fosroc or equivalent) mixed with 12.5 graded stone aggregate by weight (18 Kg Aggregate 25 Kg Renderoc RG) respectively (as per manufacturer's instruction) laid in average thickness 80 to 100 mm in surfaces of columns, beams and similar structural members including use and waster of water tight form work to facilitate pouring of micro concrete complete all as specified and as directed.

Taking down carefully loose and broken concrete by chiselling/picking etc upto a depth of 20 to 40mm from columns, beams,roof and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 m including necessary scaffolding etc., complete all as specified and as directed.

M&L for application of high build polymer modified cement mortar (1:2.5) mixed with 3 ltrs SBR per bag of cement on concrete surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nitobond SBR (1 Ltr SBR + 1 Ltr) water + 3 Kg cement)as in wall/ceiling applied as per manufacturers instruction, including necessary scaffolding etc. complete all as specified and as directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as grills, gratings gates, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L Mild steel, plain, black 1.25mm thick sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets or welded to frame work of steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

S&F Mild Steel work as in Tubular Trusses, Posts/ railing etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed.

S&F mild steel works as in small articles such as hold fast MS flats wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters etc.of flat iron bent to shape making holes etc complete.

M&L for MS work such as fencing post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) Mild steel Angles, bars, flats etc., including all necessary drilling, bolting or riveting, etc., and similar work confirming to Fe-290 Gde E-165 complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. and similar work confirming to Fe 410-W(Gde-E- 250) quality-.AFe

M&L for two coats of Synthetic Enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces of any description, over 10 cm width or girth, not otherwise described including preparing new steel surfaces complete ll as specified and directed.

Dismantling of Plain or Corrugated Steel sheeting of any gauge, thickness of roof in roof coverings, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

S&F in repairs Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting.

S&F in repairs aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

S&F in repairs "E" Board classic 4mm thick oceanic sheet of size n.exe. 610x610mm size fixed in ceiling with clips to aluminum snap grid including preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.

Demolition of concrete in any position not otherwise specified andas required to faciliate demolition

M&L for Providing, cement concrete Type B0 1:2:4 (12.5mm graded stone aggregate) in PCC padding / levelling coarse on roof slab, kerbs or mud stops, rounded or chamfered on edges, laid over RCC roof finished even and fair without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid seprately.

M&L for providing 10 mm thick rendering on cement concrete surfaces in cement mortar (1:4) mixed with water proofing compound whilst the concrete is green, finished even & smooth without using extra cement compete all as specified and directed. Note : WPC will be measured & paid separately.

M&L for preparing of surface and apply one coat of DR Fixit prime seal & applying two coats of Newcoat Ezee of dry film thickness 600 microns on plastered surfaces of roof or walls with rollers on old or new plastered surfaces as per manufactuerr instructions with all necessary safety arrangements.

M&L for 75 mm thick cement concrete 1:2:4 type B–2 using 40mm graded stone aggregates as in flooring finished even and smooth without using extra cement all as specified and directed.

M&L for Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggregate as in foundations, filling and mass concrete.

M&L for PCC 1:5:10, Type E-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Filling /sunken floor etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in copings etc all as specified and directed

Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness

M&L for precast cover slab with 1:2:4 type B1 using 20mm graded stone aggregate incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified incl removal of existing unserviceable cover slab.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm all as specified and directed.

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M&L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.18 but not exceeding .38 sqm , 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L for glazed Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

M&L for Glazed Ceramic Tiles, Coloured, of size 450X 300X 7 to 8mmmm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L for 300 x 300 x 8-10mm thick coloured vitrified heavy duty chequered tiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and as directed.

S&F Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, of size 600x600 mm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to matchScreed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1;6

M&L for Vetrified ceramic tiles 10 mm thick dark shade (square/ rectangular) polished / Double Charged/ Ultra charged, size 600 x 600 mm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match and set in 15 mm thick screed bed or bedding layer in CM 1:6 in floors

S&F Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, of size 600x600 mm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match in vertical surfaces dado skirting of mortar 10 mm thick for laying floor finishes IN CM 1;4

M&L for Machine pressed precast concrete interlocking paver block glossy finish any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade

M&L for crused Sand filling under floors or in foundations including watering and consolidation

S&F cement concrete coloured chequered tiles 30 cm x 30 cm x25 mm thick set,jointed in neat cement slurry and pointed with coloured cement to match, over and including 15 mm thick screed bed or bedding layer in CM 1:6 as in floors / steps etc. complted as specified

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.

