CERTAIN RERAIR REPLACEMENT TO FLAME PROOF FITTINGS AND FIXTURES IN AMN SHEDS POL DEPOT WITH ALLIED WORKS INCLUDING PAINTING SERVICING REWINDING OVERHAULING OF CEILING EXHAUST WALL FANS AIR CIRCUCULATOR UNDER GE NARANGI

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) from board/outlet boxes including fittings and fixtures such as switches, ceiling rose, regulator, socket, batten holder, conical shade and light fittings, etc. removing materials from the site and making good disturbed surfaces of walls, floors, etc. complete all as directed and as specified.

Dismantling of old unserviceable flame proof fittings for height not exceeding 20 feet for repairs/replacement complete all as specified and as directed.

Supply and fix CMRI certified flame proof 1 x 16/20W LED light fitting, IP 65, 100 lumen per watt including one No 16/20 watt LED tube and all connected accessories,complete all as specified and as directed. . Make :- Cat No. EXTN 1LT8-16/20 (Model- FIAMMA-II) of Crompton or equivalent in Sudhir/Phillips

Supply and fix CMRI certified flame proof 2 x 16/20W LED light fitting, IP 65, 100 lumen per watt including two No 16/20 watt LED tube and all connected accessories,complete all as specified and as directed. . Make :- Cat No. EXTN 2LT8-16/20 (Model- FIAMMA-II) of Crompton or equivalent in Sudhir/Phillips

Supply and fix CMRI certified LED flame proof Well glass luminaires die-cast aluminium housing with heat resistant toughned glass IP66 protection,125 lumen per watt including lamp 30W and all accessories ,complete all as specified and as directed. . Make: Cat No. LWV-12-30-(CDL)HP (Model- Supra Ultra-I) of Crompton or equivalent in Sudhir/Phillips

Supply and fix in repairs CIMFR certified switch, flame proof, rotary type, with terminal box in LM6 ,10/16A single pole 250V complete all as specified and as directed. Make Crompton/ Sudhir/Phillips/ Bajaj/Shyaam

Supply and fix in repairs CIMFR certified switch, flame proof, rotary type, Direct Entry in LM6 ,10/16A double pole 250V complete all as specified and as directed. Make Crompton/ Sudhir/Phillips/ Bajaj/Shyaam

Materials and labour for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conduit conclead with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed.

All as per item serial No 08 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item No 08 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board

All as per item serial No 08 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

Supply and fix switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed..

Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush typecomplete all as specified and as directed.

Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush typecomplete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix stepped type electronic fan regulator, two module size, flush typecomplete all as specified and as directed.

Supply and fix lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as specified and as directed.

Supply and fixing in repair batten type LED light fitting 1x 20W, 220V,AC decorative type with internal SPD upto 4kV and overload voltage protection upto 440V including flexible copper conductor cable of suitable size from ceiling rose complete all as specified .

Supply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repair LED building security light of capacity 60 Watt made up of pressure die cast aluminium housing with high power LED as light source and lens embedded PC cover including electronic driver should have luminaire efficacy ≥110 lumens/watt,CRI>70 ,PF > 0.95,CCT=5700±300,IP66,impact resistance IK 07 ,inbuilt protection against lightning , over voltage , short circuit and surge/spike protection upto 10kV including connection with PVC insulaed PVC sheathed, multistranded copper conductor cable of size 1.5 sqmmX 3 core from light fitting to ceiling rose complete all as specified and as directed.Note : Item no 19 to 21 contractor shall furnish return warranty of 5 yrs on Rs 100/- stamp paper.

Materials and labour for GI bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape all as directed, length of GI Pipe shall not be less than 2.0 metre for fixing of light fittings including taking out old bracket complete all as specified and as directed.

Materials and labour for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete complete all as specified and as directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Materials and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete complete all as specified and as directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Materials and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete complete all as specified and as directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Materials and labour for wiring with 2 runs of 1.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia steel conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and any type of conduit and any height and structure complete complete all as specified and as directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Materials and labour for wiring with 2 runs of 2.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia steel conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and any type of conduit and any height and structure complete complete all as specified and as directed. Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Supply and fix in repair/replacement for factory made, sheet steel distribution boards, TPN, 4 Way, IP:43 Protection double door, IK09 with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate all as directed.

Supply fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way IP:43 Protection with 200 A rated bus bar IK09 and grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate complete all as specified and as directed.

Supply fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate.

Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs complete all as specified and as directed.

Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs complete all as specified and as directed.

Supply and fix in repair/replacement MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed.

Supply and fix in repair for MCCBs 415 V, 16 KA, 4P, 63 Amps complete all as specified and as directed.

Materials and labour for Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to GI wire 4mm dia upto 7.5 mitre by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old complete complete all as specified and as directed.

Taking down ceiling fans 1200 /1400 mm sweep of any make/description ,sealing cable ends, and transporting to workshop for carrying out full servicing , greasing of bearing/bush after through cleaning / washing with petrol, cleaning the fan blades and body with red harpic, replacement of worn out/defective parts (wherever necessary) assembling the same and refixing on same location incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction complete all as specified and as directed. Note :- (i) Replaced parts shall be measured and paid separately as Supply only item. (ii) The cost replacement of unserviceable parts is deemed to be included in the quoted rates.

