GE(S)/M-59/2020-21

Amount

M&L for demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work (EXCEPT BRICKS) sub class brick 'B' (old size) bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for dismantling existing barbed wire fencing with angle iron post embeded on wall and refixing the same on new or old locations after repairing etc, including removal of deberies out of MoD land complete all as specified and directed. NOTE:- PCC for bed block and painting to post shall be measured and paid separately under respective items of BoQ.

M&L for taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of deberies out of MoD land complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of wall in cement mortar 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of wall in cement mortar 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering surfaces in cement mortar 1:3 as on ceiling,top surface of chajjas/facia of roof projections etc, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distamper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather paint over a coat of alkali resistant primer including, complete all as specified and directed.

M&L for complete removal of existing treatment of any description on walls and applying 2mm thick wall care putty and two coats of oil bound distemper over a coat of primer after preparation of existing surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of any description on wall and applying two coats of exterior weather coat paint over a coat of alkali resistant primer after preparation of existing surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices, washing down etc. and applying one coat of oil bound distemper, white or tinted, complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices, washing down etc. and applying one coat of cement based paint, complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices, washing down etc. and applying one coat of exterior weather coat paint, complete all as specified and directed.

M&L for preparation of old surfaces of wood work of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old surfaces of steel or iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for form work to sides of flat, rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical to batter complete all as specified and directed.

M&L for form work to sides and soffits of flat, rough finished surfaces of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for form work to sides of square, rectangular or polygonal, rough finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels, shelves complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for demolition of (unreinforced) cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Providing chemical emulsion for post constructional antitermite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in surface channels, drains and the like etc. including necessary form work, complete all as specified and directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. including necessary form work, complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors, pavings etc, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for filing of sunken floor with PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) including breaking and removal of existing filling of lime concrete/PCC/brick bats, including removal of debries out of premises, complete all as specified and directed.

M&L for two coats of hot blown bitumen on newly plastered or unplastered surfaces of sunken portion complete all as specified and directed.

M&L for 40mm bore water tubes 'light grade' galvanised, including short lengths, fixed as spout as in walls of sunken portion of toilets complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregates) as in floors, including finishing the surface of concrete topping even and rough complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic (joint free) coloured/wooden finish tiles 7 to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for non skid ceramic (joint free) coloured/wooden finish tiles 7 to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in skirting/dado etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10mm thick plaster in CM 1:4 for laying wall tiles,complete all as specified and directed.

Demolition of (reinforced) cement concrete of any description and in any position not otherwise specifically provided for including removal of debries out of premises complete all as specified and directed. Note:- (reinforcement cut as required to facilitate demolition)

M&L for rolled mild steel framed work as in grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.410-W complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.and similar work con- forming to Fe.410-W complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc, including dismantling of existing old plain or corrugated asbestos cement sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc, complete all as specified and directed.

M&L for False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer, including taking down complete existing ceiling board & grid work etc of any type/pattern complete all as specified and directed

M&L gypsum ceiling board of size 595mmx595mmx9.5mm including repalcement of unserviceable line wire with 4mm dia incl. repairing/realignment of grid of any description complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but not exc 4.00 Sqm each, complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) area n.exc 1.5 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm Wenga/Teak colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing.

S&F 30mm thick Factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specifications & drawing.

S&F butt hinges, 100mm long, medium weight, cold rolled, mild steel, ISI marked, complete all as specified.

S&F 200mm long, aluminium anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified.

S&F aluminium handle, cast type, anodised of size 150mm long, ISI marked, complete all as specified.

S&F PVC solid frame fixed in Cupboard with x-sectional area of frame between 8 Sqcm to 15 Sqcm, complete all as specified and directed.

S&F factory made 18mm (+ 0.7mm) thick PVC sheet one side prelam sheet for cupboard shutter of density 600kg/Cbm bent 90° and finish at all edges at level for making edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape etc, complete as per direction of Engineer-in-Charge and manufacturer's specifications.

S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed.

S&F hasp and staple of size 100mm, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with SS screws, complete all as specified.

S&F continous (Piano) type hinges, mild steel, bright finish or electrogalvanised with wide of flaps 30mm, complete all as specified and directed.

S&F stainless steel bright finish handles for cabinet/cupboard shutter of size 150mm long, ISI marked, complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing pipe, complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down existing pipe, complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" 15mm bore stop / angle valve with flange, cast copper alloy (ISI Marked), chromium plated, screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 20mm bore stop cock with flange, cast copper alloy (ISI Marked), screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 25mm bore stop cock with flange, cast copper alloy (ISI Marked), screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F as ion repair 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F stainless steel grating doom 75mm dia, fixed in floor, complete all as specified and directed.

Fixing only "as in repair" Vitreous china wash hand basin, including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F in replacement Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.

S&F in replacement PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F in replacement Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including supply and fixing of spreader, CP coupling, waste pipe and all necessary fittings complete all as specified and directed.

S&F in replacement Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement CP shower rose with or without swivel joints of 150mm x 150mm size with CP brass arm of 375mm long including fixing to iron pipe or union, complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F "as in repair" 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Desilting and cleaning of blocked strom water drain/nallaha and culvert etc, by removal of mud, soil, aggregates, debries manually and removal to a distance exc. 50m but n. exc. 100m and depositing in low lying area, etc complete all as specified and directed.

S&F 5mm thick coloured/printed solid PVC sheet as in wall panelling/lining for fixing on brick masonry wall and solid PVC partitions inclusive of 5mm thick and 35mm wide vertical PVC beading fixed with machine screw with a horizontal spacing of 300mm c/c at site incl. demolition of existing lining of any description complete all as specified and directed.

S&F 3mm thick PVC sheet fittet/corner strip of width upto 35mm above wall paneling work, complete all as specified and directed.

Cutting out carefully existing PCC of size 50mmx100mm at junction of wall cladding and roof slab with diamond cutter and filled the top 50mm with paving bitumen 85/25 grade over 50mm thick appoxy grout incl. watering, cleaning etc complete all as specified and directed.

abrol enterprises

Ravinder Singh

Walia trading co