M&L for granite slabs ( of any type ) 20 mm thick machine cut,edge rounding, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing as in cooking plat form,over and including 15 mm thick screed bed or bedding layer in cm 1:4 etc. complete as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as specified and directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each complete all as specified and as directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sqm complete all as specified and as directed.

Taking down Shutters of any description n. exceeding 1.00 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Refixing Shutters of any description in same opening n. exceeding 1.00 Sq.m each complete all as specified and as directed.

Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Resecuring (or) Easing and Adjusting without taking down shutters of any description not exceeding 1.00 Sq.m each complete all as specified and as directed.

Resecuring (or) Easing and Adjusting without taking down shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube in opening complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain (rudraksh) colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & manufacturer's instructions complete all as specified and as directed.

S&F in repairs 18mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade fixed with screws to wooden frames complete all as specified and as directed. as in cup board shutters, shelves & partition.

S&F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with 3 mm thick lipping/frame to match.

S&F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

Cutting holes in brick walls but in brick walls built in cement mortar or cement lime mortar not exc. half brick in cement concrete 1:2:4

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel Tower Bolt of size 100 mm size of extruded section complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed.

S&F in repairs Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed.

S&F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Aluminium anodised Handle, of extruded section Fabricated Type of size 100mm long complete all as specified and as directed.

S&F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S&F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 100mm long complete all as specified and as directed.

S&F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

M&L in Repairs for anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick. and fixed with aluminium wire staples with existing or new wooden beading complete all as specified and as directed.

S&F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed.

S&F in repairs 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified and as directed.

S&F Floor Door Stopper of size 100 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S&F in repairs Floor Door Stopper of size 100 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S&F in repairs Continuous [Piano] Hinges, Mild Steel, Bright finish or electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and as directed.

S&F Anodised Aluminium frames for doors, partitions, Windows and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skelton doors, windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium anodised XPM of size 3.00x1.5mmx22 gauge, sheet glass, aluminium grill and particle board fixed to aluminium frame all as specified and as directed. Note : (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges etc. (ii) 5mm thick sheet glass, aluminium grill, particle board and aluminium XPM shall be measured and paid separately if necessary. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

Supply only 5mm Plain sheet glass.

Supply only 5mm figured glass.

Supply only anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick.

Supply only aluminium anodised grill DG(102)(10mm in width) of Decogrille weight not less than 3.26 Kg per square metre, any make as specified and directed.

S&F in repairs aluminium anodised grill DG(102)(10mm in width) of Decogrille weight not less than 3.26 Kg per square metre, any make as specified and directed.

S&F 12mm thick, Prelaminated Particle Board, One Side Decorative Choice Lamination and other side Balancing White, Medium Density, Interior Grade fixed with screws to wooden frames complete all as specified and as directed. as in cup board shutters, shelves & partition.

Taking down aluminium window / ventilator shutters of any size from the existing aluminium window / ventilators, adjusting the aluminium section members, oiling /greasing for easy functioning of windows and refixing the shutters including taking down MS grill and refixing in the existing frame all as directed. Supply only of hinges, handles, aluminium sections glass, mesh etc shall be measured and paid separately.

S&F in repairs stainless steel curtain rod of 20 to 25 mm dia

S&F in repairs brackets stainless steel chromium plated suitable for curtain Rod 25 mm dia complete all as specified and as directed.

S&F in repair, aluminium frictional stay hinges for aluminium window shutters complete all as specified and as directed.

S&F in repair aluminium alloy handle with locking arrangment for aluminium windows complete all as specified and directed

S&F in repair Door closer hydraulically regulated, aluminium body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Hacking out old brocken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

M&L 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 4 mm thick frosted Sheet glass, glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F in repairs plastic water closet seat cover white/black, closed pattern with flat bottom, and cover & milld steel chromium plated or aluminium hinging device all as specified, approved & directed

S&F in repairs one piece closet white colour of size 690 x 370 x 645mm or equivalent size with integrated cistern seat cover and twin flush fittings with P or S trap complete all as directed.