Materials and labour for painting of metal body ceiling/exhaust fan complete, with one coat of synthetic enamel paint by mechanical spray machine including through cleaning the dust/oil/grease etc. and filling cavities with filler material including writing MES Number with black paint complete all as specified and as directed.

Taking out burnout winding and rewinding ceiling fan of 1200/1400mm sweep of any make/description with super enamelled copper wire of existing guage incl all insulating materials varnishing and heating complete incl satisfactory testing of fan on full load to entire satisfaction complete all as specified and as directed.

Taking out burnout winding and rewinding of old model heavy duty ceiling fan of 1200/1400mm sweep of any make/description with super enamelled copper wire of existing guage incl all insulating materials varnishing and heating complete incl satisfactory testing of fan on full load to entire satisfaction complete all as specified and as directed.

Supply only fan bearing of size 6201/6202 suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. Make : NBC/SKF/TATA

Supply only rubber reel suitable for existing size and make of fan, complete all as specified and as directed.

Supply only shackle clamp suitable for existing size and make of fan, complete all as specified and as directed.

Supply only bolts, nuts and washers suitable for existing size and make of fan, complete all as specified and as directed.

Supply only split pins suitable for existing size and make of fan, complete all as specified and as directed.

Supply only pre painted down rod made of 15mm dia mild steel pipe heavy grade, 45 cm long incl machining/ threading/drilling hole of size suitable for nuts and bolts washer and split pin suitable for existing size and make of fan complete all as specified and as directed.

Supply only upper and lower plastic canopy suitable for existing size and make of ceiling fan fixed with SS screws complete all as specified and as directed.

Taking down heavy duty mettalic exhaust fan of 200mm to 450mm sweep of any make/description and transporting to workshop for carrying out full servicing , greasing of bearing/bush after through cleaning / washing with petrol, cleaning the fan blades and body with red harpic, replacement of worn out/defective parts (wherever necessary) assembling the same and refixing on same location incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction complete all as specified and as directed. Note :- (i) Replaced parts shall be measured and paid separately as Supply only item. (ii) The cost replacement of unserviceable parts is deemed to be included in the quoted rates.

Taking down exhaust fan of 200mm to 300 mm sweep of any make/description and transporting to workshop for carrying out full servicing , greasing of bearing/bush after through cleaning / washing with petrol, cleaning the fan blades and body with red harpic, replacement of worn out/defective parts (wherever necessary) assembling the same and refixing on same location incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction complete all as specified and as directed. Note :- (i) Replaced parts shall be measured and paid separately as Supply only item. (ii) The cost replacement of unserviceable parts is deemed to be included in the quoted rates.

Taking down heavy duty air circulator fan of size 400 to 600 mm sweep of any make/description and transporting to workshop for carrying out full servicing , greasing of bearing/bush after through cleaning / washing with petrol, cleaning the fan blades and body with red harpic, replacement of worn out/defective parts (wherever necessary) assembling the same and refixing on same location incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction complete all as specified and as directed. Note :- (i) Replaced parts shall be measured and paid separately as Supply only item. (ii) The cost replacement of unserviceable parts is deemed to be included in the quoted rates.

Taking down wall fan of size 200mm to 400mm sweep of any make/description and transporting to workshop for carrying out full servicing , greasing of bearing/bush after through cleaning / washing with petrol, cleaning the fan blades and body with red harpic, replacement of worn out/defective parts (wherever necessary) assembling the same and refixing on same location incl provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction complete all as specified and as directed. Note :- (i) Replaced parts shall be measured and paid separately as Supply only item. (ii) The cost replacement of unserviceable parts is deemed to be included in the quoted rates.

Taking out burn out winding and rewinding the armature for 200mm to 300mm sweep exhaust fan of any make/description with super enamelled copper wire of existing guage with and including all insulating materials varnishing complete all as specified and as directed.

Taking out burn out winding and rewinding the armature for 200 to 450mm Heavy Duty mettalic exhaust fan any make with super enamelled copper wire of existing guage with and including all insulating materials varnishing complete all as specified and as directed.

Taking out burn out winding and rewinding the armature for air circulator fan 400 to 600mm any make with super enamelled copper wire of existing guage with and including all insulating materials varnishing complete all as specified and as directed.

Taking out burn out winding and rewinding the armature for wall fan 200 to 400mm any make with super enamelled copper wire of existing guage with and including all insulating materials varnishing complete all as specified and as directed.

Supply only ball bearing of size suitable for exhaust/wall fan upto 450 mm sweep complete all as specified and as directed. Make : NBC/SKF/TATA

Supply and fix in repairs for condenser ISI marked 230/240/250 volts AC 4 MFD suitable for exhaust fan incl condenser spacer and soldering of condenser wire to fan wire complete all as specified and as directed. (Make :Havells Cat No:4MFD/440V/PLWW/28X5 or Universal/EPCOS).

Supply and fix in repair/ replacement of unsv fan capcitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as specified and as directed.Make-Universal Make :Havells Cat No:2.25MFD/440V/PLWW/28X52 or Universal/EPCOS).

Goswami Traders (BID ID -3087968)

M/s JK Jangid and Company (BID ID -3089468)

SANJAY KRISHNA HAZARIKA (BID ID -3090644)

M/s Dhani Enterprise (BID ID -3090016)

PURBANCHAL BUILDERS (BID ID -3089028)

M.G. ENTERPRISE (BID ID -3088136)