S&F in repairs Vitreous China Squatting Pan "Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. (excluding cistern and flush pipe) including S or P Trap & provision of concrete bedding and making good to floor all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) EWC white in colour[excluding flushing cistern and flush pipe] and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and as directed.

S&F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with pedestal with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repair vitreous china urinal flat back large white colour of Size 345 x 320 x 560 mm or equivalent half stall with including urinal spreader of PTMT any colour with 15 mm dia pipe min6imum wt 60 gms complete all as specified and as directed.

S&F in repairs corner glass shelf 300 mm with ABS brackets 300x600 or equivalent complete all as specified and as directed.

Refixing wash basin on existing brackets any size including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S&F in repairs by replacing minor parts like flushing knob, float, screws etc complete of PVC flush tank low level cistern 10 ltr capacity including connecting to existing water supplyline and water closet pan complete all as specified and as directed.

S&F in repairs PVC flexible connection, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank etc, all as specified.

S&F in repairs Stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated and including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete all as specified and as directed.

S&F in repairs Stainless steel kitchen sink, made of stainless steel 1 mm thick, with plugs, washers and Waste Fittings, 32 mm dia, Brass, Chromium plated and including bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets and connecting union to pipe, overall size 495mm X 420mm, bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

S&F in repairs Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed.

S&F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.

S&F in repairs towel ring of Brass finish glossy of size 180 x 176 x 64 mm or equivalent size.

S&F in repairs Towel rack Brass finish glossy of size 650 x 230 x 110 mm or equivalent size.

M&L for securing glass of any description in metal frames.

S&F in reparis Pillar Taps superior quality, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Pillar Taps standard quality, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 32/ 40mm half/ full thread waste fittings, brass, chromium plated for glazed ware sinks and basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs to Bib Taps superior quality, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle of screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs to Bib Taps standard quality, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs Stop cock superior quality concealed Chromium plated cast copper alloy fancy type screwed down high pressure with crutch or butterfly handles screwed both ends.Bore of pipe 15 mm complete all as specified and as directed.

S&F in repairs Stop cock standard quality chromium plated cast copper alloy fancy type screwed down high pressure with crutch or butterfly handles screwed both ends bore of pipe 15 mm complete all as specified and as directed.

S&F in repairs Angular cock 15 mm dia standard quality, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed.

S&F in repairs Angular cock with flange 15 mm dia superior quality , cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed.

S&F in repairs to Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

Fixing only in repairs Bib Taps/ pillar tap 15mm dia including cleaning, removing of air block etc of any type and size.

Fixing only in repairs Stop Valves/ angular cock , 15 mm dia including cleaning, removing of air block etc of any type and size.

S&F in repair chromium plated health faucet with 1000mm PVC pipe for 15 mm bore with fittings complete all as specified and directed.

S&F in repairs brass chromium plated over head shower rose 150/ 160 mm round /square revolving type 225 mm with flange suitable for 15 mm bore pipes complete all as specified and as directed.

S&F in repairs CP brass wall mixer with wall bend 2 in 1 all as specified and directed.

S&F in repairs 32/40mm dia PVC flexible Waste Pipe, 650-750 mm long fixed to Wash Hand Basin or Sink in repairs complete all as specified and directed..

S&F in repairs stainless steel sink coupling of 110 mm dia all as specified and directed

S&F in repair 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repairs PVC Body Cabinet Box Mirror of size 400mm X 500mm PTMT alloy of approved design and pattern complete all as specified and directed.

S&F in repairs Soap Dish, CP Brass all as specified and directed.

S&F Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 25mm dia bore pipe confirming to ISI Marked complete all specified and as directed.

S&F in repairs PTMT Graiting square or rounded 100 /150mm size [Minimum weight 100 Grams] without waste hole or with waste hole to insert waste pipe complete all as specified and directed.

S&F in repairs GI chain link fencing PVC coated of any size 50mmx50mm mesh including fixing of MS flat iron,rod & bolt to fencing post all as specified and directed. Note : The supply only of flat, rod& bolts shall be measured seprately.

S&F in repairs aluminium concertina barbed tape wire fencing of 610 mm dia of coil when unstretched to be provided on the top of compound wall includings clips as per manufacturer instructions completed all as specifed and directed.

Dismantling boarding or including partition, any description, fixed in any position with screws

M&L for 17-20mm thick HDF board including decorative laminates on both sides one side plain and other side decorative fixed to framework completed all as specified and directed.

S&F Ball catches/ Magnetic catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed including complete all as specified and directed.

M&L for 100mm Extruded brass handles, fabricated type polished all as specified and directed.

S&F 75 mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed all as specified and directed.

S&F Cupboard locks round type suitable for cupboard and Drawers all as specified and directed.

S&F Hasp & staple, safety type, brass with mild steel hinge pin including bolt to hinge plate with screws 100mm size complete all as specified and directed.

S&F Continuous [Piano] Hinges, Mild Steel, Bright finish or electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000ltrs capacity double layer hoisted and fixed in position including Dismantling of water tanks and removing to store all as specified in SSR Part I.

S&F polyethylene water storage tanks cover top for 500/1000ltrs capacity water tanks all as specified in SSR Part I.

S&F teak wood lipping frame 6 mm thick 18/19 mm width fixed with nails/screws

S&F in repairs CI soil,waste and vent pipe pipe 75mm dia any length with or without ears, with cement joint fixed to wall etc all as specified and directed.

S&F in repairs CI soil,wast and vent pipe pipe 100mm dia any length with or without ears, with cement joint fixed to wall etc all as specified and directed.

S&F in repair CI bend(any radius) 100mm bore of pipe diminishing pieces with/without oval access door.

S&F in repair CI bend(any radius) 75mm bore of pipe diminishing pieces with/without oval access door.

S&F in repair CI branch pieces 100mm ,single (equal or unequals)ordinary or inverted(spigot or socketed type)or with parallel branches with/without access door.

S&F in repair CI branch pieces 75mm, single (equal or unequals) ordinary or inverted (spigot or socketed type) or with parallel branches with/without access door.

S&F in repair CI cowls 100mm bore of pipe.

S&F in repair CI cowls 75mm bore of pipe.

Taking down shrubs / vegetation growth from crevices completely, upto any height with all safety equipements all as directed and specified.

S&F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed.

S&F in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 in repairs mm bore PVC [SWR] Bends /shoes of any radius including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 75 mm bore PVC [SWR] Bends/shoes of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) T single equal or unequal with access door 75mm dia

S&F in repair 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 75mm dia out let, PVC (SWR) Floor Trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap,plain with grating 100 mm with incl jointing with solvent cement .

S&F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down take pipes complete all as specified and as directed.

S&F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 110 mm bore PVC [SWR] Bends/shoes of any radius including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 110 mm bore PVC [SWR] Bends/shoes of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC (SWR) T single equal or unequal with access door 110mm dia

S&F in repair PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement

S&F in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

Taking up or down old/chocked water tubings 20mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor all as directed

Taking up or down old/chocked water tubings 25/32mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor all as directed

Refixing old steel tubing and connections 20 mm Bore of pipe in new or old position walls, ceiling, flooring etc. complete all as specified and as directed.

Refixing old steel tubing and connections 25/32mm Bore of pipe in new or old position walls, ceiling, flooring etc. complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified for the sollowing sizes :-

S&F Brass Elbow CPVC PIPE outer diameter 20mm

S&F Brass Tee CPVC PIPE outer diameter 20mm

S&F male brass threaded adaptar CPVC PIPE for the following outer diameter :

S&F female brass threaded adaptar CPVC PIPE for the following outer diameter :

S&F tank adaptar CPVC PIPE outer diameter 25 mm

S&F union CPVC PIPE for the following outer diameter :

S&F ball valve CPVC PIPE for the following outer diameter :

M&L for preparation of old surfaces and applying one coat of fire resistant paint an on wall / ceilings etc complete all as specified and directed Note : Scaffolding at any height shall be included in the qouted rate

M/s Shiva Engineering

BISAKHA PLUMBING WORKS

KRISHNA TRADING COMPANY